Abstract:Background With the current rapid economic growth, demands for energy are progressively increasing. Energy shortages have attracted significant attention due to the shrinking availability of non-renewable resources. Therefore, thermal energy storage is one of the solutions that lead to saving of fossil fuels and make systems more cost-effective by the storage of wasted thermal energy. In particular, the application of phase change materials (PCMs) is considered as an effective and efficient approach to thermal energy storage because of the high latent heat storage capacity at small temperature intervals. Nevertheless, leakage problems and low thermal conductivity limit the practical applications of PCMs. Therefore, form-stable phase change materials with high thermal conductivity are urgently needed. Results A novel form-stable composite phase change material was prepared by incorporating PEG into waste sawdust with 5% EG. In the composites, PEG served as a phase change material, while waste sawdust acted as a carrier matrix. EG was added to help increase the thermal conductivity of the composites. The melting temperature of CPCMs-4 with 5% EG was found to be 58.6 °C with a phase change enthalpy of 145.3 kJ/kg, while the solidifying temperature was 48.5 °C with a phase change enthalpy of 131.4 kJ/kg. The thermal conductivity of CPCMs-4 with 5% EG increased by 23.8% compared with that of CPCMs-4. Moreover, no obvious changes in melting, solidifying temperature, or latent heat after 200 heating–cooling cycles were detected. The supercooling extent of CPCMs-4 with 5% EG decreased by 19.2% compared with PEG. The volume change properties and wettability properties of CPCMs-4 with 5% EG are suitable for thermal energy in terms of practical application. Conclusions The prepared composites have excellent thermal and form-stable properties and they can be recognized as potential candidates for thermal energy storage as form-stable composite phase change materials. Using simple impregnation techniques with waste sawdust as a supporting material, this study demonstrates an innovative technology for practically and markedly enhancing the adsorption capacity of phase change materials.

Fabrication of shape-stable glycine water-based phase-change material using modified expanded graphite for cold energy storage

Investigation on thermal energy storage characteristics of form-stable phase change materials supported by graphene aerogel

Surfactant Hydrophilic Modification of Expanded Graphite to Fabricate Water-Based Composite Phase Change Material with High Latent Heat for Cold Energy Storage

Hydrophilic modification of expanded graphite to develop form-stable composite phase change material based on modified CaCl<sub>2</sub>.6H<sub>2</sub>O

High Performance Form-Stable Expanded Graphite/stearic Acid Composite Phase Change Material for Modular Thermal Energy Storage

Engineering nanocellulose/graphene hybrid aerogel for form-stable composite phase change materials with high phase change enthalpy for energy storage

Polyethylene glycol based shape-stabilized phase change material for thermal energy storage with ultra-low content of graphene oxide

Graphene aerogel stabilized phase change material for thermal energy storage

Experimental and analytical studies on latent heat of hydrated salt/modified EG-based form-stable composite PCMs for energy storage application

Design of a graphene oxide@melamine foam/polyaniline@erythritol composite phase change material for thermal energy storage

Preparation and performance of modified expanded graphite/eutectic salt composite phase change cold storage material

Effect of Expanded Graphite Size on Performances of Modified CaCl2·6H2O Phase Change Material for Cold Energy Storage

Study on Energy Storage Performance of Thermally Enhanced Composite Phase Change Material of Calcium Nitrate Tetrahydrate

A Phase Change Material Encapsulated in a Mechanically Strong Graphene Aerogel with High Thermal Conductivity and Excellent Shape Stability

Carbon nanotubes modified graphene hybrid Aerogel-based composite phase change materials for efficient thermal storage

Research on Modified Expanded Graphite/eutectic Salt Composite Phase Change Material in Cold Chain Transportation

Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage

Synthesis of the Polyethylene Glycol Solid-Solid Phase Change Materials with a Functionalized Graphene Oxide for Thermal Energy Storage

SiO2 hydrophilic modification of expanded graphite to fabricate form-stable ternary nitrate composite room temperature phase change material for thermal energy storage

Preparation and characterization of myristic acid/expanded graphite composite phase change materials for thermal energy storage

Polyethylene glycol/carboxymethyl cellulose/montmorillonite composite phase change materials for thermal management