Abstract:In view of their potential applicability in technology fields where magnets are required to operate at higher temperatures, the class of nanocomposite magnets with little or no rare earth (RE) content has been widely researched in the last two decades. Among these nanocomposite magnets, the subclass of magnetic binary systems exhibiting the formation of L10 tetragonal phases is the most illustrious. Some of the most interesting systems are represented by the Mn-based alloys, with addition of Al, Bi, Ga, Ge. Such alloys are interesting as they are less costly than RE magnets and they show promising magnetic properties. The paper tackles the case of MnGa binary alloys with various compositions around the Mn3Ga stoichiometry. Four MnGa magnetic alloys, with Mn content ranging from 70 at% to 75 at% were produced using rapid solidification to form the melt. By combining structural information arising from X-ray diffractometry and transmission electron microscopy with magnetic properties determined by vibrating sample magnetometry, we are able to document the nature and properties of the structural phases formed in the alloys in their as-cast state and upon annealing, the evolution of the phase structure after annealing and its influence on the magnetic behavior of the MnGa alloys. After annealing at 400 °C and 500 °C, MnGa alloys are showing a multiple-phase microstructure, consisting of co-existing crystallites of L10 and D022 tetragonal phase. As a consequence of these structurally and magnetically different phases, co-existing within the microstructure, promising magnetic features are obtained, with both coercive fields and saturation magnetization exceeding values previously reported for both alloys and layers of MnGa.

Microstructure and magnetic properties of (Mn54Al46)98C2 magnets fabricated by liquid-phase sintering with the Mn65Ga35 as an additive

Microstructure, Magnetism and Critical Behavior of Hot Pressed Ni-Mn-Ga/Al Magnetocaloric Composites with Enhanced Thermal Conductivity and Mechanical Properties

Study on properties of MnAlC magnetic powder and bulk

τ-MnAl with high coercivity and saturation magnetization

Structure and Properties Evolutions for Hard Magnetic MnAl and MnGa Based Alloys Prepared by Melt Spinning or Mechanical Milling

Large Thermal Conductivity and Robust Mechanical Properties of Ni-Mn-Ga/Cu Magnetocaloric Composites Prepared by Spark Plasma Sintering

Phase Transitions and Hard Magnetic Properties for Rapidly Solidified Mnal Alloys Doped with C, B, and Rare Earth Elements

Changes of microstructure and magnetic properties of Nd–Fe–B sintered magnets by doping Al–Cu

Effect of post-sintering annealing on microstructure and coercivity of Al85Cu15-added NdFeB sintered magnets

Magnetic phase transition and magneto-caloric effect (MCE) in (Mn0.5Ni0.5)60+Ga40- (x = 3.3, 5.0, and 6.6) alloys

Structure and Hard Magnetic Properties of MnAl Alloys with C , B , and / or RE Additions

Structure, Magnetostrictive, and Magnetic Properties of Heat-Treated Mn42Fe58 Alloys

In Situ Alloying of Fe-Cr-Co Permanent Magnet by Selective Laser Melting of Elemental Iron, Chromium and Cobalt Mixed Powders

High Magnetic Performance in MnGa Nanocomposite Magnets

Structure, Magnetic Properties and Magnetocaloric Effects of Fe 50 Mn 15− X Co X Ni 35 Alloys

Engineering microstructure to improve coercivity of bulk MnBi magnet

Improved magnetocaloric effects in AlFe2B2 intermetallics through the enhancement of magnetoelastic coupling

Microstructural and magnetic property evolution with different heat-treatment conditions in an alnico alloy

Anisotropic single-variant of (Mn54Al46)97C3

Structural and Magnetic Properties of Mn50Al46Cu4C3 Flakes Obtained by Surfactant-Assisted Ball Milling

Effects of Mg and Sb Substitution on the Magnetic Properties of Magnetic Field Annealed MnBi Alloys