Abstract:The direct instantaneous torque control (DITC) method is an effective way to suppress the torque ripple of doubly salient motor (DSM). However, there is the inevitable phase current peak in the conventional DITC method, which increases the current stress of the power switches and degrades the torque capability of the DSM. In this paper, an improved DITC method is proposed based on the optimal torque sharing ratio. Firstly, the maximum torque characteristics of two-segment twisted-rotor DSM are obtained through the finite element method. The optimal torque sharing ratio and the ideal phase current waveform are deduced based on the maximum torque characteristics of two parts of two-segment twisted-rotor DSM, which have 180° electrical angle difference. Then, by sharing the total reference torque to two parts according to optimal torque sharing ratio, the operation principle of the proposed DITC method is derived. Finally, the proposed DITC method is implemented on the 12/8-pole two-segment twisted-rotor DSM drive system. The performance of the proposed DITC method under different commutation angle parameters, different speeds, and reference speed step change are demonstrated through experimental results. The experimental results indicate that the proposed DITC method can suppress the peak current and enhance the torque capability of two-segment twisted-rotor DSM while guaranteeing low torque ripple operation.

An Improved Direct Instantaneous Torque Control of Doubly Salient Electromagnetic Machine for Torque Ripple Reduction

Optimized Direct Instantaneous Torque Control for SRMs With Efficiency Improvement

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Multi-level Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Torque ripple minimization for switched reluctance motors by online modification of torque sharing function

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

An Improved Direct Instantaneous Torque Control of Two-Segment Twisted-Rotor Doubly Salient Motor for Torque Capability Enhancement

Torque Ripple Reduction Strategy for Doubly Salient Electromagnetic Machine Based on Current Given Function

Research on Direct Torque Control of Induction Machine Based on Torque Prediction

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

A Novel Direct Torque Control Method with the Compensation of Rotating EMF to Reduce Torque Ripple for Permanent Magnet Synchronous Motor Drives

Improved Stator/Rotor-Pole Number Combinations for Torque Ripple Reduction in Doubly Salient PM Machines

An Improved Directtorque Control Technology Study for Permanent Magnet Synchronous Motor

Optimum Design of Switched Reluctance Motor Based on Direct Instantaneous Torque Control

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

Attenuation Of Pmsm Torque-Ripple Based On Combination Of Equivalent-Input-Disturbance Approach And Sliding-Mode Control

Electromagnetic Characteristics Analysis and Torque Ripple Reduction for Doubly Salient PM Machine

Online Adaptive Maximum Torque Per Ampere Control for Doubly Salient Electromagnetic Machine

Improved Direct Torque Control of Induction Motor for Torque Ripple Minimization