Abstract:The EXEJET project is a large-scale jet noise collaborative program by Snecma, Onera and Airbus. In this framework, an exhaustive experimental database has been collected on a realistic dual-jet stream mounted around a central plug. The high-bypass ratio jet is operated at approach conditions in the CEPRA19 anechoic wind-tunnel. In the present paper, several Large-Eddy Simulations (LES) have been performed on the EXEJET baseline configuration using the unstructured flow solver AVBP developped at Cerfacs. The nozzle inlet boundary conditions are obtained by performing RANS simulations until the nozzle exit total pressure conditions match the experimental pressure probe survey. Three LES simulations have been performed following the numerical strategy developped by the present authors, the first one with a fully tetrahedral mesh, the second one uses a hybrid mesh including prismatic layers to better resolve the boundary layer development in the nozzles and finally, a finer mesh including an original tripping method near the fan jet exit to trigger the laminar to turbulent transition of the external mixing layer. The boundary layers developping in the nozzles have a major influence on the turbulent jet streams mixing. The mean velocity magnitude and turbulent kinetic energy evolution along the jet from the PIV measurements are well captured with the three simulations but a better agreement is obtained with the finer hybrid tripped simulation. The acoustic predictions obtained using a Ffowcs William and Hawking’s analogy are in good agreement with the experimental measurements especially at 30◦ degree in the downstream direction. The successive meshes tested bring similar acoustic results in the low and middle frequency ranges. The hybrid meshes recover the proper high-frequency decay of the sound levels and the cut-off frequency is increased with the mesh refeinement. Preliminary beamforming results have identified two main noise sources upstream and downstream the core-jet collapse.

Jet Noise Prediction Benchmark for Landing and Takeoff Noise of Supersonic Aircraft

Survey of Semi-Empirical Jet Noise Models for Preliminary Aircraft Engine Design

Experimental Investigation on Supersonic Jet Screech Tones

Experimental Investigation on Supersonic Jet Noise

Validation of an Integrated Simulation Model for Aircraft Noise and Engine Emissions

Noise Prediction Research of a Scaled Turboprop Aircraft

Comparison of different noise sources for the simulative cabin noise assessment of an electrically propelled regional aircraft

Reduced-Order Model for Supersonic Transport Takeoff Noise Scaling with Cruise Mach Number

Noise Reduction for a High-Speed Jet of an SST Engine Based on Acoustic Test Results for a Rectangular Nozzle in the TsAGI AC-2 Anechoic Chamber

Aircraft Structure’s Response Prediction Analysis and Experimental Study in High-strength Broadband Noise Environments

Prediction of Aircraft Surface Noise During Maneuvering Flight

Evaluation of Sonic Boom Shock Wave Generation with CFD Methods

Experimental validation of the hybrid scattering model of installed jet noise

Multiple Pure Tone Noise Prediction and Comparison with Static Engine Test Measurements

Simultaneous Noise and Performance Measurements for High-Speed Jet Noise Reduction Technologies

Nektar++: Development of the Compressible Flow Solver for Jet Aeroacoustics

Unstructured LES of the Baseline EXEJET Dual-Stream Jet

Prediction of Aircraft Surface Noise in Supersonic Cruise State

Retrofit Measures for Aircraft Noise Reduction: Simulation Benchmark and Impact Assessment

Progress and prospect on jet noise study

Numerical Analysis and Measurement Techniques for Aircraft Cabin Noise Using JAXA's Jet-FTB "HISHO"