Abstract:Publication date: 19 December 2022 Source: Solid State Phenomena Vol. 339 Author(s): Nadirah Arifin, Zaida Rahayu Yet, Mohd Zulkhairi Abdul Rahim This research is about the fabrication and properties study of the alginate bio-composites film for potential use in food sensing applications. A response surface methodology (RSM) was employed to optimize the concentration of sodium alginate (1 to 5% w/v), glycerol (0.4 to 0.8% w/v), and maltodextrin (0.4 to 0.8% w/v) as a function of the tensile strength (TS) and elongation at break (EB) and toughness (T) of the biofilms. The coefficient determination (R2) result obtained for TS against alginate, glycerol and maltodextrin is 81.05%, while for EB and T are 32.07% and 64.70% respectively. It showed that the addition of sodium alginate, glycerol and maltodextrin at different concentrations had significantly affected the TS but no effect on EB and T was observed. The optimization study of the film produces two conditions which are conditions 1 and 2. The optimum conditions parameter for condition 1 is a film with 3.0% alginate concentration, 1.0g/g of glycerol content, and 1.50g/g of maltodextrin content while condition 2 was 1.0% of alginate concentration, 1.0g/g of glycerol content and 0.0g/g maltodextrin content. The values of the TS obtained at the optimized condition were 4.75 MPa and 22.99 MPa which is lower than the predicted value of condition 1 (7.0 MPa) or the maximized TS at condition 2 respectively. The thickness value of edible films in this study had an average of 0.54 mm which was higher than the maximum standard thickness of edible films according to the Japanese Industrial Standard (JIS) which is 0.25 mm. Water Vapour Permeability (WVTR) study indicated that all alginate films in this study had a value higher than the JIS 1975 standard of WVTR for edible films which is at a maximum of 10 g/m2/24 hours. The natural colour from Clitoria Ternatea was successfully immobilized into the alginate-based film and the film become dark purple. Based on the result obtained, prediction equations for responses studied are adequate to describe the experimental data on tensile strength, elongation at break, and toughness. However, further modifications are necessary for improvements in mechanical characteristics in the future.

Synthesis of Biodegradable Film Made from Sodium Alginate Embedded with Magnesium Nanoparticles for Food Packaging Applications

Degradable and Photocatalytic Antibacterial Au-TiO₂/Sodium Alginate Nanocomposite Films for Active Food Packaging.

Chitosan-based films blended with moringa leaves and MgO nanoparticles for application in active food packaging

Development, characterization and functional properties of sodium alginate-based films incorporated with Schisandra chinensis extract-natamycin complex

Hybrid Metal Oxide (Ag-ZnO) Impregnated Biocomposite in the Development of an Eco-Friendly Sustainable Film

Bio-films based on alginate/modified clay through spray drying: Mechanical, rheological, morphological, and transport properties for potential use as active food packaging

Development of Sodium Alginate Bioplastic Reinforced with Dried Orange Juice By-Product for Use in Packaging

Sodium Alginate-Based Green Packaging Films Functionalized by Guava Leaf Extracts and Their Bioactivities

Bioactive Edible Sodium Alginate Films Incorporated with Tannic Acid as Antimicrobial and Antioxidative Food Packaging

Biodegradable film based on sodium alginate/flax seed mucilage modified with norbixin and WO3 nanoparticles: investigation of physicochemical properties and release of active substances

Fabrication and Characterization Studies of Alginate Biocomposite Film for Potential Use in Food Sensing Application

Optical, thermal, mechanical, and antibacterial properties of polyvinyl alcohol/sodium alginate/ZnMn 2 O 4 nanocomposites films for various optical devices and food packaging applications

Use of Alginates as Food Packaging Materials

Facile synthesis and application of aluminum oxide nanoparticle based biodegradable film

Synthesis of Sodium Alginate-Silver Nanocomposites Using Plasma Activated Water and Cold Atmospheric Plasma Treatment

Development of alginate-based edible coatings of optimized UV-barrier properties by response surface methodology for food packaging applications

Development and characterization of a biodegradable film based on guar gum-gelatin@sodium alginate for a sustainable environment

Degradable and Photocatalytic Antibacterial Au-TiO2/Sodium Alginate Nanocomposite Films for Active Food Packaging

Development of multilayer films based on PLA/PBAT and sodium alginate for active packaging

Theoretical and experimental investigation of sodium alginate composite films containing star anise ethanol extract/hydroxypropyl-β-cyclodextrin inclusion complex

Octadecylamine modified gelatin-based biodegradable packaging film with good water repellency and improved moisture service reliability