Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Gears are critical machine elements that transmit power and motion in diverse implementation fields. Over time, gears may produce a series of faults due to harsh operating conditions, fatigue, manufacturing errors, etc., leading to severe performance degradation. During the meshing process, the stiffness of a single tooth controls the load sharing, vibration, and noise characteristics of a geared system. An undetected fault could decrease the gear stiffness and thus may lead to a fatal breakdown, substantial economic losses, or even human casualties in safety-critical applications such as helicopters, high-speed trains, and wind turbines. Hence, the accurate quantification of the gear stiffness emerges as an important research area to obtain reliable gear designs. With this in mind, the asymmetric tooth concept offers superior bending strength, fatigue propagation life, and the ability to lessen vibration over the standard (symmetric) designs in applications where unidirectional loadings are predominant. This study investigates the influence of tooth root cracks on the single-tooth and meshing stiffness characteristics of the standard and asymmetric involute spur gears. To this end, the numerical crack propagation paths obtained in our previous works were introduced to the created 3D CAD geometries. Subsequently, the single tooth stiffness of both healthy and cracked (2 5%-50%-75%-100%) gears was calculated through the ANSYS® Workbench, and the time-varying mesh stiffness was obtained. The present study evaluated the effects of backup ratio and the tooth asymmetry on the spur gears' meshing stiffness characteristics simultaneously and further expanded the scope of the research work. The results indicated that the single tooth stiffness and mesh stiffness could be improved by 35% and 22%, respectively, as the drive side pressure angle increased from 20° to 35°. It has been noted that the gear stiffness decreased as the crack level increased, while the increment of the backup ratio further increased the reduction in the stiffness. The findings could provide significant outputs for a better understanding of the influence of tooth asymmetry on the gear dynamics characteristics, life prediction, and early fault diagnosis.

Effect of Tooth Profile Modification on Tooth Root Stress of Spur Gear Pump

Suitable Design of Tooth Profile Modification for Noise Reduction in Spur Gear Pump

Study on Tooth Profile of Involute Conjugated Internal Gear for High-Pressure Internal Gear Pumps

Tooth Profile Modification of Helical Gears and Experimental Study Based on Finite Element Contact Analysis

Vibration and Sound Noise Analysis on Spur Gear Pump

Development of a free-form tooth flank optimization method to improve pitting resistance of spur gears

Analysis and Optimization of Tooth Surface Contact Stress of Gears with Tooth Profile Deviations, Meshing Errors and Lead Crowning Modifications Based on Finite Element Method and Taguchi Method

Tooth wear effects on spur gear dynamics

Influences of tooth flank finishing after fine particle shot peening on tooth surface texture and fatigue life of vacuum carbonitrided gears

Wireless measurement and dynamic contact analysis on the root stress of a light-load spur gear drive

Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation

Effect of tooth surface wear on dynamic characteristics of spur gear transmission system

Investigation of Effect of the Tooth Profile Modification on the Engagement Characteristics of the Gear Pair

Development of Stress Distribution of Composite Gear Tooth Reinforced by Nano-CaCO3, using Finite Element Analysis and its Correlation with Experience

Static/dynamic Contact FEA and Experimental Study for Tooth Profile Modification of Helical Gears

Optimization of Gear Tooth Surfaces

An improved dynamic model of spur gear transmission considering coupling effect between gear neighboring teeth

Influence of tooth root cracks on the mesh stiffness of asymmetric spur gear pair with different backup ratios

Research on noise reduction of drive axle hypoid gear based on tooth surface mismatch modification

Effects of tooth modifications on the dynamic characteristics of thin-rimmed gears under surface wear

A New Tooth Profile Modification Method of Cycloidal Gears in Precision Reducers for Robots