Abstract:Formation mechanism of the composite phase change material: A composite phase change material was prepared using bamboo charcoal (BC) embedded with polyethylene glycol (PEG) as PCM and low density polyethylene (LDPE) as matrix. Phase change materials (PCMs) are often used as building materials to reduce the energy consumption. However, conventional PCMs are susceptible to leakage and have a short service life. To solve this problem, thermal energy storage (TES) composites were fabricated by using bamboo charcoal (BC) encapsulating polyethylene glycol (PEG) as the PCM and low density polyethylene (LDPE) as the matrix. The shape and structure of BC and BC‐plastic composites were examined using scanning electron microscopy, X‐ray diffractometry, and mercury intrusion porosimetry. Differential scanning calorimetry, thermogravimetry (TG), and infrared thermography were used to characterize the manufactured TES composites. Physical and mechanical strength assessments were also conducted. The results demonstrated that: (1) BC possessed a rich void structure with a porosity of 61.4%, which could be used to adsorb PEG and the composites was a combination of PEG, BC, and LDPE with no chemical reaction; (2) thermal tests demonstrated that the composites exhibited favorable temperature regulation properties, featuring a maximum latent heat capacity of 29.1 J/g along with suitable phase change temperatures, yet thermal durability needs to be improved much further, addition of PEG reduced thermal conductivity of the composite from 0.38 to 0.34 W/mK; (3) the addition of PEG was beneficial for the impact strength but had a negative impact on the flexural and tensile properties; and (4) due to their satisfactory thermal performance and acceptable mechanical properties, these TES composites can be effectively utilized as building materials for temperature control purposes. Highlights Bamboo charcoal (BC) had a large number of pores that can encapsulate polyethylene glycol (PEG). PEG/BC performed satisfactory latent heat. Low density polyethylene was used as the matrix to realize the second encapsulation of phase change material. Thermal energy storage composites had excellent stability and good heat storage capacity. PEG incorporation negatively affected flexural and tensile properties.

A novel composite phase change material of high-density polyethylene/d-mannitol/expanded graphite for medium-temperature thermal energy storage: Characterization and thermal properties

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Structure, Characterization and Thermal Properties of the Form-Stable Paraffin/High-Density Polyethylene/Expanded Graphite/Epoxy Resin Composite PCMs for Thermal Energy Storage

Composite phase change materials of ultra-high molecular weight polyethylene/paraffin wax/carbon nanotubes with high performance and excellent shape stability for energy storage

Thermal properties of 1-hexadecanol/high density polyethylene/graphene nanoplates composites as form-stable heat storage materials

Preparation and Thermal Properties of N-Eicosane/nano-sio2/expanded Graphite Composite Phase-Change Material for Thermal Energy Storage

Thermal Properties of 1-Tetradecanol/Polyvinyl Butyral Composite Phase Change Materials with Expanded Graphite for Latent Heat Storage

Preparation and characterization of myristic acid/expanded graphite composite phase change materials for thermal energy storage

Modified Supporting Materials to Fabricate Form Stable Phase Change Material with High Thermal Energy Storage

MXene-decorated bio-based porous carbon composite phase change material for superior solar-thermal energy storage and thermal management of electronic components

Preparation and Characterization of Bio-Based PLA/PEG/g-C3N4 Low-Temperature Composite Phase Change Energy Storage Materials

Thermal and mechanical performance assessment of composite (CPCM) for energy storage

Preparation, Characterization, and Thermal Properties of Microencapsulated Phase Change Material for Low-Temperature Thermal Energy Storage

Plastic composite of bamboo charcoal stabilized polyethylene glycol with thermal energy storage and temperature regulation for building energy efficiency

Design of a graphene oxide@melamine foam/polyaniline@erythritol composite phase change material for thermal energy storage

Expanded waste glass/methyl palmitate/carbon nanofibers as effective shape stabilized and thermal enhanced composite phase change material for thermal energy storage

Polyethylene glycol/carboxymethyl cellulose/montmorillonite composite phase change materials for thermal management

Synergistic phase change and heat conduction of low melting-point alloy microparticle additives in expanded graphite shape-stabilized organic phase change materials

Preparation and thermal properties of palmitic acid @ZnO/Expanded graphite composite phase change material for heat storage

A structured phase change material integrated by MXene/AgNWs modified dual-network and polyethylene glycol for energy storage and thermal management

Thermal Properties of Myristyl Alcohol/polyvinyl Butyral/carbon Nanotubes As Composite Phase Change Materials for Thermal Energy Storage