Abstract:Laser powder bed fusion (LPBF) offers several key advantages, including design flexibility, the ability to produce complex geometries and the fabrication of porous materials. These advantages have greatly expanded the range of applications for products manufactured using LPBF. Recently, there has been a significant increase in the use of LPBF products in thermal applications. In these applications, which involve intricate solid–fluid interface interactions, and thermal and surface properties of solids play a crucial role in heat flow interactions. This study focused on producing samples using the LPBF method with three different alloys: 316L, CoCrW and Ti6Al4V. The samples were subsequently analyzed for relative porosity, liquid retention, and thermal and surface properties. The influence of various laser process parameters, specifically energy density, on these properties was examined. The production processes conducted at various energy densities yielded porosity levels of approximately 7-32%, 2-20% and 3-16% for 316L, CoCrW and Ti6Al4V materials, respectively, in comparison with the theoretical density. Thermal conductivity values for 316L, CoCrW and Ti6Al4V samples ranged from 15.1 to 12.9, 7.9 to 7.1 and 6.1 to 5.8 W/m.K, respectively. Similarly, the average surface roughness was observed to vary in the range of 7.5-9.6, 8.3-10.5 and 8.9-10.3 μm for 316L, CoCrW and Ti6Al4V samples. Based on the obtained results, the samples were evaluated in terms of their suitability for thermal applications. Among the investigated alloys, 316L alloy is determined to have potential for thermal applications (extended surface applications, transpiration cooling, etc.) due to its efficient liquid retention feature, relatively high thermal conductivity and moderate surface roughness. Moreover, the 316L stainless steel proved to be more cost-effective, as it allowed for production at low energy density and had a relatively affordable material cost. Additionally, relatively easy porosity controlling in 316L alloy LPBF productions and leveraging its ability to fabricate porous structures hold great promise for further advancements in thermal application products.

The Effect of Epoxy Resin on the Infiltration of Porous Metal Parts Formed through Laser Powder Bed Fusion

Effect of higher laser power remelting on porosity and mechanical performance of part built by laser powder bed fusion

In-Situ Characterization of Pore Formation Dynamics in Pulsed Wave Laser Powder Bed Fusion

Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding

Evolutionary Behavior of Haynes 230 Powder During Laser Powder Bed Fusion Cycle and Its Effect on the Mechanical Performance of Manufactured Parts

Benchmarking of Print Properties and Microstructures of 316L Stainless Steel Laser Powder Bed Fusion Prints

Reduction of Process Induced Porosity for Ultrafuse 316L through Parameter Optimization of Creality Ender 3 V2 and Makerbot Method X

A Review and a Statistical Analysis of Porosity in Metals Additively Manufactured by Laser Powder Bed Fusion

Understanding keyhole induced-porosities in laser powder bed fusion of aluminum and elimination strategy

High-throughput investigation of laser powder bed fabricated Inconel 718 alloy: Fabrication, microstructure and performance

A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion

Effect of Laser Powder Bed Fusion Parameters on the Evolution of Melt Pool, Densification, Microstructure, and Hardness in 420 Stainless Steel Parts

Promoting the densification and grain refinement with assistance of static magnetic field in laser powder bed fusion

Pore defects in Laser Powder Bed Fusion: Formation mechanism, control method, and perspectives

Powder recycling effects on porosity development and mechanical properties of Hastelloy X alloy during laser powder bed fusion process

CT scan, EBSD and nanoindentation analysis of 3D-printed parts with post-process heat-treatment

Fabrication of Particle-Stacking Microporous Metal Using Laser Powder Bed Fusion

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Laser Powder Bed Fusion of Powder Material: A Review

Effect of heat treatment and electroless Ni-P coating on mechanical property and corrosion behaviour of 316L stainless steel fabricated by laser powder bed fusion

Effects of Laser Powder Bed Fusion Process Parameters on Porosity, Liquid Retention, and Thermal and Surface Properties for 316L, CoCrW and Ti6Al4V Alloys