Soil and water assessment tool model for runoff reaction to land use variations by SWAT model package

Kaveh Ostad-ali-askari,Mohsen Ghane,Peiman Kianmehr

DOI: https://doi.org/10.31577/ahs-2023-0024.02.0034

2023-12-07

Acta Hydrologica Slovaca

Abstract:Slovenská akadémia vied vykonáva špičkový základný výskum, dlhodobý strategický a aplikovaný výskum a vývoj a poskytuje prístup k vedeckej infraštruktúre.

What problem does this paper attempt to address?

Application of SWAT model and SWAT-CUP software in simulation and analysis of sediment uncertainty in arid and semi-arid watersheds (case study: the Zoshk–Abardeh watershed)

Seyed Hashem Hosseini,Mohammad Reza Khaleghi

DOI: https://doi.org/10.1007/s40808-020-00846-2

2020-06-18

Modeling Earth Systems and Environment

Abstract:This research aimed to appraise the performance of the Soil and Water Assessment Tool (SWAT) model in sediment flow simulation and also to investigate the uncertainty of the model in the watershed areas of arid and semi-arid regions. In this survey, we used the Sequential Uncertainty Fitting ver.2 (SUFI-2) algorithm to assess the uncertainty and calibrate the model. Different factors of water resources are simulated, and we consider the crop yield and water quality at the Hydrological Response Units (HRU) level. Besides, to quantify the water resources, we implemented monthly time intervals. Also, we used monthly time intervals to quantify the water resources. The results showed that in a 3-year validation period (2007–2010), the P-factor and the r-factor were 0.28 and 0.38 respectively, while in the 7-year calibration period (2000–2006), these two factors were 0.29 and 0.39, respectively. The findings of this study proved that in the validation period, statistical indicators of model evaluation comprise R2, bR2, and the Nash–Sutcliffe efficiency (NSE) coefficients were 0.85, 0.23, and 0.47, respectively, while in the calibration period, these coefficients were 0.46, 0.14, and 0.37, respectively. The results of uncertainty and calibration analysis were acceptable, but in the validation phase, the model has been more applicable and useful. These results show the acceptable efficiency of the SWAT model in simulating the sediment load of the study area. To assess the sensitivities of 22 input parameters, we used SWAT Calibration Uncertainties Program (SWAT-CUP) and achieved three of the most sensitive parameters comprising CN2, SOL_BD, and USLE_P. In contrast, the parameters with the least sensitivity were SLSUBBSN, GW_DELAY, and ESCO. We can use the calibrated model as inputs for SWAT, to assess the impact of climate change on soil erosion.
Hydrological simulation and evaluation of drought conditions in the ungauged watershed Parishan lake Iran, using the SWAT model

Sara Ansarifard,Mahdi Ghorbanifard,Fardin Boustani,Hadi Abdolazimi

DOI: https://doi.org/10.2166/wcc.2024.268

IF: 2.803

2024-08-29

Journal of Water and Climate Change

Abstract:Lake Parishan has faced challenges of water scarcity in recent years to the extent that its water level has drastically decreased, and disappeared now. The SWAT model was utilized to evaluate changes in vegetation cover, precipitation, temperature, and evaporation on runoff and lake surface. We employed two strategies to examine runoff and lake level changes: investigating runoff variations based on land use land cover (LULC) changes and analyzing the intensity of hydrological changes during the simulation period on the watershed's runoff. One of the main challenges of the area was the lack of runoff data, in this research, for the purpose of improving simulation processes and calibration, data from donor watershed stations and Copernicus satellite information were utilized to assist other studies in investigating basins lacking runoff statistics. The results indicate runoff has been influenced by environmental changes, resulting in intensified evaporation and temperature fluctuations compared with the simulation time series. The accuracy of simulation evaluation based on runoff statistics from the neighboring Chamchit station has been more suitable. However, in the absence of sufficient statistics and information, Copernicus satellite data can be used.

water resources
SWAT and IHACRES models for the simulation of rainfall-runoff of Dez watershed

Mohamad Jaberzadeh,Ali Saremi,Hossein Ghorbanizadeh Kharazi,Hossein Babazadeh

DOI: https://doi.org/10.1007/s00382-022-06215-2

IF: 4.901

2022-04-12

Climate Dynamics

Abstract:Due to the scarcity of meteorological observation stations in some areas, there is not enough data available for hydrological simulation as one of the main subjects of hydrology and environmental subjects. This can be partially solved by extracting the required data from global climate centers. The essential data for modeling rainfall-runoff of Dez watershed (16,000 km2), Khuzestan province, Iran, for a 20-year period (1990–2010) were obtained from NCEP CFSR climate center. The simulation (calibration and validation) was done by Soil and Water Assessment Tool (SWAT) and Identification of Unit Hydrographs and Component Flows from Rainfall, Evapotranspiration and Streamflow (IHACRES) models. The SWAT-CUP software has been used for optimization, calibrating and analyzing the uncertainty of the SWAT model by communicating with the model. The ability of the models to simulate the runoff of the basin was determined using the coefficient of determination (R2) and Nash–Sutcliffe efficiency (NSE). R2 and NSE for the SWAT model were 0.75, and 0.78 (calibration), and 0.59 and 0.72 (validation); for the IHACRES model, they were equal to 0.63 and 0.69 (calibration), and 0.54 and 0.66 (validation), respectively. The SWAT model performed better than the IHACRES model by efficiently using the climatic database of NCEP CFSR center. The IHACRES model was also able to simulate the runoff of the watershed with a relatively high correlation with the observational data. It is possible to simulate and predict rainfall-runoff of the Dez watershed using the tested models for taking the measures, which may avoid natural phenomenon including flooding.

meteorology & atmospheric sciences
Groundwater Modeling Under Variable Operating Conditions Using SWAT, MODFLOW and MT3DMS: a Catchment Scale Approach to Water Resources Management

Majid Ehtiat,S. Jamshid Mousavi,Raghavan Srinivasan

DOI: https://doi.org/10.1007/s11269-017-1895-z

IF: 4.426

2018-01-09

Water Resources Management

Abstract:This paper presents an integrated modeling approach by linking soil and water application tool (SWAT), modular finite difference groundwater flow (MODFLOW) and modular 3-dimensional multi-species transport (MT3DMS) models capable of predicting a groundwater system response, in terms of flow and salt concentrations, to current and future development conditions. SWAT, a semi-distributed hydrologic model, estimates the spatio-temporal distribution of groundwater recharge rates. These rates are then input to MODFLOW using an interface module developed that maps the HRU-based spatial resolution of SWAT outflows into the cell-based spatial structure of inputs to MODFLOW and MT3DMS. The integrated SWAT-MODFLOW-MT3DMS model is used in modeling Dehloran aquifer system located in the arid western region of Iran, experiencing changes in land-use, irrigation system and pumping locations and loads. The results illustrate the significance of the developed integrated modeling tool in quantifying the impact of changes in land and surface water resources on its subsurface water system.

water resources,engineering, civil
Fields of Application of SWAT Hydrological Model—A Review

Josip Janjić,Lidija Tadić

DOI: https://doi.org/10.3390/earth4020018

2023-05-02

Earth

Abstract:Soil and Water Assessment Tool (SWAT) is a widely used model for runoff, non-point source pollution, and other complex hydrological processes under changing environments (groundwater flow, evapotranspiration, snow melting, etc.). This paper reviews the key characteristics and applications of SWAT. Since its inception in the 1990s, there has been a significant increase in the number of articles related to the SWAT model. In the last 10 years, the number of articles almost reached 4000. The range of applications varies between small and large scales; however, large watershed modelling dominates in North America and Asia. Moreover, the prevailing modelling is related to hydrological impacts in a changing environment, which is a global problem. The significant shortcoming of the SWAT model is the vast quantity of data necessary to run the model to generate accurate and reliable results, which is not accessible in some regions of the world. Apart from its accessibility, it has several advantages, including continuous development, which results in a slew of new interfaces and tools supporting the model. Additionally, it can simulate human activity and agricultural measures and adapt to new circumstances and situations. This article emphasizes weaknesses and strengths of SWAT model application on modelling of hydrological processes in changing climate and environment.
SWAT + input data preparation in a scripted workflow: SWATprepR

Svajunas Plunge,Brigitta Szabó,Michael Strauch,Natalja Čerkasova,Christoph Schürz,Mikołaj Piniewski

DOI: https://doi.org/10.1186/s12302-024-00873-1

2024-03-12

Environmental Sciences Europe

Abstract:Input data collection, quality assurance and preparation are central but time_consuming steps in environmental modeling. Errors due to manual processing of model input data can result in an incorrect representation of an environmental system and may consequently lead to implausible model simulations. Correct input data preparation and thorough quality check at an early stage of the model setup procedure are essential to build confidence in model simulation results. Typically, in environmental model applications, many steps in the input data preparation phase have to be repeated with the inflow of new, additional or corrected data. In this study, we selected the widely used SWAT + ecohydrological model as an illustrative example to investigate challenges related to input data preparation. To assist in these tasks, we developed an R package named SWATprepR, which provides functions for typical and repeating SWAT + model input data preparation tasks. The package supports the preparation of weather input files, atmospheric deposition, soil parameters, crop rotations, and observed (control or calibration) data, to name a few, presently with focus on European applications. The SWATprepR functions are integrated in R script workflows and can help SWAT + modelers to avoid repetitive tasks, secure reproducibility and transparently document the data processing steps. Application of the package is illustrated with a test case of a SWAT + model for a small catchment in central Poland.

environmental sciences
Simulation of water balance equation components using SWAT model in Samalqan Watershed (Iran)

Shima Nasiri,Hossein Ansari,Ali Naghi Ziaei

DOI: https://doi.org/10.1007/s12517-020-05366-y

2020-06-01

Arabian Journal of Geosciences

Abstract:The disparate temporal and local distribution of freshwater and the rapid growth of the population in recent decades have led to problems in providing water resources for various applications. Hence, the supply of water in many countries such as Iran has become one of the most important challenges of the present century. Modern mathematical models have been developed for studying the complex hydrological processes of a watershed. The application of conceptual hydrological models is an important issue in watersheds for researchers, especially in arid and semiarid regions. The hydrological behaviors are complicated in such watersheds, and their calibration is more difficult. In this research, the conceptual and semidistributed SWAT model is used for Samalqan watershed, Iran, with 1148 km2 area. Streamflow simulation is considered for 13 years. Samalqan watershed modeling led to 22 subbasins and 413 hydrologic response units. Water balance components have been computed, the results have been calibrated with the SUfI2 approach in the SWAT-CUP program, and finally, the performance of the model is evaluated The sensitivity analysis was conducted using 26 SWAT parameters. The most sensitive parameters were CN2 (moisture condition II curve number), GWQMN (threshold water level in shallow aquifer for base flow), GW_Delay (delay time for aquifer recharge), GW_REVAP (Revap coefficient), and ESCO (Soil evaporation compensation coefficient). The model was calibrated from 2004 to 2012 and validated from 2012 to 2014. The coefficient of determination (R2) and Nash and Sutcliffe efficiency (NSE), On monthly basis, were between 0.60–0.80 and 0.80–0.95 respectively, for calibration, and 0.70–0.90 and 0.70–0.80, respectively, for validation periods, which indicates that the model results are satisfactory. Results show that the SWAT model can be used efficiently in semiarid regions to support water management policies and development of sustainable water management strategies. Due to the arid and semiarid climate of Iran and water resources constraints, the need for modeling is clear. It can be concluded that determination of the existing water potential is necessary for water planning and management of water resources in the watershed.

geosciences, multidisciplinary
Evaluation of land use/land cover datasets in hydrological modelling using the SWAT model

Sayed Amir Alawi,Sevinç Özkul

DOI: https://doi.org/10.2166/h2oj.2023.062

2023-03-10

H2Open Journal

Abstract:Land use/land cover (LULC) is a key influencer for runoff generation and the estimation of evapotranspiration in the hydrology of watersheds. Therefore, it is essential to use accurate and reliable LULC data in hydrological modelling. Ground-based data deficiencies are a big challenge in most parts of developing countries and remote areas around the globe. The main objective of this research was to evaluate the accuracy of LULC data from two different sources in hydrological modelling using the soil and water assessment tool (SWAT). The first LULC data was prepared by the classification of Landsat 8 satellite imagery, and the second LULC data was extracted from the ESRI 2020 global LULC dataset. The study was conducted on the Kokcha Watershed, a mountainous basin partly covered by permanent snow and glaciers. The accuracy assessment was done based on a comparison between observed river discharge and simulated river flow, utilizing each LULC dataset separately. After calibration and validation of the models, the acquired result was approximately similar and slightly (5.5%) different. However, due to the higher resolution and easily accessible ESRI 2020 dataset, it is recommended to use ESRI 2020 in hydrological modelling using the SWAT model.
Calibration, validation and uncertainty analysis of a SWAT water quality model

Sushil K. Das,Amimul Ahsan,Md. Habibur Rahman Bejoy Khan,Abdullah Gokhan Yilmaz,Shakil Ahmed,Monzur Imteaz,Muhammad Atiq Ur Rehman Tariq,Md. Shafiquzzaman,Anne W. M. Ng,Nadhir Al-Ansari

DOI: https://doi.org/10.1007/s13201-024-02138-x

IF: 5.411

2024-03-29

Applied Water Science

Abstract:Abstract Sediment and nutrient pollution in water bodies is threatening human health and the ecosystem, due to rapid land use changes and improper agricultural practices. The impact of the nonpoint source pollution needs to be evaluated for the sustainable use of water resources. An ideal tool like the soil and water assessment tool (SWAT) can assess the impact of pollutant loads on the drainage area, which could be beneficial for developing a water quality management model. This study aims to evaluate the SWAT model’s multi-objective and multivariable calibration, validation, and uncertainty analysis at three different sites of the Yarra River drainage area in Victoria, Australia. The drainage area is split into 51 subdrainage areas in the SWAT model. The model is calibrated and validated for streamflow from 1990 to 2008 and sediment and nutrients from 1998 to 2008. The results show that most of the monthly and annual calibration and validation for streamflow, nutrients, and sediment at the three selected sites are found with Nash–Sutcliffe efficiency values greater than 0.50. Furthermore, the uncertainty analysis of the model shows satisfactory results where the p-factor value is reliable by considering 95% prediction uncertainty and the d-factor value is close to zero. The model's results indicate that the model performs well in the river's watershed, which helps construct a water quality management model. Finally, the model application in the cost-effective management of water quality might reduce pollution in water bodies due to land use and agricultural activities, which would be beneficial to water management managers.

water resources
Global soil, landuse, evapotranspiration, historical and future weather databases for SWAT Applications

K. C. Abbaspour,S. Ashraf Vaghefi,H. Yang,R. Srinivasan

DOI: https://doi.org/10.1038/s41597-019-0282-4

2019-11-06

Scientific Data

Abstract:Abstract Large-scale distributed watershed models are data-intensive, and preparing them consumes most of the research resources. We prepared high-resolution global databases of soil, landuse, actual evapotranspiration (AET), and historical and future weather databases that could serve as standard inputs in Soil and Water Assessment Tool (SWAT) models. The data include two global soil maps and their associated databases calculated with a large number of pedotransfer functions, two landuse maps and their correspondence with SWAT’s database, historical and future daily temperature and precipitation data from five IPCC models with four scenarios; and finally, global monthly AET data. Weather data are 0.5° global grids text-formatted for direct use in SWAT models. The AET data is formatted for use in SWAT-CUP (SWAT Calibration Uncertainty Procedures) for calibration of SWAT models. The use of these global databases for SWAT models can speed up the model building by 75–80% and are extremely valuable in areas with limited or no physical data. Furthermore, they can facilitate the comparison of model results in different parts of the world.

multidisciplinary sciences
Quantification of the Effect of Soil and Biophysical Parameters on Water Balance Modelling Using SWAT+ in Forested Catchments

Ehsan Qasemipour,Markus Pahlow,Thomas A. Cochrane,Clemens Altaner

DOI: https://doi.org/10.1002/hyp.15332

IF: 3.784

2024-11-13

Hydrological Processes

Abstract:Soil profile depth and texture features strongly impact water balance modelling results. Changes in water fluxes are more pronounced for low rainfall scenarios. Water balance is more sensitive to LAI parameters than to other biophysical parameters. Soil information at depths beyond those currently available in soil databases is required to improve model reliability. Revision of the SWAT+ representation of the rooting system is recommended. Accurate simulation of water balance components is crucial for effective water and land management practices. The performance of process‐based hydrological models relies on the accurate determination of input variables. The objective of this study is to quantify the magnitude of the effect of soil properties (depth and texture) and biophysical parameters on water balance simulation for a forested catchment using the Soil and Water Assessment Tool (SWAT+). Simulations were carried out for a baseline scenario using the default soil inputs, followed by extending the soil profile depth up to 15 m under three different rainfall scenarios. Sensitivity analysis of model outputs was performed using the SENSitivity ANalysis (SENSAN) programme of the Parameter ESTimation (PEST) suite, coupled with SWAT+. The results showed that increasing soil profile depth to 15 m led to around 50% increase in water yield, and around 20% reduction in percolation with slight variations across the three rainfall scenarios. Evapotranspiration rates were slightly increased in deeper soil profiles. The sensitivity of evapotranspiration, surface runoff, and percolation to LAI‐related biophysical parameters was pronounced, highlighting the need to include such parameters in SWAT+ model calibration. The water uptake from deeper soil layers by deep roots, even in rocky substrates, as documented in the literature, is not adequately captured by the SWAT+ model. Our work showed that in general, developing local soil databases with detailed information on deeper layers is needed, to improve the accuracy and reliability of hydrological models in predicting water fluxes, thereby supporting informed water resources management decisions.

water resources
Investigation of meteorological variables on runoff archetypal using SWAT: basic concepts and fundamentals

Kaveh Ostad-Ali-Askari

DOI: https://doi.org/10.1007/s13201-022-01701-8

IF: 5.411

2022-06-14

Applied Water Science

Abstract:Abstract Hydro-climatic excesses, for example humid and overflows, have most probable enlarged owing to climatically alteration and could due to simple effects on socio-financial, organizational and ecological areas. It was premeditated greatest hydraulic plans, for example barricades, it was distinct the excess of the streams. If the stream presences any situation to quantity the profit, the hydraulic mockups can be used to guesstimate it. SWAT is widely-used high-tech mockups. This investigation contemplates the understanding of the excess approximation for streams, by the SWAT prototypical; depend on changes in such meteorological parameters as rainfall, cosmological energy, airstream, moisture and temperature. The gained significances require that by 30.46% decay in the normal scheduled rainfall, brightness, qualified moisture, airstream and temperature, it was usual ermined 64.73% decay, 115.14% rise, 45.99% decrease, 126.58% rise and 40.15% rise in exhibited excess, independently. The wind speed and the solar energy are the most sensitive and temperature is the smallest penetrating parameters in the overflow approximation. These consequences signify “acceptable” and “very good” performances for discharge. While there is still some quantity of ambiguity, the practice of balancing information, for example soil dampness, to adjust and confirm the SWAT model package prototypical is beneficial, particularly when discharge information is infrequent, as for some watersheds in the humid region. Evaluation of the water usage efficacy is the important to efficiently accomplish agronomic water resource.

water resources
Development of Strategy for SWAT Hydrologic Modeling in Data-Scarce Regions of Peru

Fariborz Daneshvar,Jane R. Frankenberger,Laura C. Bowling,Keith A. Cherkauer,Andre G. de Lima Moraes

DOI: https://doi.org/10.1061/(ASCE)HE.1943-5584.0002086

2021-05-13

Abstract:In this study, methods were developed to create and evaluate the performance of the Soil and Water Assessment Tool (SWAT) in southern Peru where commonly used input data sources were not available. Soil classes were defined based on regional soil taxonomy and suitability maps combined with soil profiles. Local land cover and remotely sensed satellite data were used to develop a land cover database. Water balance analysis of the reservoir as well as satellite evapotranspiration data were used for model performance assessment. Results showed that these strategies provided reliable predictions of hydrology in this region, with the uncertainty quantified based on the range of inputs. Overall, this semiarid watershed was base flow driven and average annual surface runoff contribution to streamflow was less than 9%. Assessment of water pathways and their uncertainties based on the uncertainty of estimated inputs also showed that 62% of precipitation was removed by evapotranspiration with up to 16% uncertainty. The methods introduced in this study can be applied to other data-scarce watersheds, and findings provide insights on the hydrology of the Peruvian Andes region.
SWAT model applications: From hydrological processes to ecosystem services

Jie Zhao,Ning Zhang,Zhuochen Liu,Qing Zhang,Chengwei Shang

DOI: https://doi.org/10.1016/j.scitotenv.2024.172605

IF: 9.8

2024-05-09

The Science of The Total Environment

Abstract:Ecosystem services in bolstering human well-being and steering environmental management garnered increasing recognition. In this realm, the Soil and Water Assessment Tool (SWAT) rose as an instrumental tool in ecosystem services. The heterogeneous applications of SWAT across diverse studies underscore an imperative for bibliometric analysis to decipher these evolving trends. This study endeavors to execute a comprehensive analysis of SWAT's application for ecosystem services, delineating key thematic development and exploring its utilization in ecosystem services. We conducted a comprehensive literature review by searching the Web of Science database, retrieving a total of 534 articles. The CiteSpace facilitated our co-citation analysis, enabling the identification of seminal publications and burgeoning themes within SWAT. Our analysis delineated thematic development in SWAT pertaining to ecosystem services. Initially concentrated on hydrological processes, the focus progressively broadened to encompass comprehensive ecosystem services evaluations. We examined 81 peer-reviewed publications directly related to ecosystem services, and most of them addressed certain ecosystem services, such as water yield, soil retention, regulation of water flow, food, and carbon storage. SWAT holds a unique advantage in quantifying water-related processes. Future studies should focus more on ecosystem service flows based on SWAT, which contributes to elucidating the relationship between nature and humans, facilitating comprehensive ecosystem management.

environmental sciences
Estimation of landscape pattern change on stream flow using SWAT-VRR

Wei Chong,Zhang Lin-Jing,Wu Qing,Cao Lian-Hai,Zhang Lu,Yao Lun-Guang,Zhu Yun-Xian,Yang Feng

DOI: https://doi.org/10.1080/22797254.2020.1790994

IF: 4

2020-07-13

European Journal of Remote Sensing

Abstract:With the development of landscape ecology and hydrology, the research in relationship between landscape pattern changes and hydrological process is pushed into a further level, and also to proposed a higher request to the development of related models. The SWAT-VRR model (Soil and Water Assessment Tool with Vegetation Runoff Regulation) is a distributed hydrological model to better show the effect of land use landscape change on hydrological processes. The Qihe watershed in Danjiangkou reservoir area was selected in a case study, and the applicability of SWAT-VRR was verified firstly, then set up two typical water-soil conservation scenario simulations to analyze the response to landscape pattern changes under SWAT-VRR. The results indicate that, the SWAT-VRR model achieved a notable improvement in monthly and daily hydrological simulation comparing to the SWAT model (Soil and Water Assessment Tool) simulation during 2003 to 2006. Compared with the two land use scenarios, the 300 m forest riparian along the Qihe River can adjust the runoff more effectively than the area greater than 15° is forest, and show a strong stability in water-soil conservation effect during different rainfall. The SWAT-VRR provides a more accurate scientific basis to estimate landscape pattern change on stream flow.

remote sensing
Assessing current and future available resources to supply urban water demands using a high-resolution SWAT model coupled with recurrent neural networks and validated through the SIMPA model in karstic Mediterranean environments

Antonio Jodar-Abellan,Miguel Ángel Pardo,Seyed Babak Haji Seyed Asadollah,Ryan T Bailey

DOI: https://doi.org/10.1007/s11356-024-34404-5

Abstract:Hydrological simulation in karstic areas is a hard task due to the intrinsic intricacy of these environments and the common lack of data related to their geometry. Hydrological dynamics of karstic sites in Mediterranean semiarid regions are difficult to be modelled mathematically owing to the existence of short wet episodes and long dry periods. In this paper, the suitability of an open-source SWAT method was checked to estimate the comportment of a karstic catchment in a Mediterranean semiarid domain (southeast of Spain), which wet and dry periods were evaluated using box-whisker plots and self-developed wavelet test. A novel expression of the Nash-Sutcliffe index for arid areas (ANSE) was considered through the calibration and validation of SWAT. Both steps were completed with 20- and 10-year discharge records of stream (1996-2015 to calibrate the model as this period depicts minimum gaps and 1985-1995 to validate it). Further, SWAT assessments were made with records of groundwater discharge and relating SWAT outputs with the SIMPA method, the Spain's national hydrological tool. These methods, along with recurrent neural network algorithms, were utilised to examine current and predicted water resources available to supply urban demands considering also groundwater abstractions from aquifers and the related exploitation index. According to the results, SWAT achieved a "very good" statistical performance (with ANSE of 0.96 and 0.78 in calibration and validation). Spatial distributions of the main hydrological processes, as surface runoff, evapotranspiration and aquifer recharge, were studied with SWAT and SIMPA obtaining similar results over the period with registers (1980-2016). During this period, the decreasing trend of rainfalls, characterised by short wet periods and long dry periods, has generated a progressive reduction of groundwater recharge. According to algorithms prediction (until 2050), this declining trend will continue reducing groundwater available to meet urban demands and increasing the exploitation index of aquifers. These results offer valuable information to authorities for assessing water accessibility and to provide water demands in karstic areas.
Improving the Applicability of the SWAT Model to Simulate Flow and Nitrate Dynamics in a Flat Data-Scarce Agricultural Region in the Mediterranean

Cenk Donmez,Omer Sari,Suha Berberoglu,Ahmet Cilek,Onur Satir,Martin Volk

DOI: https://doi.org/10.3390/w12123479

IF: 3.53

2020-12-10

Water

Abstract:Understanding the soil and hydrologic processes in agricultural watersheds are vital for reliable assessments of water quantity and quality to support integrated river basin management. However, deriving hydrology-relevant information is complicated in flat data-scarce agricultural watersheds due to constraints in watershed delineation, flat topography, poor natural drainage, and irregular irrigation schedules by human intervention. The study aimed to improve the applicability of the Soil and Water Assessment Tool (SWAT) model to simulate daily flow and NO3 concentrations in a flat data-scarce agricultural watershed in the Lower Seyhan Plain (LSP) in Turkey. Refined digitized stream networks, discharge data derived from fully equipped gauging stations, and satellite data (Landsat 7 ETM+, Aster GDEM, etc.) had to be integrated into the modeling process to improve the simulation quality. The model was calibrated using a 2-year (2011–2012) dataset of streamflow and NO3 using the Sequential Uncertainty Fitting (SUFI-2) approach and validated from 2013 to 2018. Daily water yields were predicted with a reasonable simulation accuracy (E values ranging from 0.53 to 0.82 and percent bias (PBIAS) from 0 to +4.1). The results proved that integrating redefined stream networks to SWAT within a Geographic Information System (GIS) environment increases the simulation capability of flow and nitrate dynamics efficiently. Automated delineation of these networks and sub-basins at low topographic transitions limits the SWAT accuracy.

environmental sciences,water resources
Application of SWAT to assess peatland forestry impacts on water quality

Joy Bhattacharjee,Hannu Marttila,Eugenio Molina Navarro,Bjørn Kløve

DOI: https://doi.org/10.2166/nh.2024.049

2024-10-24

Hydrology Research

Abstract:Peatland drainage can affect the natural state of hydrological conditions and nutrient loading but is rarely included in catchment-scale models. To understand the gap, we aimed to use the soil and water assessment tool (SWAT) model to observe drained peatlands and their properties to predict nutrients and suspended solids (SS) in the peatland-dominated Simojoki catchment. We integrated drainage networks in SWAT to (i) identify the parameters for the drainage; (ii) determine annual loads and mean concentrations of SS, organic phosphorus (Org-P), total phosphorus (TP), organic nitrogen (Org-N), and total nitrogen (TN); (iii) understand spatial variation of nutrients and SS; and (iv) investigate the uncertainty ranges for the estimates. The calibrated SWAT model showed a 9.6% PBIAS between the simulated flow and the observations with low to medium loading variations for the water quality parameters. For Org-N and TN, the highest loading per year was at the downstream outlet, whereas for SS, Org-P, and TP, it was higher at the upstream outlet of the catchment. This approach of representing the drained peatland in SWAT indicated a maximum spatial distributed load in the peat soil in the clear-cut area and it can be beneficial in future hydrological modelling efforts in identifying the status of nutrients or SS.

water resources
Enhancing SWAT model with modified method to improve Eco-hydrological simulation in arid region

Yunfei Cai,Fei Zhang,Jingchao Shi,Verner Carl Johnson,Zia Ahmed,Jianguo Wang,Weiwei Wang

DOI: https://doi.org/10.1016/j.jclepro.2023.136891

IF: 11.1

2023-03-24

Journal of Cleaner Production

Abstract:The Soil and Water Assessment Tool (SWAT) model is diffusely applied to areas with uniform precipitation distribution and gentle slopes. However, the SWAT has apparent defects in the process of ecohydrological simulation in mid-high latitudes and arid regions. This model can merely be used in agricultural catchments with gentle slopes and uniform rainfall, and the simulation is not suitable for high-altitude alpine catchment. To this point, this paper makes appropriate improvements to the runoff module, and specifically corrects the key sensitive parameters. The global sensitivity and performance assessment of the model's parameters were carried out before and after the improvement using the monthly data of runoff and evaporation from 1990 to 2018 in the Kaidu River basin in northwestern China. It is indicated that the Modified SWAT simulates the performance of monthly runoff and evapotranspiration better than the original SWAT, which overestimates the runoff volume throughout hydrological changes in different periods. Compared with the monthly water production under different land use/cover conditions, the highest water production was found in forest and grassland. By modifying the SWAT algorithm, the structural non-determinacy of the Modified SWAT is significantly reduced, and the adaptability of the model is improved. Thus, the Modified SWAT shows a better simulation performance in arid areas with considerable terrain variation and scarce rainfall data.

environmental sciences,green & sustainable science & technology,engineering, environmental
Hydrological modeling using the SWAT Model in urban and peri-urban environments: The case of Kifissos experimental sub-basin (Athens, Greece)

Evgenia Koltsida,Nikos Mamassis,Andreas Kallioras

DOI: https://doi.org/10.5194/hess-2021-482

2021-10-06

Abstract:Abstract. SWAT (Soil and Water Assessment Tool) is a continuous time, semi-distributed river basin model that has been widely used to evaluate the effects of alternative management decisions on water resources. This study, demonstrates the application of SWAT model for streamflow simulation in an experimental basin with daily and hourly rainfall observations to investigate the influence of rainfall resolution on model performance. The model was calibrated for 2018 and validated for 2019 using the SUFI-2 algorithm in the SWAT-CUP program. Daily surface runoff was estimated using the Curve Number method and hourly surface runoff was estimated using the Green and Ampt Mein Larson method. A sensitivity analysis conducted in this study showed that the parameters related to groundwater flow were more sensitive for daily time intervals and channel routing parameters were more influential for hourly time intervals. Model performance statistics and graphical techniques indicated that the daily model performed better than the sub-daily model. The Curve Number method produced higher discharge peaks than the Green and Ampt Mein Larson method and estimated better the observed values. Overall, the general agreement between observations and simulations in both models suggests that the SWAT model appears to be a reliable tool to predict discharge over long periods of time.

Soil and water assessment tool model for runoff reaction to land use variations by SWAT model package

Application of SWAT model and SWAT-CUP software in simulation and analysis of sediment uncertainty in arid and semi-arid watersheds (case study: the Zoshk–Abardeh watershed)

Hydrological simulation and evaluation of drought conditions in the ungauged watershed Parishan lake Iran, using the SWAT model

SWAT and IHACRES models for the simulation of rainfall-runoff of Dez watershed

Groundwater Modeling Under Variable Operating Conditions Using SWAT, MODFLOW and MT3DMS: a Catchment Scale Approach to Water Resources Management

Fields of Application of SWAT Hydrological Model—A Review

SWAT + input data preparation in a scripted workflow: SWATprepR

Simulation of water balance equation components using SWAT model in Samalqan Watershed (Iran)

Evaluation of land use/land cover datasets in hydrological modelling using the SWAT model

Calibration, validation and uncertainty analysis of a SWAT water quality model

Global soil, landuse, evapotranspiration, historical and future weather databases for SWAT Applications

Quantification of the Effect of Soil and Biophysical Parameters on Water Balance Modelling Using SWAT+ in Forested Catchments

Investigation of meteorological variables on runoff archetypal using SWAT: basic concepts and fundamentals

Development of Strategy for SWAT Hydrologic Modeling in Data-Scarce Regions of Peru

SWAT model applications: From hydrological processes to ecosystem services

Estimation of landscape pattern change on stream flow using SWAT-VRR

Assessing current and future available resources to supply urban water demands using a high-resolution SWAT model coupled with recurrent neural networks and validated through the SIMPA model in karstic Mediterranean environments

Improving the Applicability of the SWAT Model to Simulate Flow and Nitrate Dynamics in a Flat Data-Scarce Agricultural Region in the Mediterranean

Application of SWAT to assess peatland forestry impacts on water quality

Enhancing SWAT model with modified method to improve Eco-hydrological simulation in arid region

Hydrological modeling using the SWAT Model in urban and peri-urban environments: The case of Kifissos experimental sub-basin (Athens, Greece)