Abstract:Polystyrene is used widely due to their ease and convenience; however, the life cycle of this kind of plastic is really short due to the single use purpose, therefore, there are a lot of waste released into the environment annually. In this research, single use dishes made from polystyrene waste (PS) were denaturized to have capacity of ion exchanging by sulfonating process with concentrated sulfuric acid as an agent. The results showed that the sulfonated polystyrene waste (SPS) has grey black color, cation exchange capacity of 0.763 eq/L, density 1.089 g/L and no swelling; this means the functional group SO 3 –H + was attached on the polymer matrix which made the polystyrene waste become ion exchange resin. Scanning electron microscopy (SEM) and X-ray energy dispersive spectrometer (EDS) analysis were also studied to prove the existence of SO 3 –H + groups on the polymer chain with the increase in percentage of sulphur element from 0 to 2.24%. With the optimized sulfonating conditions such as 98% H 2 SO 4 acid volume of 10 mL, reaction time of 10 min, temperature of 80 °C and the mass of polystyrene of 5 g, the calcium removal efficiency was 94.5% with the initial calcium concentration of 200 mg/L. The removal efficiency of heavy metal after 30 min was 98.1%, 95.5% and 98.8% for Zn 2+ , Cd 2+ and Cu 2+ , respectively. After regeneration process, the sulfonated polystyrene showed the capacity of reusing for ion exchange. With the goal of waste recycling as useful material, the obtained product can be used to remove hardness and heavy metal from water, which helps to limit the exploitation of natural resources, reduce the amount of waste discharged into the environment. However, the adsorption and desorption kinetics, surface area coverage, model kinetics should be studied more to provide a more comprehensive understanding and the feasible application in the real world.

Sodium Lignosulfonate Modified Polystyrene for the Removal of Phenol from Wastewater

Rapid, Complete Removal Of Organic Pollutants From Water By A Sns2-Modified Porous -Cyclodextrin-Containing Polymer

A low-cost crosslinked polystyrene derived from environmental wastes for adsorption of phenolic compounds from aqueous solution

Facile Conversion of Polystyrene Waste into an Efficient Sorbent for Water Purification

Phenol adsorption properties and microstructural changes of organically modified bentonite

Efficient and rapid removal of typical phenolic compounds from water with biobased porous organic polymers

STUDY ON THE ADSORPTION AND DE-SORPTION OF PHENOL USING HYPERCROSSLINKED POLYMERIC ADSORBENT MODIFIED BY PHENOLIC HYDROXYL GROUP

Cellulose-based thermosensitive supramolecular hydrogel for phenol removal from polluted water

Removal of phenol by lignin-based activated carbon as an efficient adsorbent for adsorption of phenolic wastewater

Synthesis of sodium polystyrene sulfonate resins for the removal of methylene blue from wastewater

A NEW PHENOLIC HYDROXYL MODIFIED POLYSTYRENE ADSORBENT FOR THE REMOVAL OF PHENOLIC COMPOUNDS FROM THEIR AQUEOUS SOLUTIONS

Design, Preparation, and Characterization of A Novel Hyper-Cross-Linked Polyphosphamide Polymer and Its Adsorption for Phenol

A WATER-COMPATIBLE PHENOLIC HYDROXYL MODIFIED POLYSTYRENE AS AN ADSORBENT FOR ADSORBING PHENOLIC COMPOUNDS FROM AQUEOUS SOLUTIONS

Catechol-Based Porous Organic Polymers for Effective Removal of Phenolic Pollutants from Water

Lanthanum-modified sepiolite for real application of phosphate removal from rural sewage

Adsorptive removal of phenol from aqueous phase by using a porous acrylic ester polymer.

Effective removal of heavy metals from water using porous lignin-based adsorbents

Optimizing sulfonation process of polystyrene waste for hardness and heavy metal removal

Polymerized PEI-modified lignin polyphenolic materials by acid hydrolysis-phase separation for removal of Cr (VI) from industrial wastewater

Promising Low-Cost Adsorbent from Waste Green Tea Leaves for Phenol Removal in Aqueous Solution

Abatement of Aromatic Contaminants from Wastewater by a Heat/Persulfate Process Based on a Polymerization Mechanism.