Abstract:Na3V2(PO4)3 (NVP) has become a hot material in the research field of sodium-ion batteries (SIBs) as a result of its unique structural advantages. Unfortunately, the poor electronic conductivity and ion diffusion ability fundamentally limit the practical development of NVP. Considering the above defects, a series of Li+ doped Na3−xLixV2(PO4)3/C cathode materials for SIBs are synthesized through hydrothermal assisted sol–gel method. The cell volume steadily decline with the raise of Li+ doping amount, which is consistent with the usual doping effect. Moreover, with the increase of lithium doping amount, Li+ preferentially occupies Na(2) site and then occupies Na(1) site. Through the first principles calculation, it is clear that the introduction of Li+ can significantly reinforce the conductivity of the material system and diminish the electron localization phenomenon. The analysis of (116) crystal plane by TEM shows that Li doping will reduce the interplanar spacing. The change of V valence during the charge–discharge process of Na2.8Li0.2V2(PO4)3/C is consistent with that of NVP by V element XANES characterization. There is no conventional phase transition phenomenon in the ex-situ XRD high-voltage charging state. The above facts indicate that lithium doping obtains a stable solid solution NVP. The electrochemical test results show that Na2.8Li0.2V2(PO4)3/C can provide an amazing reversible capacity of 116.9 mAh/g (theoretical capacity of 117 mAh/g) and capacity retention rate of 99.82 % after 500 cycles. GITT results show that Li+ can significantly increase the Na+ diffusion coefficient of the material. Such excellent electrochemical performance is attributed to the fact that the doping of Li+ activates the activity of Na+ in Na(2) site and improves the reaction efficiency.

Ration Design of Mn/Si-Codoped Na 3 V 2 (PO 4 ) 3 as Cathode Na-Ion Batteries

Ration Design of Porous Mn-doped Na3V2(PO4)3 Cathode for High Rate and Super Stable Sodium-Ion Batteries

Rationally designed NASICON-type Na3.75V1.25Mn0.75(PO4)3 cathode towards long life-span sodium ion batteries

Improvement on the High-Rate Performance of Mn-Doped Na3v2(Po4)(3)/C As A Cathode Material for Sodium Ion Batteries

Benefits of vanadium doping in Na3MnTi(PO4)3/C as a potential candidate for sodium-ion batteries

Internal Vanadium doping and external modification design of P2‐type layered Mn‐based oxides as competitive cathodes toward Sodium‐ion Batteries

Mnx+ Substitution to Improve Na3V2(PO4)2F3-Based Electrodes for Sodium-Ion Battery Cathode

Mg2+and Mn2+ bimetallic co-doped Na3V2(PO4)3 as advanced cathode for sodium-ion batteries

Mn-Rich Phosphate Cathodes for Na-Ion Batteries with Superior Rate Performance

A Multielectron-Reaction and Low-Strain Na 3.5 Fe 0.5 VCr 0.5 (PO 4 ) 3 Cathode for Na-Ion Batteries

Enhanced electrochemical performance of NASICON-type sodium ion cathode based on charge balance theory

A High-Energy NASICON-Type Na3.2MnTi0.8V0.2(PO4)3 Cathode Material with Reversible 3.2-Electron Redox Reaction for Sodium-Ion Batteries.

Multifunctional-Element Doping of NASICON-Structured Cathode Enables High-Rate and Stable Sodium Storage

Carbon coated Na3+xV2-xCux(PO4)3@C cathode for high-performance sodium ion batteries

V Doping in NASICON‐Structured Na3MnTi(PO4)3 Enables High‐Energy and Stable Sodium Storage

Chromium Doped NASICON-structured Na3MnTi(PO4)3/C Cathode for High-Performance Sodium-Ion Batteries

A robust carbon coating of Na3V2(PO4)3 cathode material for high performance sodium-ion batteries

Optimizing quasi-solid-state sodium storage performance of Na3V2(PO4)2F2.5O0.5 cathode by structural design plus nitrogen doping

Mo-doped Na3V2(PO4)3@C composites for high stable sodium ion battery cathode

Stable cycling performance of lituium-doping Na3−xLixV2(PO4)3/C (0 ≤ x ≤ 0.4) cathode materials by Na-site manipulation strategy

Construction of superior performance Na3V2-xCrx(PO4)2F3/C cathode by homovalent doping strategy toward enhanced sodium ion storage