Abstract:A strategy to dynamically regulate the conversion of LiPSs to Li2S through a LiPSs Redox Regulator (RR) organic sulfur electrolyte additive 4‐mercaptopurine (4Mpy), as an electrolyte additive is proposed. Benefiting from the bridging and conversion with LiPSs, the conversion kinetics of LiPSs to Li2S are significantly enhanced. The Li‐S batteries with 4Mpy achieve a high capacity of 10.05 mAh cm−2 after 10 cycles under a high loading of 10.88 mg cm−2. This work provides an electrolyte additive strategy to promote the slow kinetics of LiPSs. Lithium‐sulfur (Li‐S) batteries offer promising prospects due to their high energy density and cost‐effectiveness. However, the sluggish kinetics of lithium polysulfides (LiPSs) conversion, particularly the crucial stage from LiPSs to lithium sulfide (Li2S), hampers their development. Herein, a novel strategy for dynamically regulating LiPSs conversion by incorporating 4‐mercaptopyridine (4Mpy), as a LiPSs Redox Regulator (RR) in the electrolyte is introduced. This organic sulfur additive actively interacts with LiPSs during discharge, facilitating rapid conversion and promoting the formation of a three‐dimensional (3D) Li2S structure, thereby enhancing reaction kinetics. Both theoretical and experimental results reveal that the redox conversion mechanism with the 4Mpy additive differs from traditional electrolytes. Upon lithiation, 4Mpy forms lithium‐pyridinethiolate (Li‐pyS), which reversibly engages in the LiPSs conversion during the charging/discharging cycles, significantly improving the redox process. As a result, the Li‐S battery with 4Mpy additive demonstrates superior performances, achieving 10.05 mAh cm−2 under a high sulfur loading of 10.88 mg cm−2, surpassing industrial benchmarks. This study not only presents an approach to mitigating the shuttle effect in Li‐S batteries but also offers valuable insights into electrolyte design for other metal batteries.

Improving Rate Performance of Encapsulating Lithium‐Polysulfide Electrolytes for Practical Lithium–Sulfur Batteries

An encapsulating lithium-polysulfide electrolyte for practical lithium–sulfur batteries

An Organodiselenide Comediator to Facilitate Sulfur Redox Kinetics in Lithium-Sulfur Batteries with Encapsulating Lithium Polysulfide Electrolyte.

Electrolytes with moderate lithium polysulfide solubility for high-performance long-calendar-life lithium–sulfur batteries

Electrolyte Structure of Lithium Polysulfides with Anti-Reductive Solvent Shells for Practical Lithium-Sulfur Batteries

Construction of Organic‐Rich Solid Electrolyte Interphase for Long‐Cycling Lithium–Sulfur Batteries

Electrochemical Active Interlayer with Porous Architecture for Reliable Lithium–sulfur Batteries

Dynamically Regulating Polysulfide Degradation via Organic Sulfur Electrolyte Additives in Lithium‐Sulfur Batteries

Revamping Lithium–Sulfur Batteries for High Cell‐Level Energy Density by Synergistic Utilization of Polysulfide Additives and Artificial Solid‐Electrolyte Interphase Layers

Electrolytes with Controlled Polysulfide Insolvability for Lithium-Sulfur Batteries

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries

A novel mixed ether-based electrolyte for lithium–sulfur batteries with Li anode protection by dual salts

Protecting Li Metal Anode While Suppressing “Shuttle Effect” of Li-S Battery Through Localized High-Concentration Electrolyte

Correlating Polysulfide Solvation Structure with Electrode Kinetics Towards Long‐Cycling Lithium–Sulfur Batteries

Shielding Polysulfide Intermediates by an Organosulfur‐Containing Solid Electrolyte Interphase on the Lithium Anode in Lithium–Sulfur Batteries

Tailored Electrolytes Enabling Practical Lithium–Sulfur Full Batteries Via Interfacial Protection

Enhanced electrochemical stability and ion transfer rate: A polymer/ceramic composite electrolyte for high-performance all-solid-state lithium-sulfur batteries

Linear ether-based highly concentrated electrolytes for Li-sulfur batteries

High-Performance Dual-Salt Electrolyte Based on Tetrahydrofuran and Dipropyl Ether for Lithium-Sulfur Battery

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Regulating Interface Dipole Interaction between Ethers and Active Species toward Highly Stable Li‐SPAN Batteries