Abstract:The separation of Li+ from Mg2+ in salt-lake brines using nanofiltration (NF) has become the most popular solution to meet the rising demand for lithium, particularly driven by the extensive use of lithium-ion batteries. This study presents the fabrication of a uniquely designed polyamide (PA) thin-film nanocomposite (TFN) membranes with ultrahigh Li+/Mg2+ selectivity and enhanced water flux by covalently incorporating mixed ligands functionalized silica nanoparticles (F-SiO2NPs) into the selective PA layer and covalently bonding them to the membrane surface. In this strategy, bare silica nanoparticles (SiO2NPs) were functionalized with mixed superhydrophilic ligands, including primary amine and quaternary ammonium groups, resulting in a highly positive surface charge primarily from the quaternary ammonium groups and enabling covalent conjugation via amine groups. Among the F-SiO2NP-incorporated membranes, M500 containing 500 ppm of F-SiO2NPs exhibited the best performance. In a solution with 2000 ppm salt concentration (Li+/Mg2+ ratio of 1:20), the M500 membrane showed an improved Li+/Mg2+ selectivity of 7.41 compared to the nonmodified TFC membrane, which had a selectivity of 5.05. Further surface conjugation of the M500 sample with 1500 ppm of F-SiO2NPs resulted in the C1500 membrane, demonstrating the best performance among all of the surface-modified membranes. C1500 showed an outstanding Li+/Mg2+ selectivity of 37.95, with a Mg2+ rejection of 95.7% and a Li+ rejection of -63.2%, and a water flux of 56.0 L m-2 h-1 at 70 psi. Notably, a 7.5-fold improvement in Li+/Mg2+ selectivity over the TFC membrane was achieved without compromising the water flux. This is evident from the nearly identical water flux values of the TFC, M500, and C1500 membranes, which were 57.1, 54.8, and 56.0 L m-2 h-1, respectively. Considering key factors for large-scale applications, such as cost-effectiveness, environmental impact, the abundance of synthetic precursors, and the maturity of synthesis and tailoring technologies, SiO2NP-based modifications outperform all other reported approaches to date.

Liquid membrane coupled electrodialysis system for highly-efficient lithium recovery from fly ash acid leaching solution

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Selective recovery of lithium from high-aluminum fly ash by using alkali-dissolution-assisted HBTA–TOPO synergistic extraction

Lithium Recovery from an Alumina Electrolysis Slag Leaching Solution with Strong Acidity: Separation of Lithium-Ion and Production of Battery Grade Lithium Carbonate

High-performance ionic liquid-based membranes employed for efficient recovery of lithium

Selective Lithium separation from Li/Co/Ni mixtures using optimized flow-electrode capacitive deionization

Flexible LATP composite membrane for lithium extraction from seawater via an electrochemical route

Efficient Lithium Recovery from Water Using Polyamide Thin-Film Nanocomposite (TFN) Membrane Modified with Positively Charged Silica Nanoparticles

Extracting Lithium from Low Concentration Solutions for Direct Battery Cathode Production

Preferential Recovery of Rare-Earth Elements from Coal Fly Ash Using a Recyclable Ionic Liquid

Selective separation of lithium from the hydrochloric acid leachate of lithium ores via the extraction system containing TBP-FeCl 3

Electrochemical lithium recovery from brine with high Mg2+/Li+ ratio using mesoporous λ-MnO2/LiMn2O4 modified 3D graphite felt electrodes

Lithium extraction from salt lake brine by four-stage ion-distillation of flow electrode capacitive deionization

Energy-efficient leaching process for preparation of aluminum sulfate and synergistic extraction of Li and Ga from circulating fluidized bed fly ash

A Two-Stage Process of Alkali Fusion and Organic Acid Leaching for Recovery of Critical Elements from Coal Fly Ash

Tailorable metal–organic framework based thin film nanocomposite membrane for lithium recovery from wasted batteries

Recovery of lithium resources from salt lake brines using a novel low dissolution loss extractant of DEHEHP with FeCl 3

Membrane-free Electrochemical Extraction of Lithium from Geothermal Water with Transition Metal Ferrocyanide As a Counter Electrode

Three-chamber electrochemical reactor for selective lithium extraction from brine.

Recovery of lithium salt from spent lithium‐ion battery by less polar solvent wash and water extraction

Advanced Lithium Extraction Membranes Derived from Tagged-Modification of Polyamide Networks