Abstract:Black appearance and flat absorber, i.e., high solar absorptance (α s ) and high IR emittance (ε ir ) surfaces, are essential for optical benches and optical mounts in astronomical and scientific payloads/spacecraft. Generally, these optical benches and optical mounts are fabricated by Ti6Al4V alloy due to its superior mechanical and thermal properties. However, bare Ti6Al4V is restricted for spacecraft thermal control applications due to its low emittance, intermediate absorptance, and moderate corrosion resistance behaviors. Hence, plasma electrolytic oxidation (PEO) technique was utilized to develop black and flat absorber coatings on bare Ti6Al4V alloy. Sodium silicate (SS), sodium hypophosphate (SHP), and potassium fluoride (KF) were used for the preparation of the electrolytic bath. Process parameters such as current density, duty cycle, frequency, the concentration of electrolytes, and duration were judiciously altered to get uniform PEO coatings with the flat absorbing property. Six numbers of PEO coatings were finally chosen for further in-depth characterizations as they showed adequate flat absorbing property. The phase composition, microstructure, roughness, and wettability of those PEO coatings were thoroughly studied by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), profilometry, and water contact angle measuring techniques, respectively. Thermo-optical properties viz., ε ir and α s of the coatings were recorded by portable IR emissometer and solar reflectometer, respectively, and electrical sheet resistance was measured by two probe method. The Nanomechanical properties of the coatings, such as modulus (E) and nanohardness (H), were evaluated by the nanoindentation technique. The PEO coatings were also investigated with respect to potentiodynamic polarization to investigate corrosion resistance of the PEO coatings. The highest ε ir value of PEO coating was achieved as 0.87 for a 20% duty cycle with a combination of SS + SHP electrolytes, while the maximum α s value was achieved as 0.83 for the same 20% duty cycle with a combination of SS + SHP + KF electrolytes.

Synthesis, Optical Performance Characterization, and Durability of Electrospun PTFE-PEO Materials for Space Applications

The Thermo-Mechanical Properties of Carbon-Fiber-Reinforced Polymer Composites Exposed to a Low Earth Orbit Environment

Polymer transfer film formation from cryogenic to elevated temperatures

Molecularly and Structurally Designed Polyimide Nanofiber Radiative Cooling Films for Spacecraft Thermal Management

Porous aluminum oxide insulation materials tested in space mission

Durable and Impact-Resistant Thermoset Polymers for the Extreme Environment of Low Earth Orbit

Thermal Strain in Lightweight Composite Fiber-Optic Gyroscope for Space Application

Core-Shell Composite Nanofibers with High Temperature Resistance, Hydrophobicity and Breathability for Efficient Daytime Passive Radiative Cooling

Ultra-high elongation MXene/polyurethane porous fibers with passive insulation, passive radiative heating and active heating properties for personal thermal management

Poly (arylene Sulfide Sulfone)/polytetrafluoroethylene Composite Film: Thermal, Mechanical, Hydrophobic and Low Dielectric Constant Properties

Al 2 O 3 Encapsulated Teflon Nanostructures with High Thermal Stability and Efficient Antireflective Performance.

Novel High-Strength and High-Temperature Resistant Composite Material for In-Space Optical Mining Applications: Modeling, Design, and Simulation at the Polymer and Atomic/Molecular Levels

Tribological Behavior of Polytetrafluoroethylene Coatings Based on LY12 Substrates in the Space Environment

Al2O3 Encapsulated Teflon Nanostructures with High Thermal Stability and Efficient Antireflective Performance

Flat Absorber Black PEO coatings on Ti6Al4V for spacecraft thermal control application

Preparation of Antistatic AZO/Al2O3-ZnO-Y2O3 Composite Thermal Control Coating and Its Study on Electron-Resistance Radiation Performance

Synergistic Enhancement of the High-Temperature Friction and Wear Behavior of PTFE Matrix Composites with the Addition of CF, PEEK, and TiC

PERFORMANCE OF ORGANIC SILICONE THERMAL CONTROL COATINGS FOR SPACE CRAFT

Thermal Conductivity of Electrospinning Chain-Aligned Polyethylene Oxide (PEO)

Microstructured Reflective Coatings on Commodity Textiles for Passive Personal Cooling

Reducing Temperature Swing of Space Objects with Temperature-Adaptive Solar or Radiative Coating