A P3-Type K 1/2 Mn 5/6 Mg 1/12 Ni 1/12 O 2 Cathode Material for Potassium-Ion Batteries with High Structural Reversibility Secured by the Mg–Ni Pinning Effect
Liying Liu,Jinji Liang,Wanlin Wang,Chao Han,Qingbing Xia,Xi Ke,Jun Liu,Qinfen Gu,Zhicong Shi,Shulei Chou,Shixue Dou,Weijie Li
DOI: https://doi.org/10.1021/acsami.1c07220
2021-06-09
Abstract:Mn-based layered oxides are very attractive as cathodes for potassium-ion batteries (PIBs) due to their low-cost and environmentally friendly precursors. Their transfer to practical application, however, is inhibited by some issues including consecutive phase transitions, sluggish K<sup>+</sup> deintercalation/intercalation, and serious capacity loss. Herein, Mg–Ni co-substituted K<sub>1/2</sub>Mn<sub>5/6</sub>Mg<sub>1/12</sub>Ni<sub>1/12</sub>O<sub>2</sub> is designed as a promising cathode material for PIBs, with suppressed phase transitions that occurred in K<sub>1/2</sub>MnO<sub>2</sub> and improved K<sup>+</sup> storage performance. Part of Mg<sup>2+</sup> and Ni<sup>2+</sup> occupies the K<sup>+</sup> layer, playing the role of a "nailed pillar", which restrains metal oxide layer gliding during the K<sup>+</sup> (de)intercalation. The "Mg–Ni pinning effect" not only suppresses the phase transitions but also reduces the cell volume variation, leading to the improved cycle performance. Moreover, K<sub>1/2</sub>Mn<sub>5/6</sub>Mg<sub>1/12</sub>Ni<sub>1/12</sub>O<sub>2</sub> has low activation barrier energy for K<sup>+</sup> diffusion and high electron conductivity as demonstrated by first-principles calculations, resulting in better rate capability. In addition, K<sub>1/2</sub>Mn<sub>5/6</sub>Mg<sub>1/12</sub>Ni<sub>1/12</sub>O<sub>2</sub> also delivers a higher reversible capacity owing to the participation of the Ni element in electrochemical reactions and the pseudocapacitive contribution. This study provides a basic understanding of structural evolution in layered Mn-based oxides and broadens the strategic design of cathode materials for PIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c07220?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c07220</a>.<i>In situ</i> high-temperature XRD (HT-XRD) patterns, crystal structure model, XPS spectra, EDS spectra and mappings, element contents tested by ICP, HAADF-STEM image, charge–discharge curves and cycling performances, CV curves at different scan rates, calculated <i>I</i><sub>p</sub>–<i>v</i><sup>0.5</sup> patterns, <i>b</i> (slope) values, <i>E</i> vs <i>t</i> and <i>E</i> vs <i>t</i><sup>1/2</sup> profiles, GITT curves with K<sup>+</sup> diffusion coefficients, and enlarged <i>in situ</i> synchrotron XRD patterns (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c07220/suppl_file/am1c07220_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology