Abstract:To effectively address the issue of premature failure caused by the unbalanced distribution of pressure drops between the stages of a traditional two-stage finger seal, this study proposes a method to improve the pressure drop balance by increasing the protection height of the second stage back plate. We established a new numerical calculation model for a two-stage finger seal, based on the porous media model. After verifying the precision of the model, we conducted a numerical analysis to examine the impact of the protection height of the second stage back plate on the flow and heat transfer characteristics of the two-stage finger seal. We then conducted a differentiated structural design for each stage of the two-stage finger seal. The research results are as follows: the pressure drop at the second stage of the traditional two-stage finger seal exceeds that of the first stage; when the protection height of the second stage back plate of the traditional two-stage finger seal is increased from 1.5 mm to 1.57 mm, forming a two-stage pressure equalizing finger seal structure, the pressure drop between the two stages is balanced, but the leakage is greater than that of the traditional two-stage finger seal; a grate seal structure was arranged between the first and second stages of the two-stage pressure equalizing finger seal to form a two-stage pressure equalizing finger seal with grate teeth, which exhibits significantly lower leakage compared to the two-stage pressure equalizing finger seal. However, the proportion of pressure drop at the first and second stages of the two-stage pressure equalizing finger seal is 36.8% and 42.1%, respectively, while the grate tooth stage accounts for 21.1%, resulting in an imbalanced pressure drop once again. Increasing the protection height of the second stage back plate in the two-stage pressure equalizing finger seal with grate teeth to 1.6 mm results in a 37.5% pressure drop at the first and second stages, and a 25% pressure drop at the grate tooth stage. The two-stage finger seal balances the pressure drop and matches the leakage of the traditional two-stage finger seal. The maximum temperatures of the first and second stages of the finger seal are 0.7% lower and 2.6% higher compared to the traditional two-stage finger seal. This suggests that a differential multi-stage finger seal is the optimal structure.

Research On Fractal Heat Flow Characterization Of Finger Seal Considering The Heat Transfer Effect Of Contact Gaps On Rough Surfaces

Analytical and Experimental Method of Thermal Load Estimation for Seals in Transmission of Vehicle

The Wear of Seal Fins During High-Speed Rub Between Labyrinth Seal Fins and Honeycomb Stators at Different Incursion Rates.

Leakage, heat transfer and thermal deformation analysis method for contacting finger seals based on coupled porous media and real structure models

Frictional Heat Transfer Regularity of the Fluid Film in Mechanical Seals

Application of Fractal Contact Model in Dynamic Performance Analysis of Gas Face Seals

A Leakage Model of Contact Mechanical Seals Based on the Fractal Theory of Porous Medium

Friction and Temperature Reduction in a Mechanical Face Seal by a Surface Texturing: Comparison between TEHD Simulations and Experiments

Wear modelling and sealing performance prediction of C/C composite finger seal

Three-Dimensional Coupling Analysis of Flow and Thermal Performance of A Mechanical Seal

Normal Load of Internal Combustion Engine Junction Based on Fractal Theory of Thermal Elasto-Plastic Contact

Study on Interstage Pressure Equalization of Differential Multi-Stage Finger Seal with Structural Design, Flow and Heat Transfer Characteristics

The effect of surface roughness on thermal-elasto-hydrodynamic model of contact mechanical seals

Dynamic Leakage Analysis of Noncontacting Finger Seals Based on Dynamic Model

Research on Micro Gap Flow Field Characteristics of Cylindrical Gas Film Seals Based on Experimental and Numerical Simulation

A Leakage Rate Model for Metal-to-Metal Seals Based on the Fractal Theory of Porous Medium

Coupling Analysis of Frictional Heat of Fluid Film and Thermal Deformation of Mechanical Seal End Faces

Temperature Field and Performance Analysis of Brush Seals Based on FEA-CFD and the Porous Medium of Anisotropic Heat Transfer Models

Research on Heat Transfer Coefficient of Spiral Groove Dry Gas Seals

Numerical Analysis of Heat Transfer Coefficient in Mechanical Face Seals

Thermo-Hydrodynamic Effect of Gas Split Floating Ring Seal with Rayleigh Step Grooves