Abstract:Rail grinding with abrasive belt essentially appears as the complex nonlinear contact interaction between contact wheel, abrasive belt, and rail surface to realize flexible and efficient rail grinding, and in the grinding process, the higher grinding efficiency can be achieved with a serrated contact wheel. However, the contact mechanism between serrated contact wheel and rail is obscure. In this paper, a parametric contact model between serrated contact wheel and rail is established by setting the non-structural (grinding pressure and rotation angle) and structural parameters (helix angle, cogging ratio, etc.) of the serrated contact wheel. Then, the finite element simulation of contact behaviors under the changing conditions of various parameters is carried out to reveal the influences of the above parameters on the maximum contact stress, contact area, and rubber layer indentation depth. On this basis of the extension of the traditional Hertz contact theory and the calculation of the geometric structures of serrated contact wheel and rail, the mathematical model of the contact area is obtained and the ellipsoidal pressure distribution area and the stress concentration area are calculated and combined together to obtain the contact area pressure distribution model. The contact static test platform was designed and the errors between the theoretical and experimental lengths of the long and short axes of the contact area under a rotation angle of 0° were respectively determined as 7.3 % and 9.9 %, thus verifying the correctness of the established mathematical model. In addition, the theoretical and experimental results of the same points on the characteristic lines of the pressure distribution were obtained separately for the comparison. The comparison results proved the correctness of the mathematical model of pressure distribution.

Research on control strategy of abrasive belt type rail grinding for corrugation repair process

Modeling the development of rail corrugation to schedule a more economical rail grinding

An Automated System for Position Monitoring and Correction of Chord-Based Rail Corrugation Measuring Points

Investigation on rail corrugation grinding criterion based on coupled vehicle–track dynamics and rolling contact fatigue model

An assessment method of rail corrugation based on wheel–rail vertical force and its application for rail grinding

Analysis of rail corrugation characteristics based on PSD

Study on the effect of mitigation strategies for rail corrugation in metro lines

Analysis of rail corrugation deterioration behavior on a heavy-haul railway

Research on the relationship between the rail corrugation and the vibration response of the wheel-rail system

Study on the Formation Mechanism for High Rail Corrugation

Research Review on Rail Corrugation

Static contact mechanism between serrated contact wheel and rail in rail grinding with abrasive belt

Effects of Abrasive Material and Hardness of Grinding Wheel on Rail Grinding Behaviors

Experimental Investigation on the Wear and Damage Behaviors of Machined Wheel-Rail Materials under Dry Sliding Conditions

A rail corrugation evaluation method using fractal characterization based on structure function method

Study on the Origin of Rail Corrugation at a Long Downhill Braking Section Based on Friction-Excited Oscillation

Study on the phenomenon of rail corrugation on high-speed rail based on the friction-induced vibration and feedback vibration

Design Method of Rail Grinding Target Profile Based on Non-Uniform Rational B-spline

Evaluating the impact of rail surface roughness post-grinding: An experimental and elastoplastic modelling approach

Study on the Mechanism of the Abnormal Phenomenon of Rail Corrugation in the Curve Interval of a Mountain City Metro

Dynamic diagnosis method and quantitative characterization of rail corrugation