Abstract:Li-ion batteries (LIBs) have succeeded in powering small portable electric devices and are currently expanding to large scale applications (i. e. electric vehicles and grid-level energy storage systems) but it is debatable whether the lithium reserve can meet the increasing demands on the emerging large scale applications. Thus, K-ion batteries (KIBs) and Na-ion batteries (NIBs) are considered alternative energy storage systems due to the natural abundance of K and Na reserve. KIB technology is particularly interesting because K has a lower standard redox potential than Na in non-aqueous carbonate-based electrolytes that are commonly used for NIBs.1-3 It indicates that KIBs can potentially have a higher cell voltage than NIBs when the cathode materials provide the same working voltage as their analogues in Na system. More importantly, graphite, which is a standard anode for LIBs, cannot reversibly intercalate Na ions, thus NIBs require expensive hard carbon anodes. On the other hand, graphite can store and release K ions reversibly, which in fact sparks research interest in KIBs.3,4 The discovery of novel positive electrodes is a critical step toward realizing KIBs. In this work, we develop new cathode materials with layered-structure (i. e. KxTMO2, TM = Co and Mn)5, 6 for KIBs and investigate K-storage properties and mechanism in them by in-situ diffraction and electrochemical characterization combined with theoretical first-principles calculations. Here, we also found that the alkali ion species significantly affect electrochemical properties in layered transition metal oxides. When the size of alkali ion increases (Li+ < Na+ < K+), the voltage curves become more sloped. This is because the formation energy of layered compounds changes more significantly according to K concentrations in K x TMO2 due to the stronger interaction between K+-K+ than Na and Li systems. It can deteriorate the specific capacity and operating voltage, and thus energy density. Therefore, it is important to design novel electrode materials that can minimize the interaction between K ions. This presentation will also provide a good guideline how to design electrode materials for KIBs. References Eftekhari, A. et al. Potassium Secondary Batteries. ACS Appl. Mater. Sci., 9, 4404. (2016). Marcus, Y. Thermodynamic functions of transfer of single ions from water to non-aqueous and mixed solvents: Part 3 - Standard potentials of selected electrodes. Pure and Applied Chemistry 57, 1129. (1985). Komaba, S. et al. Potassium intercalation into graphite to realize high-voltage/high-power potassium-ion batteries and potassium-ion capacitors. Electrochem. Commun. 60, 172. (2015). Jian, Z., et al. Carbon Electrodes for K-Ion Batteries. J. Am. Chem. Soc. 137, 11566. (2015). Kim, H. et al. K-Ion Batteries Based on a P2-Type K0.6CoO2 Cathode. Adv. Energy Mater. 7, 1700098. (2017) Kim, H. et al. Investigation of potassium storage in layered P3-type K0.5MnO2 cathode. Adv. Mater. 29, 1702480 (2017)

Chimie Douce Derived K-Based P2-Type Transition Metal(s) Layered Oxides for Secondary K-Ion Batteries

Design of New Cathode Materials for K-Ion Batteries

Evaluation of P3-type layered oxides as K-ion battery cathodes

K‐Ion Batteries Based on a P2‐Type K0.6CoO2 Cathode

Chimie Douce Derived Novel P2‐Type Layered Oxide for Potassium‐Ion Batteries (Adv. Funct. Mater. 41/2024)

Self-Templated Formation of P2-type K0.6CoO2 Microspheres for High Reversible Potassium-Ion Batteries.

A 3.2 V Binary Layered Oxide Cathode for Potassium‐Ion Batteries

Balancing the Redox Activity Against Structure Stability in High-Voltage Manganese/iron-Based Layered Oxide Cathodes Through Copper Doping for Potassium-Ion Batteries

(Battery Division Postdoctoral Associate Research Award Address, Sponsored by MTI Corporation and the Jiang Family Foundation) K-Ion Battery for a Next-Generation Energy Storage System

Mn-based Layered Oxide Microspheres Assembled by Ultrathin Nanosheets As Cathode Material for Potassium-Ion Batteries

Design of Stoichiometric Layered Potassium Transition Metal Oxide for K-Ion Batteries

Anion Doping for Layered Oxides with a Solid-Solution Reaction for Potassium-Ion Battery Cathodes

Designing a Durable High-Rate K0.45Ni0.1Fe0.1Mn0.8O2 Cathode for K-ion Batteries: A Joint Study of Theory and Experiment

Layered K0.54Mn0.78Mg0.22O2 as a high-performance cathode material for potassium-ion batteries

A P3-Type K 1/2 Mn 5/6 Mg 1/12 Ni 1/12 O 2 Cathode Material for Potassium-Ion Batteries with High Structural Reversibility Secured by the Mg–Ni Pinning Effect

Surface Lattice Modulation Stabilizes K2Mn[Fe(CN)6] Cathode for High‐Energy K‐Ion Batteries

Layered P2-Type K0.65Fe0.5Mn0.5O2 Microspheres As Superior Cathode for High-Energy Potassium-Ion Batteries

A P2/P3 Biphasic Layered Oxide Composite as a High‐Energy and Long‐Cycle‐Life Cathode for Potassium‐Ion Batteries

Layered K0.37MnO2·0.25H2O as cathode material for potassium ion batteries

Suppressing the interlayer-gliding of layered P3-type K 0.5 Mn 0.7 Co 0.2 Fe 0.1 O 2 cathode materials on electrochemical potassium-ion storage

Stoichiometric Layered Potassium Transition Metal Oxide for Rechargeable Potassium Batteries