Abstract:The intrinsic properties of PEDOT: PSS are regulated by adding molybdenum‐containing semiconductors (MoO3 and MoS2). The MoO3‐PEDOT: PSS and MoS2‐PEDOT: PSS solutions exhibit lower acidity, while their thin films show improved conductivity and enhanced electron‐blocking ability. With the modified PEDOT: PSS layer, organic solar cells composed of PM6:Y6 and PM6:L8‐BO achieve champion power conversion efficiencies of 18.0% and 18.9%, respectively. Anode interlayers play critical roles in organic solar cells, impacting the electrode's work function, energy level alignment, hole extraction, and electrode surfaces. However, the development of the commonly used anode interlayer PEDOT:PSS lags behind the rapid development of organic solar cells due to its low conductivity, acidity, and poor electron‐blocking capabilities. Herein, an innovative strategy is proposed to regulate the intrinsic properties of PEDOT:PSS by incorporating molybdenum‐containing semiconductors (MoO3, MoS2), which is validated using the state‐of‐the‐art active layer consisting of PM6:Y6 in conventional devices. The addition of molybdenum‐containing semiconductors alters the aggregation morphology of the PEDOT:PSS layer, increasing its conductivity and reducing its acidity. Furthermore, the hole extraction and electron‐blocking ability are improved by changing the work function of the anode with the influence of the deep energy level and by forming a trap energy level to capture electrons. Consequently, when the interlayer is employed, a champion power conversion efficiency of 17.1% in the PM6:Y6 devices and 18.9% in organic solar cells composed of PM6:L8‐BO is achieved. The results, which enhance the intrinsic properties of PEDOT:PSS with molybdenum‐containing semiconductors, offer valuable guidelines for engineering anode interlayers to fabricate highly efficient non‐fullerene organic solar cells.

Metal-Organic-Compound-Modified MoS2 with Enhanced Solubility for High-Performance Perovskite Solar Cells

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Molybdenum-Oxide-Modified PEDOT:PSS as Efficient Hole Transport Layer in Perovskite Solar Cells

Mesoporous structured MoS2 as an electron transport layer for efficient and stable perovskite solar cells

18.9% Efficiency Binary Organic Solar Cells Enabled by Regulating the Intrinsic Properties of PEDOT:PSS

Mesoporous structured MoS 2 as an electron transport layer for efficient and stable perovskite solar cells

Physically and Chemically Stable Molybdenum-Based Composite Electrodes for P-I-n Perovskite Solar Cells

Solution-processed Graphene-MoS2 Heterostructure for Efficient Hole Extraction in Organic Solar Cells

Pure 2H Phase MoSe2 Nanosheets Promote Formation of Porous PbI2 Film and Modulate Residual Stress for Highly Efficient and Stable Perovskite Solar Cells

Heterogeneous Nucleation and Enhanced Charge Transfer via Amorphous Metal‐Organic Frameworks for Efficient and Stable Perovskite Solar Cells

Organic Bromide Salts Interface Modification for High-Efficiency Perovskite Solar Cells with Printed Carbon Electrode

Efficient and Stable Planar Heterojunction Perovskite Solar Cells with an MoO3/PEDOT:PSS Hole Transporting Layer.

Colloidal PbSe Solar Cells with Molybdenum Oxide Modified Graphene Anodes.

Few-layer MoS2 flakes as hole-selective layer for solution-processed hybrid organic hydrogen-evolving photocathodes

Solution-Processed Mosx Thin-Films As Hole-Transport Layers for Efficient Polymer Solar Cells

Enhancing the Efficiency of Perovskite Solar Cells through Interface Engineering with MoS2 Quantum Dots

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

Metal-Organic Framework Materials in Perovskite Solar Cells: Recent Advancements and Perspectives.

Reporting Performance in MoS2–TiO2 Bilayer and Heterojunction Films Based Dye-Sensitized Photovoltaic Devices

Ultra-stable two-dimensional MoS2 solution for highly efficient organic solar cells