Abstract:A composite of multi-walled carbon nanotubes incorporated into a benzyl methacrylate-co-ethylene dimethacrylate porous monolith was prepared, characterized and used as solid phase adsorbent and as stationary phase for simultaneous extraction and separation of ten polycyclic aromatic hydrocarbons, followed by nano-liquid chromatography analysis. The extraction and chromatographic parameters were optimized with regard to the extraction efficiency and the quality of chromatographic analytes separation. Under the optimized conditions, all PAHs were separated in 13 min with suitable resolution values (Rs = 1.74-3.98). Addition of a small amount of carbon nanotubes (0.1% with respect to monomers) to the polymerization mixture increased the efficiency for the separation column to over 41,700 plates m-1 for chrysene at flow rate of 0.5 μL min-1. The method showed a wide linear range (1-500 μg L-1 with R2 more than 0.9938), acceptable extraction repeatability (RSDs < 6.4%, n = 3) and reproducibility (RSDs < 12.6%, five parallel-made solid phase extraction cartridges) and satisfactory detection limits (0.02-0.22 μg L-1). Finally, the proposed method was successfully applied to the detection of polycyclic aromatic hydrocarbons in environmental water samples. After a simple extraction procedure with preconcentration factor equal to 100, the average recovery values in ultra-pure, tap and sea water samples were found to be in the range 81.3-95.4% with %RSD less than 6.4. Again, the presence of carbon nanotubes (0.3% relatively to monomers) in native polymer enhanced the extraction performance for the solid phase adsorbent up to 78.4%. The application of the monoliths modified with CNTs in extraction and nano-scale liquid chromatography for analysis of environmental samples offered several advantages; it demonstrated an acceptable precision, low detection limits, good reproducibility, satisfying recoveries and wide dynamic linear ranges.

Sulfonated mesoporous polystyrene-1D multiwall carbon nanotube nanocomposite as potential adsorbent for efficient removal of xylene isomers from aqueous solution

Rapid, Complete Removal Of Organic Pollutants From Water By A Sns2-Modified Porous -Cyclodextrin-Containing Polymer

An Adsorption–Catalysis Pathway toward Sustainable Application of Mesoporous Carbon Nanospheres for Efficient Environmental Remediation

Preparation of Magnetic Spongy Porous Carbon Skeleton Materials for Efficient Removal of BTEX

Adsorption of Xylene Isomers on Ordered Hexagonal Mesoporous FDU-15 Polymer and Carbon Materials

Facile Conversion of Polystyrene Waste into an Efficient Sorbent for Water Purification

Efficient removal of aromatic sulfonates from wastewater by a recyclable polymer: 2-naphthalene sulfonate as a representative pollutant.

Adsorptive Avidity of Prussian blue Polypyrrole Nanocomposite for Elimination of Water Contaminants: a Case study of Malachite Green and Isoniazid

3D-poly(styrene-methyl methacrylate)/divinyl benzene-2D-nanosheet composite networks for organic solvents and crude oil spill cleanup

Carbon nanotube-based benzyl polymethacrylate composite monolith as a solid phase extraction adsorbent and a stationary phase material for simultaneous extraction and analysis of polycyclic aromatic hydrocarbon in water

A polyfunctionalized carbon framework composite for efficient decontamination of Cr(VI) and polycyclic aromatic nitrides from acidic wastewater

Fabrication of carboxylic functionalized poly(methacrylic acid 2-(tert-butylamino)ethyl ester)-coated mesoporous silica nanoparticles and their application for removing ionic dyes from polluted water

Synthesis of porous carbon xerogel adsorbents with tailored hierarchical porosity and morphology for the selective removal of sulfamethoxazole from water

Removal of polystyrene nanoplastics from water by Cu Ni carbon material: The role of adsorption

Polypyrrole Coated Molybdenum Disulfide Composites As Adsorbent for Enhanced Removal of Cr(VI) in Aqueous Solutions by Adsorption Combined with Reduction

Adsorptive behaviors and mechanisms for removing three organic pollutants from aqueous solutions by polyvinyl alcohol/porous carbon composite hydrogels

Energy‐Efficient Separation of Xylene Isomers through Stacked 1‐Aminopyrene Polymer Composite

Super-adsorbent Microspheres Based on a Triallyl Isocyanurate-Maleic Anhydride Copolymer for the Removal of Organic Pollutants from Water

Superhydrophobic Nanoporous Polymers As Efficient Adsorbents for Organic Compounds

Removal of Aromatic Sulfonates from Aqueous Media by Aminated Polymeric Sorbents: Concentration-dependent Selectivity and the Application

Selective Adsorption of Naphthalene in Aqueous Solution on Mesoporous Carbon Functionalized by Task-Specific Ionic Liquid