Abstract:The intrinsic properties of PEDOT: PSS are regulated by adding molybdenum‐containing semiconductors (MoO3 and MoS2). The MoO3‐PEDOT: PSS and MoS2‐PEDOT: PSS solutions exhibit lower acidity, while their thin films show improved conductivity and enhanced electron‐blocking ability. With the modified PEDOT: PSS layer, organic solar cells composed of PM6:Y6 and PM6:L8‐BO achieve champion power conversion efficiencies of 18.0% and 18.9%, respectively. Anode interlayers play critical roles in organic solar cells, impacting the electrode's work function, energy level alignment, hole extraction, and electrode surfaces. However, the development of the commonly used anode interlayer PEDOT:PSS lags behind the rapid development of organic solar cells due to its low conductivity, acidity, and poor electron‐blocking capabilities. Herein, an innovative strategy is proposed to regulate the intrinsic properties of PEDOT:PSS by incorporating molybdenum‐containing semiconductors (MoO3, MoS2), which is validated using the state‐of‐the‐art active layer consisting of PM6:Y6 in conventional devices. The addition of molybdenum‐containing semiconductors alters the aggregation morphology of the PEDOT:PSS layer, increasing its conductivity and reducing its acidity. Furthermore, the hole extraction and electron‐blocking ability are improved by changing the work function of the anode with the influence of the deep energy level and by forming a trap energy level to capture electrons. Consequently, when the interlayer is employed, a champion power conversion efficiency of 17.1% in the PM6:Y6 devices and 18.9% in organic solar cells composed of PM6:L8‐BO is achieved. The results, which enhance the intrinsic properties of PEDOT:PSS with molybdenum‐containing semiconductors, offer valuable guidelines for engineering anode interlayers to fabricate highly efficient non‐fullerene organic solar cells.

The role of selectively oxidized graphene and MoS 2 in enhancing efficiency of spray-coated bulk heterojunction photoactive layers

Few-layer MoS2 flakes as hole-selective layer for solution-processed hybrid organic hydrogen-evolving photocathodes

Efficiency improvement of molybdenum oxide doped with graphene oxide thin films solar cells processed by spray pyrolysis technique

Reporting Performance in MoS2–TiO2 Bilayer and Heterojunction Films Based Dye-Sensitized Photovoltaic Devices

Enhanced Photovoltaic Performances of Graphene/Si Solar Cells by Insertion of an MoS2 Thin Film

MOF-derived (MoS2, gamma-Fe2O3)/graphene Z-scheme photocatalysts with excellent activity for oxygen evolution under visible light irradiation

The Influence of MoS2 Thickness on the Efficiency of Solar Energy Conversion in TiO2/MoS2/P3HT Cells

Spray-Coated Transition Metal Dichalcogenides as Hole Transport Layers in Inverted NFA-Based Organic Photovoltaics with Enhanced Stability under Solar and Artificial Light

MoS2/SnO2 Heterojunction Composite: One-step Synthesis and Its Enhanced Visible-Light Response

18.9% Efficiency Binary Organic Solar Cells Enabled by Regulating the Intrinsic Properties of PEDOT:PSS

Fullerene-Structured MoSe2 Hollow Spheres Anchored on Highly Nitrogen-Doped Graphene As a Conductive Catalyst for Photovoltaic Applications

Metal-Organic-Compound-Modified MoS2 with Enhanced Solubility for High-Performance Perovskite Solar Cells

Solution-processed Graphene-MoS2 Heterostructure for Efficient Hole Extraction in Organic Solar Cells

Enhanced Charge Carrier Transport in Spray-Cast Organic Solar Cells Using Solution Processed MoO3 Micro Arrays

Modulating Charge Transfer Pathways to Enhance Photocatalytic Performance of the Metal-Organic Layer Nanosheet

Boosting Photovoltaic Performance in Organic Solar Cells by Manipulating the Size of MoS2 Quantum Dots as a Hole-Transport Material

Single-layer MoS2 as efficient photocatalyst

Mediation of Interfacial Mo2C Bridging Effect in MoS2@Carbon Colloid Dots Featuring Improved Photovoltaic Performances of Si‐Based Hybrid Solar Cells (Adv. Mater. Technol. 12/2024)

Solution-Processed MoO3:PEDOT:PSS Hybrid Hole Transporting Layer for Inverted Polymer Solar Cells

Molybdenum Oxide Particles Doped in Hole Transport Layer to Enhance the Efficiency of Flexible Polymer Solar Cells

Improved Functionality of Poly(3,4-Ethylenedioxythiophene):Poly(Styrenesulfonate)/HeptaCoordinated Organotin Complex Films via Graphene Applied to Organic Solar Cell Fabrications