Abstract:By focusing on NPPs of Western design (e.g. PWR and BWR), the first author (G. Saji) has established that ‘long cell action’ corrosion plays a pivotal role in practically all unresolved corrosion issues for all types of nuclear power plants as presented in a series of papers already published (1–9). The authors believe that a similar study of NPPs of Russian design, with their unique scientific and technological basis compared to Western plants, are important to illustrate that this mechanism can occur even with different materials, welding technology or operation (e.g. water chemistry control). Among all the differences, it is important to note that PWSCC per se does not seem to be occurring in VVER plants, although no specific reason has yet to be identified. In this paper, a detailed electrochemical assessment is first made on the behavior of ammonia-potassium water chemistry and structural materials at the normal operational temperature in the primary water of VVERs. The chemical and electrochemical characteristics of the ammonia in VVERS were found to be significantly different from those of PWRs which use the hydrogen water chemistry. However, the water chemistry of RBMK is not fundamentally different from that of the Western BWR and therefore the previous studies on SCC of BWRs are generally applicable. On the bases of these studies, various corrosion issues commonly experienced in NPPs of Russian design (VVER and RBMK) are briefly reviewed. They include: (i) pitting corrosion in un-clad VVER-440 RV; (ii) corrosion cracking at the transition welding joints of RV nozzles and piping; (iii) corrosion issues in PGV-440 steam generator collectors; (iv) steam generator tube and collector corrosion; (v) IGSCC in RBMK with austenitic steel piping; (vi) FAC (E-C) in the secondary system of VVERs; and (vii) Anomalous corrosion products sedimentation in the core region in some VVERs. Since the long cell action hypothesis does not seem to contradict the various corrosion activities being experienced in NPPs of Russian design, the first author invites further study on the potential involvement of this mechanism since this hypothesis provides new insight into many of the unresolved corrosion issues. More specifically, the VVERs’ ammonia-potassium water chemistry has theoretically been identified as playing a key role in the prevention of PWSCC, which is one of the most troublesome mechanism of corrosion degradation in many Western PWRs. In view of this significance, the authors proposed an urgent international joint initiative to prove or disprove this mechanism’s existence in nuclear power systems.

The Study of Multiaxial Loading and Damage to the Structure and Materials in the PWR Steam Generator of Nuclear Reactor

Failure Analysis on Unexpected Fracture of the Hydraulic Expansion Mandrel for Tube to Tubesheet Expanding in the Steam Generator of Nuclear Power Plant

A Cumulative Damage Model for Tubes in Nuclear Power Plants Subject to Continuous Degradation and Multi-Effect Shocks under Dynamic Environments

Creep-fatigue Endurance of a Superheater Tube Plate under Non-Isothermal Loading and Multi-Dwell Condition

Study on the Influence of Power Reduction Process on the Leakage Rate of Steam Generator

Thermo-mechanical Stress Analysis of Feed-Water Valves in Nuclear Power Plants

Research Trends on Micro and Nano-Scale Materials Degradation in Nuclear Power Plant

Fundamental Mechanisms of Component Degradation by Corrosion in Nuclear Power Plants of Russian Design

The Research of Steam Generator Thermal Performance Degradation in Nuclear Power Plant

Failure analysis and prevention of corrosion occurring during storage on steam generator tube sheet for advanced PWR, Part II: Corrosion prevention design

Probabilistic Structural Integrity Assessment For Inconel690 Alloy Steam Generator Tube With Volume Defect

Evaluating direct vessel injection accident-event progression of AP1000 and key figures of merit to support the design and development of water-cooled small modular reactors

Corrosion Fatigue Mechanism of Nuclear-Grade Low Alloy Steel in High Temperature Pressurized Water and Its Environmental Fatigue Design Model

Progress in Studying the Fretting Wear/corrosion of Nuclear Steam Generator Tubes

Understanding Stress Corrosion Cracking (SCC), Affecting Variables and Prevention Strategies in Nuclear Power Plants—A Review

On the role of intergranular nanocavities in long-term stress corrosion cracking of Alloy 690

Research Progress of Steels for Nuclear Reactor Pressure Vessels

Thermal Aging Effect Of Cdss On The Integrity Of The Pwr Primary Pipe With Damage Tolerance Method

Failure analysis and prevention of corrosion occurring during storage on steam generator tube sheet for advanced PWR, Part I: Root causes analysis

Loading Condition Evaluation for Structural Integrity Assessment of RPV Due to PTS Event Based on Three-Dimensional Thermal-Hydraulics and Structural Analyses

Structural Integrity Investigation for RPV with Various Cooling Water Levels under Pressurized Melting Pool