Abstract:Rail corrugation should be managed appropriately, as it causes noise, vibration, and degradation of track components and materials. Generally, rail corrugation is managed with the removal of rail surface roughness by rail grinding. However, in many cases, rail corrugation will reoccur after the rail is ground, thereby making the management of the phenomenon difficult for railway operators. For the proper management of rail corrugation, it is necessary to understand the development of rail corrugation and model it mathematically. However, this effort has not been made in previous studies. This paper investigates an efficient method for scheduling a regular grinding maintenance to manage rail corrugation. Using regularly measured data about rail surface roughness on a commercial line, a mathematical model was developed to estimate the growth of rail corrugation. This model was utilized to estimate the effects of the remaining roughness after rail grinding on the maintenance cost and to optimize the maintenance schedule. First, it was confirmed that the development of rail surface roughness of rail corrugation can be expressed in three phases and can be modeled by fitting the functions of growth curves to measurements of rail surface roughness recorded over a long period. Next, the rail grinding strategy was examined by applying this model to realize both effective and economical strategies for the maintenance of rail corrugation. This study confirmed that maintenance costs can be reduced by rail grinding that removes almost all of rail corrugation. In the case of ballasted tracks, it has been found that the optimal grinding schedule can reduce the cost of rail grinding as well as the cost of tamping. These findings can be applied by railway operators tasked with managing maintenance schedules for railway lines at a minimum cost.

Evaluating the impact of rail surface roughness post-grinding: An experimental and elastoplastic modelling approach

Rail surface damage management through monitoring and modelling

Rough surface rolling contact fatigue crack stress intensity factor calculation for modern rail steels

Experimental Investigation on the Wear and Damage Behaviors of Machined Wheel-Rail Materials under Dry Sliding Conditions

Modeling the development of rail corrugation to schedule a more economical rail grinding

Study on Dynamic Responses of Unit Slab Track Considering the Influence of Cement Asphalt Mortar Rough Surface

Fatigue crack growth in wheel-rail rolling-sliding contact: A perspective of elastic-plastic fracture mechanics criterion

Effect of gauge corner lubrication on wheel/rail non-Hertzian contact and rail surface damage on the curves

Theoretical Investigations of Wheel/Rail Non-linear Interaction due to Roughness Excitation

Influence of material properties on the high-speed wheel-rail rolling contact behaviour

Influence of Grinding Pressure on Removal Behaviours of Rail Material

Study on the effect of mitigation strategies for rail corrugation in metro lines

New Tribological Aspects in the Micro-Areas of the Symmetric Rolling-Sliding Contact

In situ evaluation of contact stiffness in a slip interface with different roughness conditions using ultrasound reflectometry

A new direct approach for evaluating the wheel-rail contact stiffness, including surface roughness and hardening effects

Wear modelling in wheel–rail contact problems based on energy dissipation

On the issue of wearing mechanism of abrasive wheels during rails grinding

Effect of Lubricant on Surface Crack Propagation and Fatigue Life of One-Way Rail in Rail-Wheel Contact

Stratified surface layers affecting crack propagation in wheel-rail contacts

An assessment method of rail corrugation based on wheel–rail vertical force and its application for rail grinding

An elastic-plastic theoretical analysis model of wheel-rail rolling contact behaviour