Abstract:Al0.6CoFeNi2V0.5 high entropy alloy was successfully designed and prepared via the nonconsumable arc-melting process, and it was annealed at 600 °C, 800 °C, and 1000 °C for 4 h. Its microstructure and mechanical properties were studied. The as-cast alloy consisted of FCC and BCC phases, and no phase transformation occurred during annealing at 600 °C. Hard Al3V-type metal compounds precipitated during annealing at 800 °C, and BCC particles precipitated in the FCC matrix during annealing at 1000 °C. After annealing, the strength and hardness of Al0.6CoFeNi2V0.5 high-entropy alloy both showed a decreasing trend, because the annealing process eliminated the internal stress in this alloy. However, as the annealing temperature increased, the strength and hardness of the Al0.6CoFeNi2V0.5 high-entropy alloy samples gradually increased. This is because the hard Al3V metal compounds precipitated when the annealing temperature was 800 °C, which produced the "second phase strengthening" effect. At 1000 °C, the larger volume fraction of the hard and fine BCC phase (21.81%) diffusely precipitated; the precipitation of this BCC phase not only produced a "second phase strengthening" effect, which also resulted in "solid solution strengthening", ultimately exhibiting enhanced hardness and strength. These findings have important theoretical reference value for the study of the microstructure and mechanical properties of high-entropy alloys. And, this study plays a significant role in promoting the research and development of new component materials that bear compressive loads, such as columns in large factory buildings, supports for cranes, and clamping bolts for rolling mills in practical mechanical engineering.

Effects of Carbon Nanotubes and Nickel-Plated Carbon Nanotubes on the Microstructure and Mechanical Properties of AlCoCrFeNiCu High Entropy Alloy

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Effect of Aluminium Content on Microstrure and Mechanical Properties of AlxCoFe1.9Ni2.1 High Entropy Alloys

Effects of Nickel on the Microstructure, Mechanical properties and Corrosion Resistance of CoCrFeNixAl0.15Ti0.1 High Entropy Alloy

Effects of Al Addition on Microstructure and Mechanical Properties of Alxcocrfeni High-Entropy Alloy

Microstructure and corrosion properties of AlxCuFeNiCoCr(x = 0.5, 1.0, 1.5, 2.0) high entropy alloys with Al content

Effects of C Element on Microstructure and Mechanical Behavior of Alcrfemnni High-Entropy Alloy

Effect of Aluminum Content on Microstructure and Mechanical Properties of Al X CoCrFeMo0.5Ni High-Entropy Alloys

Effect of Carbon Nanotubes and High Temperature Extrusion on the Microstructure Evolution of Al-Cu Alloy

Microstructure and Mechanical Properties of New AlCo<sub>x</sub>CrFeMo<sub>0.5</sub>Ni High-Entropy Alloys

The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al0.6CoFeNi2V0.5 High Entropy Alloy

Nano-Structure Evolution and Mechanical Properties of AlxCoCrFeNi2.1 (x = 0, 0.3, 0.7, 1.0, 1.3) High-Entropy Alloy Prepared by Mechanical Alloying and Spark Plasma Sintering

On the Elemental Effect of AlCoCrCuFeNi High-Entropy Alloy System

Effects of Cu addition on the microstructure and mechanical properties of AlFeCrCoTiCu x high-entropy alloys

Microstructure and Mechanical Properties of Ultrafine Grained CoCrFeNi and CoCrFeNiAl0.3 High Entropy Alloys Reinforced with Cr2O3/Al2O3 Nanoparticles

Effect of Aluminum Content on Microstructure and Wear Resistance of CuCrFeMnTiAl_x High-Entropy Alloy

On Microstructure and Mechanical Performance of AlCoCrFeMo0.5Nix High-Entropy Alloys

Effect of Al Elements on the Microstructure and Properties of CoCrNiCuMoAlx High-Entropy Alloys

Effect of Ti Content on the Microstructure and Properties of CoCrFeNiMnTix High Entropy Alloy

Wear and oxidation resistances of AlCrFeNiTi-based high entropy alloys

Effects of Cu on the High-Entropy Alloys of CuxCoCrFeNi: Experiment and Molecular Dynamics Simulations