Abstract:Synthesis methods of composites. Copper‐based metal–organic frameworks is anticipated to find applications in the field of friction materials owing to its plentiful surface‐active groups and distinctive framework structure. In this study, copper‐based metal–organic frameworks was synthesized through ultrasound‐assisted method and incorporated alone into carbon fiber reinforced epoxy composites or together with SiO2 nanoparticles towards the goal of improving the composites' friction and wear properties. It is revealed that copper‐based metal–organic frameworks alone cannot improve the friction and wear of carbon fiber reinforced epoxy composites simultaneously. The combination of copper‐based metal–organic frameworks and SiO2 nanoparticles was more effective in enhancing both the mechanical and tribological properties of studied composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s. Additionally, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3 N/m. Through morphological and chemical analysis on the worn surfaces and transfer films, the functioning mechanism of copper‐based metal–organic frameworks in modifying the mechanical and tribological properties was discussed. It was discovered that a tribological synergy exists between short carbon fibers, copper‐based metal–organic frameworks, and SiO2 fillers, leading to a shift in the wear mechanism of the composite materials from abrasive wear to adhesive wear. Concurrently, a shear‐prone transfer film forms on the surface of the counter steel surfaces. Findings of the present study pave a new route of designing high performance epoxy based tribo‐composites by using metal–organic frameworks. Highlights Cu‐BDC nanosheets were synthesized using ultrasound‐assisted techniques and incorporated as tribological fillers in EP composites. The combined use of Cu‐BDC, SiO2, and SCF fillers synergistically enhances the mechanical and tribological properties of EP composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3N/m. During the sliding friction process of the composite materials, Cu‐BDC and SiO2 play a crucial role in reducing SCF pull‐out wear through their anchoring effect. The dynamic coordination bond structure of Cu‐BDC contributes to the formation of uniform and continuous transfer films on counter metal surfaces.

Mechanical and tribological performance of copper matrix self-lubricating composite prepared by resonant acoustic mixing powder

Long-term Ball Milling and Hot Pressing of In-Situ Nanoscale Tungsten Carbides Reinforced Copper Composite and Its Characterization

Mechanical and tribological properties of WC particles reinforced Cu-20Zn matrix composites

WC-Ni-Cr-based Self-Lubricating Composites Fabricated by Pulsed Electric Current Sintering with Addition of WS2 Solid Lubricant

Dry sliding tribological properties of Cu-WS 2 self-lubricating composites at 25–500 °C

Development of Cu-15Ni-8Sn/MoS 2 self-lubricating composites with desirable mechanical and friction properties

Improving comprehensive performance of copper matrix composite by spray pyrolysis fabricated CNT/W reinforcement

The effects of ultrasonic vibration on mechanical properties of tungsten particle-reinforced copper-matrix composites

Tribological synergy of copper‐based metal–organic frameworks, carbon fibers and SiO2 in modifying the friction and wear properties of epoxy composites

Multiphase strengthening mechanism of Cu-Y2O3/W composites prepared by mechanical alloying

Microstructure, mechanical and tribological properties of Cu-Sn/Cr3C2/Gr composites

Tribological and Electrochemical Corrosion Behaviors of Cu-based Powder Metallurgy Composites Reinforced by In-Situ WC with Different Morphology

Multilayered W-Cu composites with enhanced strength, electrical conductivity and wear resistance

Tribological behavior and mechanism of h-BN modified copper metal matrix composites paired with C/C–SiC

Microstructure and high-temperature mechanical properties of Cu-W composite prepared by hot isostatic pressing

Effects of WC Particles on the Microstructure and Properties of Copper Matrix Composites by Selective Laser Melting

Investigation on Microstructure Characteristics and Tribological Properties of Self-Lubricating Metallic Composites Based on Hexagonal Boron Nitride and Molybdenum Disulphide

Fabrication and Tribological Properties of Copper Matrix Solid Self-Lubricant Composites Reinforced with Ni/NbSe2 Composites

Effect of Ti3SiC2 replacing graphite on the microstructure and properties of Cu-Sn matrix composites

High-pressure synthesis and performance analysis of WC-cBN-MoS2 self-lubricating ceramic composites

Mechanical and tribological properties of FeS/Cu–Bi self-lubricating materials reinforced with copper-plated steel fibers