Abstract:Deep cryogenic treatment (DCT) is a one time permanent process, carried out on steel components in such a way that the material is slowly cooled down to the cryogenic temperature, after which it is held at that temperature for a specified period of time and is heated back to room temperature at a slow rate followed by low temperature tempering. The main advantage of DCT is to enhance the wear resistance. The various levels of DCT process parameters have their own influence upon the wear resistance of the material. In this study, the Taguchi method has been used to optimize the process parameters of DCT for a commercial piston ring, made up of 18% Cr martensitic stainless steel (SR34) to obtain maximum wear resistance. The DCT parameters considered for optimization are: the cooling rate, the soaking temperature, the soaking time, the tempering temperature and the tempering time. In this regard, two iterations of Taguchi design have been used to arrive at the optimum DCT parameters. During the first iteration, L16215 orthogonal array (OA) was used to conduct the Taguchi experiment so as to study the significance of these factors and the effect of their possible two-factor interactions. In the second iteration, L934 OA was used to conduct the Taguchi experiment to arrive at the optimal levels. Wear test was conducted on a reciprocatory friction and wear monitor (RFWM) by weight loss method, as per ASTM standards G-181 and G-133. The relative importance of the controlling parameters of DCT and their interactions for enhancing the wear resistance was evaluated in terms of their percentage contributions using analysis of variance (ANOVA). The optimum levels of the significant DCT parameters for SR34 steel ring were arrived based on the maximum S/N ratio. A confirmation test was conducted subsequently, and the results were found to be within the confidence interval.

Enhancing tribological performance in PM Vanadis 6 steel through optimization of cryogenic and tempering treatment

Optimization of wear-, fracture- and corrosion performance of Vanadis 6 steel through cryogenic treatment and tempering

Effect of Cryogenic Treatments on Hardness, Fracture Toughness, and Wear Properties of Vanadis 6 Tool Steel

Achieving synergistic improvement of wear and mechanical properties in Ti–6Al–4V alloy by multiple cryogenic treatment

Improvement of Adhesive Wear Behavior by Variable Heat Treatment of a Tool Steel for Sheet Metal Forming

Impact of Cryogenic Treatment Process on the Performance of 51CrV4 Steel

Effects of Deep Cryogenic Treatment on Tribological Properties of the Tool Steel DC53

Microstructural Evolution and Mechanical Properties of 6cr13 Martensitic Stainless Steel Subjected to Cold Rolling and Heat Treatments

Cryogenic Treatment of Martensitic Steels: Microstructural Fundamentals and Implications for Mechanical Properties and Wear and Corrosion Performance

Effect of Deep Cryogenic Treatment on Wear Behavior of Cold Work Tool Steel

Optimization of deep cryogenic treatment conditions for the wear rate of UNS R56400 (Ti6Al4V) medical titanium alloy using Taguchi’s method

Deep Cryogenic Treatment Improves Wear Resistance of En 31 Steel

Evaluation of factors influencing deep cryogenic treatment that affect the properties of tool steels

EFFECTS OF CRYOGENIC TREATMENT ON MICROSTRUCTURE AND WEAR RESISTANCE OF Fe-0.35C-6.3Cr MARTENSITIC STEEL

Microstructure, Mechanical and Wear Behaviour of Deep Cryogenically Treated EN 52 Silchrome Valve Steel

Optimization of cryogenic treatment to maximize the wear resistance of 18% Cr martensitic stainless steel by Taguchi method

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100 Cr6 Bearing Steel

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100Cr6 Bearing Steel

Optimization of Deep Cryogenic Treatment Process for 100Cr6 Bearing Steel Using the Grey-Taguchi Method

Enhancing the Wear Resistance of 100Cr6 Bearing Steel Using Cryogenic Treatment