Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Aerospace materials like Ti6Al4V and Inconel 718 have exceptional abilities such as high strength, good corrosion resistance, and low specific weight. These properties make them difficult to machine due to rapid tool wear, high cutting forces, and heat generation. Microstructural characterization has been performed for these alloys to identify the phases and precipitates. With the help of machining simulations, experimental trial and error can be avoided. Numerical simulations predict the behavior of materials like Ti6Al4V and Inconel 718 under various machining conditions. They provide insights into stress distribution, temperature rise, and chip formation, which are crucial for understanding how these materials respond to machining. By simulating different cutting parameters (e.g. speed, feed rate, and depth of cut), optimal conditions can be identified to minimize tool wear, improve surface finish, and reduce machining time. Achieving a high-quality surface finish is challenging with these materials. Simulations can predict the impact of different machining parameters on surface integrity, allowing for adjustments before actual machining. Three-dimensional finite element-based machining simulations are performed using the ABAQUS. The current work includes Johnson-Cook damage model parameters included in the simulation with the aid of the program ABAQUS/EXPLICIT. The numerous sets of tests carried out are also stated, along with the workpiece and tool-optimized geometry. The outcomes for cutting forces about time for Ti6Al4V and Inconel 718 are retrieved. The arbitrary Lagrangian–Eulerian approach has been used for these simulations. A coupled thermo-mechanical study is conducted on different sets of materials under various machining conditions. In addition, ultrasonic-assisted cutting on aerospace materials is also being studied, along with a comparison of the cutting forces used by conventional cutting. On the surfaces of aerospace materials that have been machined, temperature and von Mises stress distribution are discussed for both ultrasonic-assisted cutting and conventional cutting. The reaction forces generated for titanium alloy Ti6Al4V under conventional cutting are cutting force (RF3), and the thrust force (RF2) were 56 and 14 N, respectively. For the Inconel 718, the cutting and thrust forces are 75 and 27 N, respectively. The maximum temperature and stress under conventional cutting attained in Ti6Al4V are 670 K and 1.74 GPa, respectively. For the Inconel 718, the maximum temperature and stress under conventional cutting are 596 K and 1.65 GPa. There is a reduction in the forces, maximum temperature, and stress for the ultrasonic-assisted cutting.

Machining Efficiency and Property Change Analysis of Ti-6Al-4V Alloy Processed by Abrasive Water Jet Machining

Abrasive waterjet machining of titanium alloy using an integrated approach of taguchi-based passing vehicle search algorithm

Experimental investigation on surface characteristics of Ti6Al4V alloy during abrasive water jet machining process

Statistical modelling of depth milling in Ti-6AL4V using abrasive water jet machining

Evaluation of the Depth and Width of Cuts after Controlled-Depth Abrasive Water Jet Machining Using Low Pressure

Study on machinability characteristics of novel additive manufactured titanium alloy (Ti-6Al-4V) fabricated by direct metal laser sintering

Exploring cutting parameters for enhanced performance in abrasive water jet machining of Al 6061 hybrid nanocomposite

An Experimental Investigation on Machining of Hardened AISI 440C Stainless Steel Using Abrasive Water Jet Machining Process

Revealing the WEDM Process Parameters for the Machining of Pure and Heat-Treated Titanium (Ti-6Al-4V) Alloy

Experimental and numerical investigations of aerospace alloys: Effect of machining

Parametric Optimization of AWJM Using RSM-Grey-TLBO-Based MCDM Approach for Titanium Grade 5 Alloy

An integrated systematic investigation of the process variables on surface generation in abrasive flow machining of titanium alloy 6Al4V

A Statistical and Optimization Study on the Influence of Different Abrasive Types on Kerf Quality and Productivity during Abrasive Waterjet (AWJ) Milling of Ti-4Al-6V

Evaluation of the Machinability of Ti-6Al-4V Titanium Alloy by AWJM Using a Multipass Strategy

An experimental assessment and optimisation of hole quality in Al2024-T3 aluminium alloy during abrasive water jet machining

Experimental Investigation and Molecular Dynamics Simulation of Contributing Variables on Abrasive Water Jet on Aluminum Alloy 7075 Reinforced with Al2O3, Graphite and Silicon Carbide

Minimization of surface roughness and residual stress in abrasive water jet cutting of titanium alloy Ti6Al4V

Characterization and Optimization of Abrasive Water Jet Machining Parameters of aluminium/silicon carbide Composites

Enhancing High-Alloy Steel Cutting with Abrasive Water Injection Jet (AWIJ) Technology: An Approach Using the Response Surface Methodology (RSM)

Machinability and pulse characteristics of Ti-16Al-14Nb (α/β) alloy in wire-electric discharge machining process: A surface integrity study

Tool surface modification methodology to improve the machinability of Ti6Al4V through combination of micro-EDM texturing and AlSi-10Mg soft coating techniques in dry turning