Abstract:During the evolution of gearboxes, unwanted noise has been one of the most discussed subjects. Increasing demands on weight reduction and compactness of gearboxes, while preserving the same torque capacity, require optimal design of all parameters involved. Quiet running is especially desirable in a modern automotive gearbox. The very complicated geometry of helical gears, engenders the problem of a multi-variable optimization procedure. Errors of the microform as well as the macroform of the gears highly influence the sound activation. Effects of the macroform have been studied by many researchers and are widely known and predictable. Normally, finishing processes, such as grinding and honing, are used to achieve the predicted macroform of a gear tooth. As a consequence of applying these processes, the microform of the tooth is accomplished.This paper is concerned with the characterization of the gear tooth surfaces obtained with such processes. The characterization is performed with respect to the surface functional properties. These parameters which are interesting due to the noise activity, were identified when the literature available in the field of interest was reviewed. 3D measuring technique, form removal, functional filtering, and 2D spectral density analysis have been utilized in order to extract this information as surface functional parameters.Since the main aim of this paper is to discuss how to produce gears with optimal noise consequences, the principles of RZP-grinding, Fässler honing and Hurth green-shaving are discussed. During this work, the most significant process parameters have been identified utilizing two-level fractional factorial experiments, based on 3D evaluation of surfaces. The parameters identified together with the process principles were then used to predict the surface characteristics. Optimal strategies concerning all processes for production of low noise gears are suggested. The validity of arguments and results regarding the RZP-process was examined, while gears from a real manufacturing shop-floor were evaluated.

Suitable Design of Tooth Profile Modification for Noise Reduction in Spur Gear Pump

Effect of Tooth Profile Modification on Tooth Root Stress of Spur Gear Pump

Study on Tooth Profile of Involute Conjugated Internal Gear for High-Pressure Internal Gear Pumps

Investigations of the Micro Surface Shape for the Gear-Shaft/journal-bearing Interface in Water Hydraulic Internal Gear Pumps

Vibration and Sound Noise Analysis on Spur Gear Pump

Simulation and Experimental Study of the Influence of Tooth Profile on the Pressure Pulsation of an External Gear Motor

Research on noise reduction of drive axle hypoid gear based on tooth surface mismatch modification

Tooth Profile Modification of Helical Gears and Experimental Study Based on Finite Element Contact Analysis

Optimization of Gear Tooth Surfaces

Study On Acoustic Performance Of A Water Muffler For Gear Pump

Effect of the Tooth Surface Waviness on the Dynamics and Structure-Borne Noise of a Spur Gear Pair

Gear design Optimization for Low-Contact Temperature of a High-Speed , Non-Lubricated Spur Gear Pair

Study on Effect of Relief Groove Angle Expressing the Position in Reducing Noise of Swash Plate Axial Piston Pump

An improved dynamic model of spur gear transmission considering coupling effect between gear neighboring teeth

A Study on Noise Reduction of Gear Pumps of Wheel Loaders Based on the ICA Model

Investigation of Effect of the Tooth Profile Modification on the Engagement Characteristics of the Gear Pair

A Novel Tooth Surface Modification Methodology for Wide-Faced Double-Helical Gear Pairs

Optimal Design of Rotor Profile of Internal Gear Pump for Noise Reduction

Influence of Different Modified Gears on the Vibration and Noise of Electric Vehicle Reducer

Impact of Gear Modification on Gear Dynamic Characteristics