Abstract:Sodium vanadate NaV6O15 (NVO) is one of the most promising cathode materials for sodium-ion batteries because of its low cost and high theoretical capacity. Nevertheless, NVO suffers from fast capacity fading and poor rate capability. Herein, a novel free-standing NVO/multiwalled carbon nanotube (MWCNT) composite film cathode was synthesized and designed by a simple hydrothermal method followed by a dispersion technique with high safety and low cost. The kinetics analysis based on cyclic voltammetry measurements reveals that the intimate integration of the MWCNT 3D porous conductive network with the 3D pillaring tunnel structure of NVO nanorods enhances the Na+ intercalation pseudocapacitive behavior, thus leading to exceptional rate capability and long lifespan. Furthermore, the NVO/MWCNT composite exhibits excellent structural stability during the charge/discharge process. With these benefits, the composite delivers a high discharge capacity of 217.2 mA h g–1 at 0.1 A g–1 in a potential region of 1.5–4.0 V. It demonstrates a superior rate capability of 123.7 mA h g–1 at 10 A g–1. More encouragingly, it displays long lifespan; impressively, 96% of the initial capacity is retained at 5 A g–1 for over 500 cycles. Our work presents a promising strategy for developing electrode materials with a high rate capability and a long cycle life.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21328?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21328</a>.SEM images of the NVO and NVO/MWCNTs, XRD patterns of as-prepared samples, TGA curve of NVO/MWCNTS, the first discharge/charge profiles of the NVO and NVO/MWCNTs at 0.1 A g–1, differential capacity dQ/dV plots versus voltage at 0.1 A g–1 of the NVO and NVO/MWCNTs, galvanostatic profiles of the NVO and NVO/MWCNTs at 1 A g–1, Raman modes of NVO and their assignments, comparison of current densities and discharge capacities between NVO and NVO/MWCNT electrodes, comparison of current densities and discharge capacities between this work and reported vanadium-based cathode materials, comparison of the capability of NVO/MWCNTs and other vanadium-based nanomaterials, differential capacity dQ/dV plots of NVO/MWCNTs versus voltage at 5 A g–1, NVO CV curves at different scan rates, XRD patterns of NVO/MWCNTS at 1 A g–1 after 200 cycles, XRD patterns of NVO/MWCNTs after 100 cycles at various current densities, the ex situ Raman spectra of NVO/MWCNTs at different charge/discharge states, and the corresponding galvanostatic charge and discharge curves at 0.2 A g–1, EDs elemental mapping of the NVO/MWCNT cathode after 200 cycles, digital image of the cycled freestanding NVO/MWCNT composite film after 200 cycles at 1 A g–1, and preparation of the freestanding NVO/MWCNT composite cathode (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21328/suppl_file/am0c21328_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ultralong-Lifespan Magnesium Batteries Enabled by the Synergetic Manipulation of Oxygen Vacancies and Electronic Conduction

High-rate performance magnesium batteries achieved by direct growth of honeycomb-like V2O5 electrodes with rich oxygen vacancies

Hierarchical Nitrogen-doped Carbon Nanocages As High-rate Long-life Cathode Material for Rechargeable Magnesium Batteries

Valence Engineering via In Situ Carbon Reduction on Octahedron Sites Mn3O4 for Ultra‐Long Cycle Life Aqueous Zn‐Ion Battery

Highly Branched VS4 Nanodendrites with 1D Atomic‐Chain Structure as a Promising Cathode Material for Long‐Cycling Magnesium Batteries

Coupling Manipulation of Interfacial Chemistry and Coordination Structure in Vanadium Oxides Enables Rapid Magnesium Ion Diffusion Kinetics

Water-Pillared Sodium Vanadium Bronze Nanowires for Enhanced Rechargeable Magnesium Ion Storage

Ether–Water Hybrid Electrolyte Contributing to Excellent Mg Ion Storage in Layered Sodium Vanadate

Organic Molecular Intercalation Enabled Anionic Redox Chemistry with Fast Kinetics for High Performance Magnesium Storage

Pseudocapacitive Ti-Doped Niobium Pentoxide Nanoflake Structure Design for a Fast Kinetics Anode toward a High-Performance Mg-Ion-Based Dual-Ion Battery

Anion vacancy engineering in carbon coating VS4 microspheres assembled by nanorod arrays for high-performance rechargeable Mg-Li hybrid batteries

Freestanding Sodium Vanadate/Carbon Nanotube Composite Cathodes with Excellent Structural Stability and High Rate Capability for Sodium-Ion Batteries

High-Capacity Layered Magnesium Vanadate with Concentrated Gel Electrolyte toward High-Performance and Wide-Temperature Zinc-Ion Battery

Atomic Substitution Enabled Synthesis of Vacancy-Rich Two-Dimensional Black TiO 2- x Nanoflakes for High-Performance Rechargeable Magnesium Batteries.

Toward High‐Performance Mg/S Batteries with M4‐Assisted Mg(AlCl4)2/PYR14TFSI/DME Electrolyte and MoS2@CMK/S Cathode

High‐Energy Interlayer‐Expanded Copper Sulfide Cathode Material in Non‐Corrosive Electrolyte for Rechargeable Magnesium Batteries

Amorphous quantum dots enable V2O5 with superior Mg storage

Ni-doped MnO2/CNT Nanoarchitectures As a Cathode Material for Ultra-Long Life Magnesium/lithium Hybrid Ion Batteries

Porous Spinel Magnesium Manganese Oxide/Multiwalled Carbon Nanotubes Composite Synthesized by Electrochemical Conversion as High-Performance Cathode for Aqueous Magnesium Ion Battery

Flexible three-dimensional-networked iron vanadate nanosheet arrays/carbon cloths as high-performance cathodes for magnesium ion batteries

Maximizing Magnesiation Capacity of Nanowire Cluster Oxides by Conductive Macromolecule Pillaring and Multication Intercalation