Abstract:This article proposes a modified deadbeat predictive current control (M-DPCC) method to improve the dynamic performance of permanent magnet synchronous motor (PMSM). Classical DPCC only predicts one control cycle of the PMSM, which restricts the dynamic performance since multiple control cycles are required for the transient state under heavy load and rated speed working condition. The proposed M-DPCC extends the single-step prediction to the entire dynamic interval in the transient state, by which the comprehensive optimization on the angle of the stator voltage vector can be implemented. Moreover, M-DPCC performed multi-step deadbeat calculation to keep the computation modest. To verify the effectiveness of the proposed M-DPCC, transient-state performance of PMSM using the M-DPCC method, the modulated model predictive control and classical DPCC are explored under a wide range of working condition. Comparative simulation and experimental results indicate that dynamic performance of the PMSM can be improved, especially under rated speed and heavy load conditions. Besides, the parameter sensitivity to inductance mismatch of the three methods is carried out. The stable operation range of the M-DPCC under inductance mismatch is larger than the other two methods. Moreover, the computation complexity of the three methods were investigated. The M-DPCC acquired less computation time than the modulated model predictive control.

Rapid and Accurate Calculation of PWM-Induced Harmonic Currents in IPMSMs Considering Hysteresis and Eddy Current Reaction Effects

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

A Sinusoidal Current Control Method for SPMSM Considering Uneven Demagnetization Fault

Hybrid Frame-Based Current Control Scheme for LC-Equipped PMSM with Non-Sinusoidal Back-EMF

Solution of Permanent Magnet Synchronous Motors with Partition between Poles Halbach Magnet

Fast Calculation of Carrier Harmonic Loss in Permanent Magnet of IPMSM Under PWM VSI Supply Over Entire Working Range

Fast calculation of carrier harmonic iron losses caused by pulse width modulation in interior permanent magnet synchronous motors

Compensation of Current Measurement Error in PMSM Drives Based on Virtual Windings

Current Measurement Error Compensation Based on Modified Multiple Complex-Coefficient Filters in PMSM Drives

Quantitative Harmonics Performance Evaluation of High-Speed Permanent Magnet Synchronous Machine under Various Synchronous SVPWM Strategies

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Overall Electrical Parameters Identification for IPMSMs Using Current Derivative to Avoid Rank Deficiency

Transient analysis of PWM inverter-fed AC motor drives using finite element method coupling with external circuit model

Mathematical Modeling of High-Speed PMSM Considering Rotor Eddy Current Reaction Effect

Strategy and Implementation of Harmonic-Reduced Synchronous Optimal PWM for High Speed PMSM

Prediction and Analysis of PWM-Induced Current Ripple of PMSM at Low Switching-to-Fundamental Frequency Ratios

Analytical calculation of rotor magnet eddy-current losses for high speed IPMSM

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

Profiling the Eddy Current Losses Variations of High-Speed Permanent Magnet Machines in Plug-in Hybrid Electric Vehicles

A Similarity Method Based on Spectrum Compression for Calculating Eddy Current Loss in Magnets of PM Machines Fed by PWM Voltage