Abstract:The crystal model of NaCl-type FCC-TiC (1− x ) N x was established, and the crystal structure of nonstoichiometric TiC (1− x ) N x was optimized by first-principles calculation method. The binding energy, formation energy, elastic modulus, density of states (DOS) and charge density of TiC (1− x ) N x were calculated. The crystal structure, electronic structure and mechanical properties of TiC (1− x ) N x were studied. The effects of bonding types and bonding properties on the mechanical properties were analyzed. The results show that the optimized TiC (1− x ) N x crystal structure, with the increase in N content, lattice constant and cell volume decrease, TiN crystal structure is easy to form, and its thermodynamics is the most stable. The analysis of B/G, B/C44, Cauchy pressure and Poisson's ratio shows that TiC has the highest brittleness, and TiN has the best toughness, while TiC (1− x ) N x is between TiC and TiN. The covalent bonds are mainly Ti-C and Ti-N bonds, but there are also a certain number of C-N bonds, Ti-C and Ti-N ionic bonds, and Ti-Ti metallic bonds. The doping of N changes the interaction force between the electrons in the metallic d layer and the non-metallic 2p orbital electrons, and also changes the interaction force between the electrons in the metallic bond d layer, thus affecting the hardness and toughness of TiC (1− x ) N x . As C atoms are gradually replaced by C atoms in the TiC (1− x ) N x crystal structure, the density of states at EF gradually increases, which leads to the enhancement of the metal bond Ti d –Ti d , thereby improving the conductivity of the material. The transition from Ti–C bond to Ti–N bond leads to the decrease in covalent bond, the enhancement of ionic property, the increase in hardness and the decrease in toughness. The nonstoichiometric TiC (1− x ) N x powders were synthesized by carbothermal reduction technique, and the lattice constants obtained by XRD were basically consistent with the calculated values. XPS analysis shows that there are Ti–C, Ti–N, C–C and C–N bonds in TiC (1− x ) N x . The experimental results are in good agreement with the calculated electronic structure and bond type, which indicates the reliability of the crystal model and calculation method.

First-principles calculations for development of low elastic modulus Ti alloys

First principles study of low Young's modulus Ti–Nb–Zr alloy system

The first-principles calculations for the elastic properties of Zr2Al under compression

First Principles Studies on the Elastic, Thermodynamic Properties and Electronic Structure of Ti15−xMoxSn Compounds

Study of low-modulus biomedical β Ti–Nb–Zr alloys based on single-crystal elastic constants modeling

First principles calculation on electronic structures and mechanical properties of TiCrTaV high–entropy alloy

Elastic behavior of binary and ternary refractory multi-principal-element alloys

Effect of Zr, Hf, and Sn Additives on Elastic Properties of Α2-Ti3al Phase by First-Principles Calculations

Single-phase formation and mechanical properties of (TiZrNbTaMo)C high-entropy ceramics: First-principles prediction and experimental study

Peculiar elastic behavior of Ti–Nb–Ta–Zr single crystals

Influence of Nb and Mo Contents on Phase Stability and Elastic Property of Β-Type Ti-X Alloys

Single crystal shear moduli of β-phase stabilized by thermomechanical treatment in TiNbSn alloys with ultralow elastic modulus

The Structural, Elastic, and Electronic Properties of Zr X Nb 1− X C Alloys from First Principle Calculations

Structure, elastic and bonding properties of hcp ZrxTi1-x binary alloy from first-principles calculations

First-principles calculations to investigate phase stability, elastic and thermodynamic properties of TiMoNbX (X=Cr, Ta, Cr and Ta) refractory high entropy alloys

First-principles Calculations of Mechanical and Thermodynamic Properties of Tungsten-Based Alloy

First-Principles Study on the Mechanical Properties and Electronic Structure of Nonstoichiometric TiC(1−x)Nx

Theoretical insights on elastic anisotropy and thermal anisotropy of TM5Al3C (TM= Zr, Hf, and Ta) carbides

Recently synthesized (Zr1-xTix)2AlC (0 - x - 1) solid solutions: Theoretical study of the effects of M mixing on physical properties

Temperature-dependent elastic properties of binary and multicomponent high-entropy refractory carbides

First Principles Calculations on Elastic, Thermodynamic and Electronic Properties of Co2Zr and Co2Ti at High Temperature and Pressure