Abstract:Problem statement. In the production of corrosion-resistant pipes at pipe-pressing plants, the low durability of the pipe tool is a burning issue. High mechanical properties of the tool and its heat resistance (redness resistance) are achieved due to alloying and heat treatment. However, the “traditional” means of increasing wear resistance (hardening with tempering, thermomechanical processing) are almost exhausted. Therefore it is of some interest to develop and correct thermal and chemical-thermal treatment methods in order to increase the wear resistance of the tool. Chemical and thermal treatment is an effective way of changing the surface layer composition for a stamping tool to provide the necessary set of properties for its working surface. This changes the structure and properties of the surface layer and increases the strength, wear and heat resistance of the steel through the formation of carbides, nitrides, borides, etc. that are stable during heating process. Conducting carbonitridation in melts of cyanate salts and carbonates for matrix rings of complex matrices and mandrel needles for pressing pipes on pipe profile presses significantly increases the durability of the tool due to high indicators of surface hardness, fatigue strength by 50...60 % due to the creation of compressive stresses on the surface; improves the surface quality of the tool itself and, as a result, the quality of corrosion-resistant pipes inner surface. Ionic nitriding (compared to furnace nitriding) has the following advantages: it accelerates diffusion processes by 1,5−2 times; allows to get a diffusion layer of adjustable composition and structure; characterized by slight deformations of products and a high class of surface cleanliness. The purpose of the article – to show the expediency of using modern chemical-thermal treatment technologies (carbonitridation, ionic nitriding), which increase the hardness and wear resistance of the tool, which ensures the quality of corrosion-resistant pipes inner surface and reduces the costs of processing the pipes manufacture, as well as the effectiveness of building a mathematical model of the distribution of microhardness in surface layers of the tool after chemical and thermal treatment with the help of applied computer programs “MathCad”, “Excel”. Conclusions. Due to the low durability of the pipe press tool, there was a need to improve the strengthening technologies of the pipe tool, optimize the modes of such technologies, and develop new strengthening methods. Conducting chemical-thermal treatment after hardening and tempering of tool steel Х40CrMoV5-1-1and 30WCrV17-2 (carbonitridation, ion nitriding) significantly increases the operational properties of the tool and its service life by 25...30 %, as well as the quality of its surface, which significantly increases the quality of corrosion-resistant pipes inner surface.

Development of Technology and Equipment for Non-destructive Testing of Defects in Sewing Mandrels of a Three-roll Screw Mill 30-80

Study of mandrel wear during billet piercing on the MISiS-130D screw rolling mill

Computer-aided and experimental study of temperature effect on the quality indicators of piercing mandrels when rolling steel 50 vessels on a screw-rolling mill 30–80. part 1

Comparative analysis of methods for improving the quality of hardened pipe and bar stock for agricultural machinery parts

Upgrade of the mechatronic rolls positioning system of the piercing mill

Modeling the Evolution of Casting Defect Closure in Ingots through Radial Shear Rolling Processing

Experimental testing of a new helical rolling technology

The rolling simulation for cold work metal hardening

Technology Optimization Analysis of Three-Roll Rotary Piercing Process for Seamless Steel Pipe

Development of multipass skew rolling technology for stainless steel and alloy pipes’ production

A study of conditions of surface defects formation when bar rolling at a bar and wire mill and methods of their elimination

STRENGTHENING OF PIPE-PRESSING TOOLS FOR THE PRODUCTION OF CORROSION-RESISTANT PIPES USING CHEMICAL AND THERMAL TREATMENT

A novel method for competitive failure behavior and mechanical degradation online monitoring of laser additive work roll under multidimensional damage

Modelling of the Rolling Process of Titanium Alloy Tube Billets in Laboratory Conditions on a RSP 14-40 Rolling Mill

IMPROVEMENT OF CALIBRATION OF CONE-SHAPED ROLLS OF THE PIERCING MILL OF THE PIPE-ROLLING SHOP

CURRENT STATUS AND DEVELOPMENT PROSPECTS OF NANOSTRUCTURING OF DEFORMED METALS AND ALLOYS AND SPRAYED COATINGS

Identification of structural defects and their impact on the magnetic memory, static and cyclic strength of VNS9-SH thin sheet trip-steel

Development of Advanced Technologies for the Production of Innovative Materials with a Submicrocrystalline Structure by Methods of Severe Plastic Deformation

Hypothesis of the nature of cross-sectional shape distortion of the cold-pilgering mill die groove during dry pipe rolling

Improvement of tool calibration in cold pilligrim rolling mill

Influence of Roll Rotational Speed on inside Bore and Lamination Defects in Rotary Piercing Large Diameter Heavy Wall P92 Steel Pipe Process