Abstract:Rare earth (RE) elements have large solid solubility in magnesium and are widely used to regulate the microstructure and property of advanced magnesium alloys. However, different kinds of RE elements have different effects on microstructure and property of the alloy. In this study, a Mg–Zn–Y alloy and a Mg–Zn–Gd alloy with alloying elements of the same atomic percentage were designed to clarify the effect of yttrium (Y) and gadolinium (Gd) on the corrosion behavior of as-cast MgZn 2 Y 2.66 and MgZn 2 Gd 2.66 alloys. The results show that the MgZn 2 Y 2.66 alloy is mainly composed of α-Mg phase and long period stacking ordered (LPSO) phase, while MgZn 2 Gd 2.66 alloy is mainly composed of α-Mg phase and (Mg, Gd) 3 Zn phase (W phase). Generally speaking, the corrosion phenomena of the two alloys in 3.5 wt% NaCl solution are similar. In the early stages of exposure, the alloys underwent uniform corrosion at a relatively low corrosion rate. With prolonged exposure, localized corrosion became dominated and the corrosion rate was greatly increased. However, the corrosion rate of the MgZn 2 Y 2.66 alloy, in terms of the corrosion current density, is about one order of magnitude lower than that of the MgZn 2 Gd 2.66 alloy. The high corrosion resistance of the MgZn 2 Y 2.66 alloy is mainly attributed to the presence of LPSO phase in form of continuous networks and the relatively high corrosion resistance of the corrosion product layer on the alloy.

High-temperature oxidation behavior and corrosion behavior of high strength Mg-xGd alloys with high Gd content

The high-temperature oxidation resistance properties of magnesium alloys alloyed with Gd and Ca

Early high temperature oxidation behaviors of Mg–10Gd–3Y alloys

Improving the corrosion resistance of MgZn1.2Gd Zr0.18 (x = 0, 0.8, 1.4, 2.0) alloys via Gd additions

Effect of Gd Content on Microstructure and Mechanical Properties of Mg-xGd-Zr Alloys Via Semicontinuous Casting

Effect of Gd content on high temperature mechanical properties of Mg–Gd–Y–Zr alloy

Microstructure, Mechanical Properties, and Corrosion Behavior of Degradable Mg-Al-Cu-Zn-Gd Alloys

Characterization and Properties of Mg-xGd-1.5Nd-0.5Zn-0.5Zr Alloys for Biodegradation Applications.

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Microstructures and Mechanical Properties of the Mg–4.5Zn–xGd (x = 0, 2, 3 and 5) Alloys

Effect of Gd on Microstructure, Mechanical Properties, and Corrosion Behavior of As-Homogenized Mg−8Li−3Al−2Zn−0.2Zr Alloy

Mechanical and Corrosion Properties of Mg-Based Alloys with Gd Addition

Investigation of the Corrosion for Mg–xGd–3Y–0.4Zr (x = 6, 8, 10, 12 Wt%) Alloys in a Peak-Aged Condition

Influences of Gd on the Microstructure and Strength of Mg–4.5Zn Alloy

Effect of Gd Content on Microstructure and Mechanical Properties of Mg–Gd–Y–Zr Alloys under Peak-Aged Condition

Improving tensile properties and corrosion resistance of Mg–Zn–Ca–Mn alloy via Gd addition

Effect of Gd on Microstructure and Corrosion Resistance of As-Cast Mg97Zn1Y2 Alloy

Revealing the effect of Gd alloying on oxidation resistance and oxide film protection performance of AZ80 alloy

Comparative Study on Corrosion Behavior and Mechanism of As-Cast Mg–Zn–Y and Mg–Zn–Gd Alloys

The Oxidation Behavior and Reaction Thermodynamics and Kinetics of the Mg-X (X = Ca/Gd/Y) Binary Alloys

Comprehensive Unveiling of the Oxidation Resistance and Corrosion Protection of an Oxide Layer Formed on the Gd-Alloyed AZ80 Alloy Surface