Abstract:Improvement on oxygen (O2) concentrator using pressure swing adsorption (PSA) technology according to variable product demands is of great significance, which, for instance, provides the key step for success in practical O2 therapy for COVID-19 patients who need to be delivered with a wide flow range (1 – 15 standard liter per minute (SLPM)) of medical O2 (purity >82%). This work studied the individual effects of major PSA process parameters on O2 production performance at the product flow rate of 3.46 – 19.88 SLPM (0.64 – 3.68 SLPM per kilogram of adsorbent (SLPM/kg)), based on a self-designed two-bed PSA unit with a modified Skarstom cycle using Li-LSX zeolite adsorbents. The improvement strategies were accordingly proposed based upon influential mechanisms of each parameter: 1) at lower product flow rates (≤2.00 SLPM/kg), increasing the purge flow rate and decreasing the adsorption pressure to suppress excess O2 adsorption, and decreasing the feed flow rate to ensure low energy consumption; 2) at higher product flow rates (≥2.00 SLPM/kg), decreasing the purge flow rate and increasing the adsorption pressure to eliminate N2 breakthrough and O2-rich product waste, and appropriately increasing the feed flow rate to enhance cost-effectiveness. An improved set of parameters (at 3.46 – 19.88 SLPM) rendered O2 purity (95.67 – 74.86%), recovery (11.28 – 49.05%), productivity (0.47 – 2.04 mmol/kg/s) increased by up to 3.52 – 20.08%, 0.36 – 20.47%, 6.82 – 19.61%, and energy consumption (4.07 – 0.95 kWh/kgO2) decreased by up to 10.56 – 18.10%, respectively, in comparison to two conventional sets. The results are beneficial for realizing intellectualized and flexibly-controlled O2 concentrators for practical applications.

Research on Air Filter Monitoring System of Oxygen Generator

Application of Molecular Sieve Oxygen Generation Mini-plant under Harsh Environment

The Production of Industrial-Grade Oxygen from Air by Pressure Swing Adsorption

Continuous air purification by aqueous interface filtration and absorption

Review of Sensors for Detecting Insulating Gas Ozone

Exploring the long-term performance of air purifiers in removing particulate matter and formaldehyde across different residential environments

Rational designed ZIF-8@PDA@PDMS composite sponge for efficient and sustainable particulate matter filtering under harsh environment

Experimental study on oxygen concentrator with wide product flow rate range: individual parametric effect and process improvement strategy

Experimental Study of the Factors Influencing the Regeneration Performance of Reduced Graphite Oxide Filter Materials under Water Cleaning

Self-supporting smart air filters based on PZT/PVDF electrospun nanofiber composite membrane

A self-priming air filtration system based on triboelectric nanogenerator for active air purification

Insights into adsorption separation of N2/O2 mixture on FAU zeolites under plateau special conditions: A molecular simulation study

Preparation of Nanofibrous Metal-Organic Framework Filters for Efficient Air Pollution Control

Low-Cost Sensor System for Air Purification Process Evaluation

Evaluation of oxygen separation from air by pressure/vacuum swing adsorption

Electrospinning and Partial Etching Behaviors of Core-Shell Nanofibers Directly Electrospun on Mesh Substrates for Application in a Cover-Free Compact Air Filter

Textiles/Metal-Organic Frameworks Composites as Flexible Air Filters for Efficient Particulate Matter Removal

Oxidative adsorption mechanism-based screening of zeolites for deep purification and recycling of NOx from humid gases

Experimental Study on Resistance Influencing Factors of Clean Filter Material Used in Air Purification

Multifunctional metal organic framework and carbon nanotube-modified filter for combined ultrafine dust capture and SO2 dynamic adsorption

High-Temperature Particulate Matter Filtration with Resilient Yttria-Stabilized ZrO2 Nanofiber Sponge.