Abstract:Background: Robotics is emerging as a promising tool for functional training of human movement. Much of the research in this area over the last decade has focused on upper extremity orthotic devices. Some recent commercial designs proposed for the lower extremity are powered and expensive - hence, these could have limited affordability by most clinics. In this paper, we present a novel un-motorized bilateral exoskeleton that can be used to assist in treadmill training of motor-impaired patients, such as with motor-incomplete spinal cord injury. The exoskeleton is designed such that the human leg will have a desirable swing motion, once it is strapped to the exoskeleton. Since this exoskeleton is un-motorized, it can potentially be produced cheaply and could reduce the physical demand on therapists during treadmill training. Results: A swing-assist bilateral exoskeleton was designed and fabricated at the University of Delaware having the following salient features: (i) The design uses torsional springs at the hip and the knee joints to assist the swing motion. The springs get charged by the treadmill during stance phase of the leg and provide propulsion forces to the leg during swing. (ii) The design of the exoskeleton uses simple dynamic models of sagittal plane walking, which are used to optimize the parameters of the springs so that the foot can clear the ground and have a desirable forward motion during walking. The bilateral exoskeleton was tested on a healthy subject during treadmill walking for a range of walking speeds between 1.0 mph and 4.0 mph. Joint encoders and interface force-torque sensors mounted on the exoskeleton were used to evaluate the effectiveness of the exoskeleton in terms of the hip and knee joint torques applied by the human during treadmill walking. Conclusion: We compared two different cases. In case 1, we estimated the torque applied by the human joints when walking with the device using the joint kinematic data and interface force-torque sensors. In case 2, we calculated the required torque to perform a similar gait only using the kinematic data collected from joint motion sensors. On analysis, we found that at 2.0 mph, the device was effective in reducing the maximum hip torque requirement and the knee joint torque during the beginning of the swing. These behaviors were retained as the treadmill speed was changed between 1-4 mph. These results were remarkable considering the simplicity of the dynamic model, model uncertainty, non-ideal spring behavior, and friction in the joints. We believe that the results can be further improved in the future. Nevertheless, this promises to provide a useful and effective methodology for design of un-motorized exoskeletons to assist and train swing of motor-impaired patients.

KineAssist: a robotic overground gait and balance training device

Configurable, wearable sensing and vibrotactile feedback system for real-time postural balance and gait training: proof-of-concept

Mobile Robotic Balance Assistant (MRBA): a gait assistive and fall intervention robot for daily living

Kinematic Performance of a Customizable Single Degree-of-Freedom Gait Trainer for Cost-Effective Therapy Aimed at Neuromuscular Impairments

Unilateral non-electric assistive walking device helps neurological and orthopedic patients to improve gait patterns

Design and Control of an Omni-Directional Robotic Walker Based on Human–Machine Interaction

Improving Standing Balance Performance through the Assistance of a Mobile Collaborative Robot

Preliminary Evaluation Of Gait Assistance During Treadmill Walking With A Light-Weight Bionic Knee Exoskeleton

Acquisition of Multidrug-Resistant Gram-Negative Bacteria: Incidence and Risk Factors within a Long-Term Care Population

Novel swing-assist un-motorized exoskeletons for gait training

Antigen focusing by specific monomeric immunoglobulin E bound to CD23 on Epstein-Barr virus-transformed B cells.

Design and assessment of a reconfigurable behavioral assistive robot: a pilot study

A robot-based hybrid lower limb system for Assist-As-Needed rehabilitation of stroke patients: Technical evaluation and clinical feasibility

Biomechanical Effects of Robot Assisted Walking on Knee Joint Kinematics and Muscle Activation Pattern.

Cable-Driven Flexible Exoskeleton Robot for Abnormal Gait Rehabilitation

Self-Balancing Exoskeleton Robots Designed to Facilitate Multiple Rehabilitation Training Movements

A 3-DoF robotic platform for the rehabilitation and assessment of reaction time and balance skills of MS patients

Gravity-Balancing Leg Orthosis and Its Performance Evaluation

An adaptive control strategy for postural stability using a wearable robot

Compliant gait assistance triggered by user intention

Assistive Gym: A Physics Simulation Framework for Assistive Robotics