Abstract:Although monoclinic WO3 is widely studied as a prototypical photoanode material for solar water splitting, limited success, hitherto, in fabricating WO3 photoanodes that simultaneously demonstrate high efficiency and reproducibility has been realized. The difficulty in controlling both the efficiency and reproducibility is derived from the ever-changing structures/compositions and chemical environments of the precursors, such as peroxytungstic acid and freshly prepared tungstic acid, which render the fabrication processes of the WO3 photoanodes particularly uncontrollable. Herein, a highly reproducible sol-gel process was developed to establish efficient and translucent WO3 photoanodes using a chemically stable ammonium metatungstate precursor. Under standard simulated sunlight of air mass 1.5 G, 100 mW cm−2, the WO3 photoanode delivered photocurrent densities of ca. 2.05 and 2.25 mA cm−2 at 1.23 V versus the reversible hydrogen electrode (RHE), when tested in 1 mol L−1 H2SO4 and CH3SO3H, respectively. Hence, the WO3 photoanodes fabricated herein are one of the WO3 photoanodes with the highest performance ever reported. The reproducibility of the fabrication scheme was evaluated by testing 50 randomly selected WO3 samples in 1 mol L−1 H2SO4, which yielded an average photocurrent density of 1.8 mA cm−2 at 1.23 VRHE with a small standard deviation. Additionally, the effectiveness of the ammonium metatungstate precursor solution was maintained for at least 3 weeks, when compared with the associated upper-limit values of peroxytungstic and tungstic acid based precursors after 3 d. This study presents a key step to the future development of WO3 photoanodes for efficient solar water splitting.

Controlled Growth of WO3 Photoanode under Various pH Conditions for Efficient Photoelectrochemical Performance

Regulation of morphology and visible light-driven photocatalysis of WO3 nanostructures by changing pH

Tuning the Photoelectronic and Photocatalytic Properties of Single-Crystalline TiO 2 Nanosheet Array Films with Dominant {001} Facets by Controlling the Hydrochloric Acid Concentration

Preparation and characterization of a novel WO_3/W photoanode

Efficient WO3−x nanoplates photoanode based on bidentate hydrogen bonds and thermal reduction of ethylene glycol

Thermomechanical and Structural Analysis of WO 3 Array for Optimized Photoelectrochemical Chloride Oxidation Performance

Effect of acid treatment on boosting the photoelectrochemical performance of doped and codoped α-Fe2O3 photoanodes

Sol-gel Synthesis of Highly Reproducible WO3 Photoanodes for Solar Water Oxidation

Controllable Synthesis of N2-Intercalated WO3 Nanorod Photoanode Harvesting a Wide Range of Visible Light for Photoelectrochemical Water Oxidation

The Photoelectrochemical Response of PbCrO4 Thin Film Fabricated Using Pechini Method: The Effect of Nitrate Decomposition in Precursor Solution

New aspects of improving the performance of WO3 thin films for photoelectrochemical water splitting by tuning the ultrathin depletion region

Electrochemical Synthesis of Tungsten Oxide in Chloride Solutions for Environmental Photocatalysis

Manipulating metal-oxygen local atomic structures in single-junctional p-Si/WO3 photocathodes for efficient solar hydrogen generation

Large-Scale Tunable 3D Self-Supporting WO3 Micro-Nano Architectures As Direct Photoanodes for Efficient Photoelectrochemical Water Splitting.

Nanostructured porous WO 3 for photoelectrochemical splitting of seawater

Structure Design and Performance Research of WO 3 Hydrogen Gasochromic Film Prepared by Solvothermal Synthesis Assisted with Electrodeposition of Seed Layer

Facile Synthesis of a Micro–Nano-Structured FeOOH/BiVO4/WO3 Photoanode with Enhanced Photoelectrochemical Performance

Preparation of Vertically Aligned WO3 Nanoplate Array Films Based on Peroxotungstate Reduction Reaction and Their Excellent Photoelectrocatalytic Performance

Preparation of well-aligned WO 3 nanoflake arrays vertically grown on tungsten substrate as photoanode for photoelectrochemical water splitting

Enhancement of electrochromic properties using nanostructured amorphous tungsten trioxide thin films

Effect of pH on the structure and morphology of W18O49 nanowires and their electrochromic properties