Abstract:Utilizing a 2D MXene nanocoating on titanium surfaces grooved by laser surface texturing (LST) achieves a significant 70% reduction in the friction coefficient and minimal substrate wear. This strategic integration of LST with lubricative 2D material nanocoating delineates a groundbreaking methodology for substantially improving the tribological performance of metals, showcasing a cutting‐edge advancement in materials science applications. The inferior tribological properties of titanium (Ti) and its alloys, due to their limited work hardening capability and the mechanical instability of their oxide scale, pose substantive challenges in practical applications. Surface texturing and the application of 2D material coatings are acknowledged as efficacious strategies for enhancing these properties. Nevertheless, the rapid loss of effectiveness when employing these methods in isolation highlights a significant limitation. Herein, a 50‐nm‐thick MXene nanocoating is deposited onto groove‐textured pure Ti surface, effectuating a reduction in the coefficient of friction (COF) from ≈0.57 to 0.17, thereby substantially mitigating wear on the Ti substrate. The grooved surface architecture plays a vital role in storing MXenes and facilitating lubricant replenishment through the stirring effect of frictional stress during subsequent friction process. Further, the continuous decomposition and reorganization of MXene coating results in the formation of a robust tribofilm that resists oxidation and plastic deformation in the subsurface layer, markedly enhancing the friction and wear resistance. These findings are crucial for improving tribological performance in Ti and its alloys and provide a straightforward yet effective strategy for tailoring their tribological properties by integrating LST with 2D material nanocoating.

Tribological properties of AISI 4140 steel reinforced by bioinspired topological texture and multi-solid lubricants under starved lubrication

Topology optimization of AISI 4140 steel with surface texture filled by multi-solid lubricants for enhancing tribological properties

Synergetic effects of biomimetic microtexture with multi-solid lubricants to improve tribological properties of AISI 4140 steel

Wear-triggered self-repairing behavior of bionic textured AISI 4140 steel filled with multi-solid lubricants

Improving tribological properties of Ti–Zr alloys under starved lubrication by combining thermal oxidation and laser surface texturing

The Experiment Research and Engineering Verification on the Synergistic Lubrication Properties of Silver and Multiwalled Carbon Nanotubes

Effects of Curved Microchannel Surfaces with Sn-Ag-Cu and MXene-Ti3C2 on Tribological Performance of M50 Bearing Steel in Solid–Liquid Composite Lubrication System

Simple Synthesis of the Composite Coating and the Lubrication Mechanisms of the Spherical SnAgCu–Al2O3

Synergistic lubrication effects of Sn–Ag–Cu and MXene–Ti 3 C 2 to improve tribological properties of M50 bearing steel with microporous channels

Improving tribological performance of metallic coatings: A synergy of gradient structure and solid lubricant modification

Combining Carbon Nanoparticle Coatings and Laser Surface Texturing for Enhanced Lubricity Under High Loads

Tailoring Tribological Characteristics in Titanium Alloys by Laser Surface Texturing and 2D Ti3C2Tx MXene Nanocoating

Synergistic Tribological Effects of Ti3C2Tx MXene and ZDDP under Simple Grafting Strategies for Efficient Lubrication

Tribological Properties of Groove-Textured Ti-6Al-4V Alloys with Solid Lubricants in Dry Sliding against GCr15 Steel Balls

Improving the Antifriction Behaviors of Steel by Hybrid Treatments of MoS2 and Surface Texture

The Tribological Properties of a Mineral Additive in Lubricating Oil on Steel/Al-Sn Alloy Friction Pair

A Pocket-Textured Surface for Improving the Tribological Properties of Point Contact under Starved Lubrication

Effect of Multi-Walled Carbon Nanotubes on Tribological Properties of Lubricant

Controllable interface-tailored strategy to reduce the nanotribological properties of Ti3C2Tx by depositing MoS2 using atomic layer deposition

A Synergetic Effect of Silver and Carbon Nanotubes on the Tribological Behavior of TiAl-Based Composites

High Temperature Tribological Performance of Steel/Copper Friction Pairs Lubricated with a Modified C-WS2-(Fe3O4 + TiN) Nanoadditives in Non-Copper Coated Solid Wires