Abstract:In this study, we designed the processing windows for laser powder bed fusion (LPBF) of Ti-6Al-4V (Ti-64) alloy by using central composite design and made a detailed investigation into the influence of processing parameters on the defects. The purpose is to investigate the effect of defects on mechanical properties. It was found that insufficient energy density could lead to the formation of lack of fusion (LOF) defects and produce non-melted powders on the surface, while excessive energy density could lead to cracks that were detrimental to mechanical performance. In addition, the microstructural evaluation found that relatively low energy density could lead to shorter columnar prior-β grains, while prior-β grains in the sample processed by the high energy density extended almost the entire height of the cross-section, which could lead to the strong mechanical property anisotropy. The prior β grains are formed by heterogeneous nucleation on the partially melted material powder. As the energy input increases, all the powder powders in the molten pool can be melted so that these particles do not act as nucleation sites and the prior β grain can grow through more layers without forming new grains being able to nucleate. The prior β-grain in as-built Ti-64 samples consisted of acicular α’ martensite with myriads of lattice distortions, as a precursor to a phase transition, which lead to strong tensile strength and poor ductility. Annealing heat treatment promoted the improvement of the ductile performance of LPBF Ti-64. Overall, this study provides comprehensive views on the effects of processing parameters (laser power, scanning speed, and hatch distance) on the internal (pores and LOF) and external (unmelted powder, sintering neck, and crack), defects, microstructure, and tensile property evaluation of LPBF Ti-64, which offer insights for the development of additive manufactured titanium alloys with excellent mechanical property.

Dynamic Compressive Properties and Failure Mechanism of the Laser Powder Bed Fusion of Submicro-LaB6 Reinforced Ti-Based Composites

Microstructure and mechanical properties of in-situ hybrid reinforced (TiB+TiC)/Ti composites prepared by laser powder bed fusion

Synchrotron Characterisation of Ultra-Fine Grain TiB2/Al-Cu Composite Fabricated by Laser Powder Bed Fusion

Microstructure and mechanical properties of TiB 2 /Al-5Cu composites fabricated by multi-material laser powder bed fusion

Evolution of microtexture and performance in TaC/316L composites fabricated by laser powder bed fusion

Laser Additive Manufacturing of Titanium Alloys with Various Al Contents

Effects of the Build Direction on Mechanical Performance of Laser Powder Bed Fusion Additively Manufactured Ti6Al4V under Different Loadings

Laser powder bed fusion of Mo2C/Ti-6Al-4V composites with alternately laminated α′/β phases for enhanced mechanical properties

Microstructure evolution and mechanical properties strengthening in laser powder bed fusion of high-strength SiC and TiB2 co-reinforced Al-Zn-Mg-Cu composites

Laser Powder Bed Fusion of CoCrNi Composite with High Fraction of TiC: the Microstructure and Mechanical Properties at Different Temperatures

Effect of LaB6 on the Microstructure Evolution and Mechanical Properties of Ti-45Al-8Nb Alloy

Microstructure evolution and mechanical properties strengthening in laser powder bed fusion of high-strength SiC and TiB 2 co-reinforced Al-Zn-Mg-Cu composites

Effect of LaB6 Addition on the Microstructure and Properties of (ti3al + TiB)/Ti Composites by Laser Cladding

In Situ Alloying Based Laser Powder Bed Fusion Processing of Β Ti–Mo Alloy to Fabricate Functionally Graded Composites

Effect of laser additive manufacturing on the microstructure and mechanical properties of TiB2 reinforced Al-Cu matrix composite

From Crack-Prone to Crack-Free: Unravelling the Roles of LaB6 in a Β-Solidifying TiAl Alloy Fabricated with Laser Additive Manufacturing

Laser Powder Bed Fusion of Titanium Aluminides: An Investigation on Site-Specific Microstructure Evolution Mechanism

Effect of processing parameters on the defects, microstructure, and property evaluation of Ti-6Al-4V titanium alloy processed by laser powder bed fusion

High power laser powder bed fusion of Ti6Al4V alloy: The control of defects, microstructure, and mechanical properties

Laser powder bed fusion additive manufacturing, microstructure evolution, and mechanical performance of carbon nanotube-decorated titanium alloy powders

Effect of B on Microstructure and Tensile Properties of Laser Additive Manufactured TC4 Alloy