Abstract:Portable electronics and their commercial use are strongly dependent on the prize, performance and life cycle of the rechargeable batteries. This is even truer for the use in electric vehicles. Currently used Li+-ion batteries represent the state of art technology but there still is a strong demand for further improvement [1,2]. Low abundance and thus high costs for lithium have initiated intensive research for the possible replacement of lithium by other more abundant metals such as magnesium and sodium [3]. Ionic, electronic and chemical characteristics of Li+-, Na+- and Mg2+-ions are different and therefore host materials appropriate for Li+-ions intercalation are not necessarily suitable for Mg2+ and Na+ ions – as well known for the case of graphite anodes. The cathode material V2O5 is one candidate which already showed good performance not just for Li+ but also for Mg2+ and Na+ions [4,5]. Since the morphology and structure of the host materials strongly influence the intercalation process, in this study efforts have been done to synthesize V2O5 with different morphology by applying different synthetic routes and choosing the best material for the metal ion intercalation. V2O5 was prepared by means of sonochemical modification of commercial V2O5 powder, anodization of V metal, electrochemical deposition and hydrothermal synthesis. The obtained materials were characterized by means of scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The sonochemical treatment and electrochemical deposition yielded V2O5-nanofibers, the anodization method V2O5-nanotubes and the hydrothermal synthesis hollow nanospheres of V2O5. The performance of the obtained materials was tested by several electrochemical techniques such are cyclic voltammetry, potentiostatic intermittent titration technique (PITT) and galvanostatic charge/discharge cycles. Li, Na and Mg intercalation were studied. For Li, the rate capability of the sonochemically prepared material was clearly improved compared to commercial, microcrystalline V2O5, but the available voltage at a given discharge capacity was less. The electrodeposited material showed a rather poor performance, while the hollow nanospheres behaved very promising. Also for Na intercalation the latter material showed reasonable performance. First measurements for Mg insertion are shown as well. [1] Dunn B. et al., Electrical Energy Storage for the Grid: A Battery of Choices, Science 334 (2011) 928 [2] Gachot G. et al., Deciphering the multi-step degradation mechanisms of carbonate-based electrolyte in Li batteries, Journal of Power Sources 178 (2008) 409 [3] Besenhard J. et al., Advances in battery technology: rechargeable magnesium batteries and novel negative-electrode materials for lithium ion batteries, ChemPhysChem 3 (2002) 155 [4] Gershinsky G. et al., Electrochemical and Spectroscopic Analysis of Mg2+ Intercalation into Thin Films Electrodes of Layered Oxides: V2O5 and MoO3, Langmuir 29 (2013) 10964 [5] Su D. W. et al., Hierarchical orthorhombic V2O5hollow nanospheres as high performance cathode materials for sodium-ion batteries, J. Mater. Chem. 2 (2014) 11185

Amorphous quantum dots enable V2O5 with superior Mg storage

Unexpected discovery of magnesium-vanadium spinel oxide containing extractable Mg2+ as a high-capacity cathode material for magnesium ion batteries

Vanadium Oxide Pillared by Interlayer Mg2+ Ions and Water As Ultralong-Life Cathodes for Magnesium-Ion Batteries

Implanting CuS Quantum Dots into Carbon Nanorods for Efficient Magnesium-Ion Batteries

Porous Spinel Magnesium Manganese Oxide/Multiwalled Carbon Nanotubes Composite Synthesized by Electrochemical Conversion as High-Performance Cathode for Aqueous Magnesium Ion Battery

V2O5 As the Cathode for Mg2+-Ion Batteries, Preparation and Characterization

Crystal reconstruction of V2O3/carbon heterointerfaces via anodic hydration for ultrafast and reversible Mg‐ion battery cathodes

Maximizing Magnesiation Capacity of Nanowire Cluster Oxides by Conductive Macromolecule Pillaring and Multication Intercalation

Intercalation-Type V 2 O 3 with Fast Mg 2+ Diffusion Kinetics for High-Capacity and Long-Life Mg-Ion Storage

Vanadium Molybdenum Disulfide Nanosheets Anchoring on Carbon Cloth as High‐Energy Density Cathode for Magnesium–Lithium Hybrid Batteries

Ether–Water Hybrid Electrolyte Contributing to Excellent Mg Ion Storage in Layered Sodium Vanadate

Coupling Manipulation of Interfacial Chemistry and Coordination Structure in Vanadium Oxides Enables Rapid Magnesium Ion Diffusion Kinetics

Water-Pillared Sodium Vanadium Bronze Nanowires for Enhanced Rechargeable Magnesium Ion Storage

Flexible three-dimensional-networked iron vanadate nanosheet arrays/carbon cloths as high-performance cathodes for magnesium ion batteries

High-Capacity Layered Magnesium Vanadate with Concentrated Gel Electrolyte toward High-Performance and Wide-Temperature Zinc-Ion Battery

Highly Branched VS4 Nanodendrites with 1D Atomic‐Chain Structure as a Promising Cathode Material for Long‐Cycling Magnesium Batteries

Hybrid Mg/Li-ion Batteries Enabled by Mg2+/Li+ Co-Intercalation in VS4 Nanodendrites

Ca2+ pre-intercalated bilayered vanadium oxide for high-performance aqueous Mg-ion batteries

Anion vacancy engineering in carbon coating VS4 microspheres assembled by nanorod arrays for high-performance rechargeable Mg-Li hybrid batteries

Fabrication of Nitrogen-Doped Carbon-Coated NiS1.97 Quantum Dots for Advanced Magnesium-Ion Batteries

Modulating Selective Interaction of NiOOH with Mg Ions for High-Performance Aqueous Batteries