Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Damage Model of Carbon-Fiber-Reinforced Concrete Based on Energy Conversion Principle

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Stress–Strain Behavior of FRC in Uniaxial Tension Based on Mesoscopic Damage Model

Experiment and mesoscopic modelling on the dynamic compressive behaviors of a new carbon fiber-reinforced cement-based composite

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Complete Constitutive Model of CFRP Including Continuous Damage in Low Strain Rate Compression and Temperature Generation in High Strain Rate Impact

A Pull-out Equivalent Telescopic Layered Failure Model of Carbon Fiber Bundles in Seawater Sea-Sand Cementitious Matrix

Fatigue-Cumulative Damage Model Of Rc Crane Girders Strengthened With Frp Strips

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Statistical Damage Constitutive Model for High-Strength Concrete Based on Dissipation Energy Density

A Dynamic Constitutive Model and Simulation of Braided CFRP under High-Speed Tensile Loading

An Experimental and Analytical Study on a Damage Constitutive Model of Engineered Cementitious Composites under Uniaxial Tension

Deformation Damage and Energy Evolution of Basalt Fiber Reinforced Concrete under the Triaxial Compression

A fracture energy–based viscoelastic–viscoplastic–anisotropic damage model for rate-dependent cracking of concrete

Damage evolution model and failure mechanism of continuous carbon fiber-reinforced thermoplastic resin matrix composite materials

Modified plastic damage model for steel fiber reinforced concrete

Experimental and numerical study on multi-impact performance of pre-damaged beams strengthened with CFRP

Study on multi-scale damage and failure mechanism of steel fiber reinforced concrete: Experimental and numerical analysis

Flexural Fatigue Damage Model Of Ultra-High Toughness Cementitious Composites On Base Of Continuum Damage Mechanics