Abstract:Sodium-ion battery (SIB) is acquiring considerable attention as a viable replacement to lithium-ion battery (LIB) technology in the ever-expanding energy storage market due to its attractive combination of homogeneous profusion in the earth and identical intercalation chemistry to LIB. However, SIB is still a laboratory child as SIBs exhibit slightly lower energy density as compared to those of LIBs. Hence, it is critical to determine a suitable cathode to facilitate facile Na-ion transport as cathode is the key factor affecting cycle life, energy density as well as safety. In case of SIBs, layered transition metal oxides are widely preferred as cathode material due to their excellent high specific capacity as well as their simple synthesis process. In this research, Manganese enriched P2 type quaternary Na 0.6 Fe 0.48 Mn 0.5 Ti 0.01 V 0.01 O 2 (NFMTV) cathode material is studied which shows high capacity and high voltage (4.2V) along with reducing Jahn-Teller (JT) Effect. However, inferior reversibility and capacity fading have still been a challenge, particularly for higher voltage window as lower Na content during discharge process initiates the unavoidable phase transition. To preserve the lattice orientation, a feasible approach is demonstrated in this research by introducing potassium (K) ion into Na ion sites between transition metal oxide (TMO 2 ) layers. This work explains that the K + into Na + ion layers serve as the supporting pillar to hold the stacking pattern intact even for very low Na content at higher voltage. As seen from the SEM and EDS analysis, no apparent alternation happened in surface morphology and crystal structure for a small amount of K doping. Furthermore, the XRD and Rietveld refinement results validate that emplacement of K + ions in the Na sites in the NFMTV crystal structure. It also expands the Na + ion diffusion path and substantially boosts the rate performance and reversibility. Besides, K + ion doping halts the gliding phenomenon and hence, phase transition is impeded which is observed from the improved cyclability and capacity retention.

Potassium doping improves the electrochemical performance of Na4MnCr(PO4)3 cathode for sodium-ion batteries

Electrochemical performance of Na4MnCr(PO4)3/C cathode affected by different transition metal dopants for sodium ion batteries

Boosting sodium-ion battery performance by anion doping in NASICON Na4MnCr(PO4)3 cathode

K Doping Stabilizes Three-Dimensional K0.2Na1.3Mn0.5O2-d As High-Performance Cathode for Sodium-Ion Batteries

Towards enhanced structural stability by investigation of the mechanism of K ion doping in Na3V2(PO4)3/C for sodium ion batteries

Mg2+and Mn2+ bimetallic co-doped Na3V2(PO4)3 as advanced cathode for sodium-ion batteries

P2-Type Na0.67mn0.72ni0.14co0.14o2 with K+ Doping As New High Rate Performance Cathode Material for Sodium-Ion Batteries

Na-site coordination environment regulation of Mn-based phosphate cathodes for sodium-ion batteries with elevated working voltage and energy density

High-Energy Na 4 MnCr(PO 4 ) 3 @C Cathode for Solid-State Sodium Metal Batteries

Inhibiting the Jahn‐Teller Effect of Manganese Hexacyanoferrate via Ni and Cu Co‐Doping for Advanced Sodium Ion Batteries

Suppressing vacancies and crystal water of sodium manganese iron-based Prussian blue analogue by potassium doping for advanced sodium-ion batteries

Benefits of vanadium doping in Na3MnTi(PO4)3/C as a potential candidate for sodium-ion batteries

P3-type layered Na0.26Co1−xMnxO2 cathode induced by Mn doping for high-performance sodium-ion batteries

Potency of Potassium Doping on Na-Ion Sites to Avert Phase Transition in P2 Type Sodium-Ion Battery

Inhibiting the Jahn-Teller Effect of Manganese Hexacyanoferrate Via Ni and Cu Codoping for Advanced Sodium-Ion Batteries

Boosting rate and cycling performance of K-doped Na3V2(PO4)2F3 cathode for high-energy-density sodium-ion batteries

Moisture stable and ultrahigh-rate Ni/Mn-based sodium-ion battery cathodes via K<SUP>+</SUP> decoration

Improvement on the High-Rate Performance of Mn-Doped Na3v2(Po4)(3)/C As A Cathode Material for Sodium Ion Batteries

Functional surface modification of P2-type layered Mn-based oxide cathode by thin layer of NASICON for sodium-ion batteries

Single-crystalline Mg-substituted Na4Mn3(PO4)2P2O7 nanoparticles as a high capacity and superior cycling cathode for sodium-ion batteries

Moisture stable and ultrahigh-rate Ni/Mn-based sodium-ion battery cathodes via K+ decoration