Abstract:Sodium-ion batteries (SIBs) have emerged as a promising alternative to lithium-ion batteries (LIBs) due to the abundance and low cost of sodium resources. Cathode material plays a crucial role in the performance of sodium ion batteries determining the capacity, cycling stability, and rate capability. Na3V2(PO4)3 (NVP) is a promising cathode material due to its stable three-dimensional NASICON structure, but its discharge capacity is low and its decay is serious with the increase of cycle period. We focused on modifying NVP cathode material by coating carbon and doping Nb5+ ions for synergistic electrochemical properties of carbon-coated NVP@C as a cathode material. X-ray diffraction analysis was performed to confirm the phase purity and crystal structure of the Nb5+ doped NVP material, which exhibited characteristic diffraction peaks that matched well with the NASICON structure. Nb5+-doped NVP@C@Nbx materials were prepared using the sol–gel method and characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Raman and Brunauer -Emmett-Teller (BET) analysis. First-principles calculations were performed based on density functional theory. VASP and PAW methods were chosen for these calculations. GGA in the PBE framework served as the exchange-correlation functional. The results showed the NVP unit cell consisted of six NVP structural motifs, each containing octahedral VO6 and tetrahedral PO4 groups to form a polyanionomer [V2(PO4)3] along with the c-axis direction by PO4 groups, which had Na1(6b) and Na2(18e) sites. And PDOS revealed that after Nb doping, the d orbitals of the Nb atoms also contributed electrons that were concentrated near the Fermi surface. Additionally, the decrease in the effective mass after Nb doping indicated that the electrons could move more freely through the material, implying an enhancement of the electron mobility. The electrochemical properties of the Nb5+ doped NVP@C@Nb cathode material were evaluated through cyclic voltammetry (CV), galvanostatic charge-discharge tests, electrochemical impedance spectroscopy (EIS), and X-ray photoelectric spectroscopy (XPS). The results showed that NVP@C@Nb0.15 achieved an initial discharge capacity as high as 114.27 mAhg−1, with a discharge capacity of 106.38 mAhg−1 maintained after 500 cycles at 0.5C, and the retention rate of the NVP@C@Nb0.15 composite reached an impressive 90.22%. NVP@C@Nb0.15 exhibited low resistance and high capacity, enabling it to create more vacancies and modulate crystal structure, ultimately enhancing the electrochemical properties of NVP. The outstanding performance can be attributed to the Nb5+-doped carbon layer, which not only improves electronic conductivity but also shortens the diffusion length of Na+ ions and electrons, as well as reduces volume changes in electrode materials. These preliminary results suggested that the as-obtained NVP@C@Nb0.15 composite was a promising novel cathode electrode material for efficient sodium energy storage.

Mg2+and Mn2+ bimetallic co-doped Na3V2(PO4)3 as advanced cathode for sodium-ion batteries

Benefits of vanadium doping in Na3MnTi(PO4)3/C as a potential candidate for sodium-ion batteries

Mnx+ Substitution to Improve Na3V2(PO4)2F3-Based Electrodes for Sodium-Ion Battery Cathode

Boosting sodium-ion battery performance with binary metal-doped Na3V2(PO4)2F3 cathodes

N-doped dual carbon-layer-modified Na3V2(PO4)3 as a high-performance cathode material for sodium-ion batteries

Boosting the rate capability and working lifespan of K/Co co-doped Na3V2(PO4)3/C for sodium ion batteries

MoO42−-mediated engineering of Na3V2(PO4)3 as advanced cathode materials for sodium-ion batteries

Synergistically Boosting Sodium-Storage Performance of Na 3 V 2 (PO 4 ) 3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Preparation of Nb5+ Doped Na3V2(PO4)3 Cathode Material for Sodium Ion Batteries

Towards enhanced structural stability by investigation of the mechanism of K ion doping in Na3V2(PO4)3/C for sodium ion batteries

Diatomic Doped Carbon Coating Boosting the High-Rate Performance and Super Long-Cycle Stability of Na3v2(Po4)3 Cathode Material

High-Rate-Capacity Cathode Based on Zn-Doped and Carbonized Polyacrylonitrile-Coated Na 4 MnV(PO 4 ) 3 for Sodium-Ion Batteries

Boosting rate and cycling performance of K-doped Na3V2(PO4)2F3 cathode for high-energy-density sodium-ion batteries

Rationally designed NASICON-type Na3.75V1.25Mn0.75(PO4)3 cathode towards long life-span sodium ion batteries

Stable cycling performance of lituium-doping Na3−xLixV2(PO4)3/C (0 ≤ x ≤ 0.4) cathode materials by Na-site manipulation strategy

Ration Design of Mn/Si-Codoped Na 3 V 2 (PO 4 ) 3 as Cathode Na-Ion Batteries

Optimizing quasi-solid-state sodium storage performance of Na3V2(PO4)2F2.5O0.5 cathode by structural design plus nitrogen doping

One–Step Synthesis of Three–Dimensional Na3V2(PO4)3/Carbon Frameworks as Promising Sodium–Ion Battery Cathode

Electrochemical performance of Na4MnCr(PO4)3/C cathode affected by different transition metal dopants for sodium ion batteries

Insights into Tiny High‐Entropy Doping Promising Efficient Sodium Storage of Na3V2(PO4)2O2F toward Sodium‐Ion Batteries

Na3V2(PO4)3: an advanced cathode for sodium-ion batteries