Abstract:Currently, there is a demand in the aerospace industry for a more effective and non-invasive milling technique for powder metallurgy γ-TiAl alloy. The primary objective of this research is to examine the surface milling process of a γ-TiAl alloy generated by powder metallurgy. The primary objective of this study is to examine the impact of process parameters on the surface roughness and cutting force of the alloy, with the aim of optimizing both surface roughness and cutting force. The response surface method was implemented to examine the milling process, and the NSGA II algorithm was employed to optimise surface roughness, cutting force, and material removal rate. The findings indicate that the cutting depth exerts a significant impact on both the surface morphology and surface roughness. The available data indicates a clear correlation between the depth of cutting and the rate of feed, as well as the resulting assessment of surface roughness. Nevertheless, the first rise in spindle speed is associated with a subsequent increase in surface roughness, followed by a subsequent drop of a lesser magnitude. A minimal threshold for surface roughness has been established at 0.203μm. The spindle speed exerts the primary impact on the cutting force. There exists a positive link between the cutting force value and both the cutting depth and feed speed, as the cutting force value has a positive correlation with the incremental changes in these variables. Nevertheless, the relationship between cutting force and the observed trend is non-linear, exhibiting an initial decrease followed by a rise when cutting force is augmented. The minimal cutting force necessary was quantified as 112.3 N. Subsequently, a regression analysis was employed to develop a correlation model between surface roughness and cutting force. and machining parameters. The confirmation of the coefficients' validity in the model was achieved via the utilisation of analysis of variance (ANOVA) and residual analysis. The main goal of developing a machining parameter optimisation model is to limit surface roughness and cutting force, thereby improving operational efficiency. The NSGA-II method is utilised to tackle the problem of multi-objective optimisation, leading to the attainment of the optimal parameter solution. The purpose of the verification test is to evaluate the precision of the forecasts generated by the optimised model. The work holds importance in its analysis and juxtaposition of diverse processing factors, alongside the use of multi-objective optimization methodologies.

Parametric Optimization of AWJM Using RSM-Grey-TLBO-Based MCDM Approach for Titanium Grade 5 Alloy

Abrasive waterjet machining of titanium alloy using an integrated approach of taguchi-based passing vehicle search algorithm

Influence of optimal process parameters for abrasive water jet machining of DMR249A using multi-response optimisation techniques

Simultaneous optimization of process parameters during abrasive water jet machining on glass fibre reinforced polymer

Statistical modelling of depth milling in Ti-6AL4V using abrasive water jet machining

Optimal Parameter Selection In Robotic Belt Polishing For Aeroengine Blade Based On Gra-Rsm Method

Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP)

Multi-Objective Optimization in WEDM Process of Titanium Alloy (Ti-3Al-2.5V-2.0WC) using Desirability Approach

Study on Machining Quality in Abrasive Water Jet Machining of Jute-Polymer Composite and Optimization of Process Parameters through Grey Relational Analysis

Multi-Objective Optimization Of Edm Process Parameters Using Rsm-Based Gra And Topsis Method For Grade 6 Titanium Alloy

Study on Multi-Objective Optimization of Milling Process of Powder Metallurgy Titanium Aluminum Alloys

Multi-Objective Optimization of Micro-Milling Titanium Alloy Ti-3Al-2.5V (Grade 9) Using Taguchi-Grey Relation Integrated Approach

A Study on Optimum Machinability of NiTi Shape Memory Alloy Via AWJ

Analysis and optimization of cutter geometric parameters for surface integrity in milling titanium alloy using a modified grey–Taguchi method

Multi-objective optimization of machining parameters during green machining of aerospace grade titanium alloy using Grey–Taguchi approach

Multi-Response Optimization of Abrasive Waterjet Cutting on r-GO-Reinforced Fibre Intermetallic Laminates through Moth–Flame Optimization Algorithm

Multi-response optimization on the effect of wet and eco-friendly cryogenic turning of D2 steel using Taguchi-based grey relational analysis

A hybrid approach for machining optimization of the WEDM using grey-fuzzy with Metaphor-Less algorithms for Ti-3Al-2.5V

Abrasive aqua jet machining of NiTiV ternary smart alloy

Machining Efficiency and Property Change Analysis of Ti-6Al-4V Alloy Processed by Abrasive Water Jet Machining

Enhancing High-Alloy Steel Cutting with Abrasive Water Injection Jet (AWIJ) Technology: An Approach Using the Response Surface Methodology (RSM)