Engineering microstructure to improve coercivity of bulk MnBi magnet

Wei Tang,Gaoyuan Ouyang,Xubo Liu,Jing Wang,Baozhi Cui,Jun Cui

DOI: https://doi.org/10.1016/j.jmmm.2022.169912

IF: 3.097

2022-12-01

Journal of Magnetism and Magnetic Materials

Abstract:MnBi is a candidate material for high-temperature magnets because of its increasing coercivity with increasing temperatures up to 255 °C. However, most efforts in fabricating bulk MnBi magnets have run into the problem of preserving the coercivity (Hcj) of its feedstock powders. About 70% of powder's Hcj would be lost during the densification process. Our micromagnetic modeling shows that the coercivity mechanism of the MnBi bulk magnet is controlled by nucleation of the reversal magnetization domains, and the large Hcj loss that occurred during the powder consolidation process can be attributed to the inter-grain magnetic coupling. To attain a high Hcj, the grains in the MnBi bulk magnet must be separated with a non-magnetic grain boundary phase (GBP). To validate this GBP hypothesis, we engineered MnBi bulk magnets with two different types of GBP. The first type of GBP was created in-situ by precipitating excessive Bi from the grains; the second type was created ex-situ by coating silicates on the feedstock powders before the consolidation. While both GBP work, the ex-situ approach resulted in a better Hcj due to a more uniform GBP distribution. The Hcj loss was reduced from 70% to 15%, and the (BH)max of a warm sintered bulk magnet reached 8.9 MGOe.

materials science, multidisciplinary,physics, condensed matter