Abstract:The catastrophic effects of atmospheric greenhouse gases and the depletion of non-renewable resources has led to the urgency to develop clean, sustainable energy technologies to meet increasing energy demands. However, the intermittent nature of current renewable energy technologies warrants the acquisition of on-demand renewable energy through either energy production or storage methods. Polymer electrolyte membrane fuel cells (PEMFCs) are promising candidates for this task, as they utilize the most abundant element on Earth, hydrogen, to produce high amounts of power under rapid changes in load with little to no greenhouse gas emissions (1). Therefore, PEMFCs have great potential to help offset the negative impact of atmospheric pollution due to excessive carbon emissions. However, liquid water management issues associated with high power output of the fuel cell typically leads to reduced performance and durability of the fuel cell, and thereby hinders global implementation of these devices (2). To minimize these losses and improve GDL material designs, an understanding of the relationship between product liquid water distributions in the cathode GDL and transport properties of PEMFCs under varying operating conditions is highly valuable. Previous works have characterized the effect of operating temperature on liquid water pathways and distributions in GDLs by visualizing operando PEMFCs with 3D imaging techniques such as X-ray computed tomography (CT) (3). The high-speed, high-resolution capabilities of these imaging techniques enable the visualization of dynamic pore-scale activity to elucidate transport mechanisms in the GDL. In this work, the effect of inlet relative humidity on the formation and distribution of liquid water pathways in cathode GDLs is investigated by imaging a PEMFC operando with synchrotron X-ray CT at high spatial resolution, enabling the resolution of water in the individual pores of the GDL. The contribution of a microporous layer (MPL) is also explored by imaging a cell with an MPL and without. Imaging is conducted on a specialized cell designed to facilitate continuous rotation about the CT stage, enabling fast acquisition of consecutive scans to achieve high temporal resolution useful for visualizing the dynamic development of preferential water pathways. Additionally, electrochemical impedance spectroscopy was performed to quantify mass transport losses. The sequence of CT images was utilized to capture the dynamics of liquid water development as well as stabilized water distributions. Visualizing the reconstructed images shows that as current increases, water production increases, and the development of water pathways to breakthrough at the flow field interface is observed. Additionally, results show that an increase in relative humidity led to a significant increase in cathode GDL water saturation. The contribution of this study to understanding transport mechanisms in GDL materials is significant to the characterization and optimal design of materials for improved PEMFC performance. Ultimately, the goal of this work is to accelerate the worldwide adoption of PEMFCs as a sustainable, reliable solution to replace conventional carbon-emitting energy sources. 1. Alaswad et al. , J. Hydrog. Energy , 41 , (2016) 2. Nagai et al. , J. Power Sources , 435 , (2019) 3. D. Shum et al. , Electrochem. Acta , 256 , (2017)

An Experimental Study on the Correlation between Characteristics of Gas Diffusion Layer and Performance Depending on Relative Humidity Variation in Proton Exchange Membrane Fuel Cell

Structural Design of Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell at Varying Humidification

Optimization of Microporous Layer Composition at Varying Humidities for High-Performance Polymer Exchange Membrane Fuel Cell

Recent Progress of the Gas Diffusion Layer in Proton Exchange Membrane Fuel Cells: Material and Structure Designs of Microporous Layer

A Super Uniform Hydrophobic Gas Diffusion Layer for a Proton Exchange Membrane Fuel Cell

Effects of Membrane Electrode Assembly Properties on Two-Phase Transport and Performance in Proton Exchange Membrane Electrolyzer Cells

Control Mechanism of a Modified Buffer Layer on Interfacial Mass Transfer Efficiency for a Proton Exchange Membrane Fuel Cell at Varying Humidity

Study on preparation process and durability of gas diffusion layer of proton exchange membrane fuel cell

Effect of the Gas Diffusion Layer Design on the Water Management and Cell Performance of a PEM Fuel Cell

Effect of Micro-Porous Layer on PEM Fuel Cells Performance: Considering the Spatially Variable Properties

Effects of Cathode Gas Diffusion Layer Porosity and Contact Angle Distributions along Through-Plane Direction on the Performance of Polymer Electrolyte Membrane Fuel Cell

Hydrophobicity enhancement of gas diffusion layer induced by hydrothermal deposition process and the electrochemical performance of proton exchange membrane fuel cell

Gas Diffusion Layer: The Critical Player in Gases Distribution in the Proton Exchange Membrane Fuel Cell

Liquid Water Transport and Mechanical Performance of Electrospun Gas Diffusion Layers

Study on Diffusion Characteristics of Liquid Water in Gas Diffusion Lattice Boltzmann Method

Influence and Optimization of Gas Diffusion Layer Porosity Distribution along the Flow Direction on the Performance of Proton Exchange Membrane Fuel Cells

Enhanced low-humidity performance in a proton exchange membrane fuel cell by developing a novel hydrophilic gas diffusion layer

Investigating the Influence of Inlet Relative Humidity on Polymer Electrolyte Membrane Fuel Cell Performance by Visualizing 4-D Water Distributions in Gas Diffusion Layers

Recent Progress of Gas Diffusion Layer in Proton Exchange Membrane Fuel Cell: Two-phase Flow and Material Properties

Effects of Gas-Diffusion Layers and Water Management on the Carbon Corrosion of a Catalyst Layer in Proton-Exchange Membrane Fuel Cells

Electrospun gas diffusion layers with reverse gradient pore structures for proton exchange membrane fuel cells under low humidity