Abstract:Cement industry is estimated to account for ~6–7% of anthropogenic CO 2 emissions globally. Therefore, the identification of innovative solutions for their mitigation is both a priority and a challenge. The integration of carbon capture and storage technologies into the industrial production process is considered among the most viable solutions for this purpose, and calcium looping (CaL) represents one of the most promising. A key research challenge points to maximize process efficiencies and minimize production cost to decouple cement production from carbon emissions. The carbon capture process proposed in this work is a looping system where CO 2 is absorbed by calcium oxide (CaO) in the first reactor (carbonator) and the calcium carbonate (CaCO 3 ) produced is regenerated in an oxy-fired calciner. During calcination, CO 2 is released from the sorbents, purified, compressed, and then made available for geological storage. In this study, greenhouse gas (GHG) emissions related to two cement production systems with CaL carbon capture are evaluated: the tail-end CaL carbon capture and the integrated CaL carbon capture. The carbon footprint is complemented with the assessment of the resources depletion mineral and elements and the demand of primary energy. An eco-design approach was pursued by carrying out a life cycle assessment to identify the environmental hotspots and which CaL integration approach presents a higher potential for cement industry decarbonization. The results of the analysis were compared with a conventional cement production process. The results show that the GHG emissions may be reduced by 74% with a tail-end approach and 71% when the CaL is fully integrated into the cement production process. When a future perspective, with higher penetration of renewable energy resources into the electricity sector, was modeled, the results showed that CaL integrated into the clinker production process is more promising in terms of reduction of the carbon footprint, rather than the tail-end solutions. Primary energy consumption from non-renewables is substantially impacted by CaL, with the integrated CaL configuration showing to be a more efficient solution because of less primary energy consumption (coal).

Utilization of calcite-rich Green Liquor Dregs (GLD) by-products from pulp and paper industry: Cement clinker production and life cycle analysis

Chemical characterization of green liquor dregs from 16 Swedish pulp and paper mills between 2017 and 2019

Utilization of Coal Gangue and Copper Tailings As Clay for Cement Clinker Calcinations

Utilization of pretreated green liquor dregs as an activator for blast furnace slag: Effect on hydration, phase assemblage, and rheology

Life cycle assessment of beneficial use of calcium carbide sludge in cement clinker production: A case study in China

Recycled glass powder for enhanced sustainability of limestone calcined clay cement (LC3) mixtures: mechanical properties, hydration, and microstructural analysis

Reduction of clinkerization temperature by using phosphogypsum

The Utilization of Lime-Dried Sludge As Resource for Producing Cement

Calcium carbonate and reactive silica recovery from waste cement: The influence of processing parameters on upcycled material properties and carbon intensity

Carbon sequestration through mineral carbonation: Using commercial FGD-gypsum from a copper smelter for sustainable waste management and environmental impact mitigation

Effect of Industrial Byproduct Gypsum on the Mechanical Properties and Stabilization of Hazardous Elements of Cementitious Materials: A Review

Utilization of Lime-Dried Sludge for Eco-Cement Clinker Production: Effects of Different Feeding Points

Synthesis and Characterization of Cement Clinker Using Waste Glass and Oyster Shells as Natural Ore Substitutes

Ferritic calcium sulfoaluminate belite cement from metallurgical industry residues and phosphogypsum: Clinker production, scale-up, and microstructural characterisation

Comparative life cycle assessment (LCA) of geopolymer cement manufacturing with Portland cement in Indian context

Exploring the Potential for Utilization of Medium and Highly Sulfidic Mine Tailings in Construction Materials: A Review

Integrated Utilization Of Sewage Sludge And Coal Gangue For Cement Clinker Products: Promoting Tricalcium Silicate Formation And Trace Elements Immobilization

Evaluating the Carbon Footprint of Cement Plants Integrated With the Calcium Looping CO2 Capture Process

Comparative environmental assessment of limestone calcined clay cements and typical blended cements

Utilization of Carbonated Alkaline Solid Wastes in Ordinary Portland Cement-Metakaolin-limestone Ternary Mixture: Underlying the Role of Low Grade-Sustainable Calcium Carbonate Sources

Sustainable clinker-free solid waste binder produced from wet-ground granulated blast-furnace slag, phosphogypsum and carbide slag