Abstract:In the classical planar heterojunction perovskite solar cells (PSCs), the electron conducting TiO2 layer shows lower conductivity than the hole transporting materials such as spiro-OMeTAD, which becomes one of the key problems in improving the power conversion efficiency (PCE) of PSCs. In this study, the surface of compact TiO2 layer is modified by a thin self-assembled dodecanedioic acid (DDDA) molecular layer. The TiO2 substrates are immersed into the DDDA solution for 0.5, 2.5, 4.5, 22 h, respectively. It is found that the PCE of PSCs is improved when using the DDDA modified TiO2, showing optimized PCE of 15.35% +/- 0.75% under AM 1.5G illumination at 100 mW.cm(-2) after 4.5 h modification. The short current density (J(SC)) of the best device is improved from 20.34 mA.cm(-2) to 23.28 mA.cm(-2), with the PCE increasing from 14.17% to 15.92%. And it is found that the hysteresis of the PSC is also reduced remarkably with hysteresis index decreasing from 0.4288 to 0.2430. In the meantime, the device with DDDA modification shows a significant improvement in light stability, keeping 71% of its initial PCE value after 720 min exposure under AM 1.5G illumination at 100 mW.cm(-2) without encapsulation. As a contrast, the device without DDDA modification keeps 59% of its initial PCE value under the same condition. To reveal the mechanism, we investigate the surface energy level change using ultraviolet photoemission spectroscopy. It is found that after DDDA modification, the valence-band maximum energy (E-VBM) of TiO2 decreases from -25 eV to -32 eV, and the conduction-band minimum energy (E-CBM) of TiO2 from -05 eV to -12 eV. The shifting of energy level optimizes the energy level alignment at the interface between the TiO2 and perovskite. It promotes the transport of electrons from perovskite layer to compact TiO2 layer and obstructs the transport of holes from perovskite layer to compact TiO2 layer more effectively. In addition, the decrease of E-CBM implies the increase of conductivity of TiO2. We further design a series of electrical experiments, and confirm that the modification improves the conductivity of TiO2 obviously with both contact resistance and thin-film resistance decreasing. In summary, our results indicate the enormous potential of the compact TiO2 layer with a thin self-assembled DDDA molecular layer modification to construct efficient and stable planar heterojunction PSCs for practical applications.

Performance boost of dye-sensitized solar cell by using barium titanate as a compact layer

Enhanced Performance of Dye Sensitized Solar Cells by Using a Reduced Graphene Oxide/tio 2 Blocking Layer in the Photoanode

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Photovoltaic Performance Improvement of Dye-Sensitized Solar Cells Through Introducing In-doped TiO2 Film at Conducting Glass and Mesoporous TiO2 Interface As an Efficient Compact Layer

Enhanced photovoltaic performances of the dye-sensitized solar cell by utilizing rare-earth modified tin oxide compact layer

Solar-To-Electric Performance Enhancement by Titanium Oxide Nanoparticles Coated with Porous Yttrium Oxide for Dye-Sensitized Solar Cells

Enhanced open-circuit voltage of dye-sensitized solar cells using Bi-doped TiO2 nanofibers as working electrode and scattering layer

Bi-layer Photoanode Films of Hierarchical Carbon-Doped Brookite-Rutile TiO2 Composite and Anatase TiO2 Beads for Efficient Dye-Sensitized Solar Cells

BaCO3 Modification of TiO2 Electrodes in Quasi-Solid-State Dye-Sensitized Solar Cells: Performance Improvement and Possible Mechanism

Charge Recombination Reduction in Dye-Sensitized Solar Cells by Depositing Ultrapure Tio2 Nanoparticles on "inert" Batio3 Films

Effect of modified titanium dioxide photoanode and agarose gel electrolyte on electrochemical studies of dye-sensitized solar cell

Barium titanate nanorods-nanoparticles embedded reduced graphene oxide nanocomposite photoanode for dye-sensitized solar cell

Method for fabricating the compact layer in dye-sensitized solar cells by titanium sputter deposition and acid-treatments

Hydrogenerated black titanium dioxide-embedded conducting polymer for boosting electron flow in perovskite devices

Highly efficient overlayer derived from peroxotitanium for dye-sensitized solar cells

Effect of BaTiO3 powder as an additive in perovskite films on solar cells

Modification of Dye-Sensitized Solar Cells With Sputter-Deposited Titanium Dioxide Blocking Layer for Enhanced Photovoltaic Performance Under Different Illuminations

Barium Titanate Perovskite Nanoparticles Integrated Reduced Graphene Oxide Nanocomposite Photoanode for High Performance for Dye-Sensitized Solar Cell

Improvement of current characteristic of perovskite solar cells using dodecanedioic acid modified TiO2 electron transporting layer

Shielding Effects Of Additives In A Cobalt(Ii/Iii) Redox Electrolyte: Toward Higher Open-Circuit Photovoltages In Dye-Sensitized Solar Cells

Effect of TiOx Compact Layer with Varied Components on the Performance of Dye-Sensitized Solar Cells