Abstract:The simple design, compactness, simultaneous treatment of multiple contaminants, absence of chemical usage, minimal sludge formation (reducing secondary pollution), low maintenance cost, and versatility to operate in both batch and continuous modes make electrocoagulation (EC) a promising choice for treating various types of industrial wastewater. In this study, EC was employed in batch mode to treat produced water obtained from an oil drilling site, to reuse it for injection purposes in the reservoir. Produced water typically contains high levels of total dissolved solids (TDS), turbidity, chemical oxygen demand (COD), biological oxygen demand (BOD), and oil & grease (O&G) contaminants. High-performing aluminum (Al) electrodes were chosen due to their stability, conductivity, and, most significantly, their high capacity for generating aluminum hydroxide ([Al(OH)3]n) flocs, which serve as carriers for contaminant capture. This compound has demonstrated remarkable effectiveness in trapping the aforementioned contaminants from produced water under various operating conditions, including the number of electrodes, supplied current, and electrode configuration (bipolar and monopolar). The impact of several factors, including the number of electrodes (varying from 4 to 8), current density (varying as 16, 79, 158 A/m 2 ), and electrode configuration (bipolar and monopolar), was studied at room temperature and 250 rpm agitation speed. Initial turbidity, COD, BOD, and O&G concentrations were measured at 38 NTU, 700.7 ppm, 120 ppm, and 32.8 ppm, respectively. The EC treatment exhibited removal efficiencies of 51% for TDS, 85% for turbidity, 78% for COD, 80% for BOD, and 85% for O&G using a monopolar configuration with 8 electrodes, and 59% for TDS, 90% for turbidity, 85% for COD, 84% for BOD, and 86% for O&G using a bipolar configuration with eight electrodes. Additionally, cost estimation, considering electrode dissolution rate and power requirements, was conducted for the operation of both configurations.

Efficient removal of NaOl from mineral processing wastewater using Al-electrocoagulation

Metal ions synergize with gangue minerals to remove residual sodium oleate from mineral processing wastewater

Electrocoagulation in a packed aluminium scraps anode reactor for mineral processing wastewater treatment

Efficient Adsorption of Sodium Oleate from Wastewater with Graphene Oxide/Polyethyleneimine Composite Hydrogel: Performance and Mechanism

Removal of chemical oxygen demand and ammonia nitrogen from lead smelting wastewater with high salts content using electrochemical oxidation combined with coagulation–flocculation treatment

Electrolysis-enhanced coagulation process for highly emulsified oily wastewater treatment: Floc diameter, oil removal performance and mechanism

Removal of chemical oxygen demand and ammonia nitrogen from high salinity tungsten smelting wastewater by one-step electrochemical oxidation: From bench-scale test, pilot-scale test, to industrial test

A novel electrochemical method for the removal of aluminum from ionic rare earth leachate

Mo(VI) removal from water by aluminum electrocoagulation: Cost-effectiveness analysis, main influencing factors, and proposed mechanisms

Electro-Coagulation-Flotation Process for Algae Removal

Control of Ultrafiltration Membrane Fouling Caused by Algal Extracellular Organic Matter (EOM) Using Enhanced Al Coagulation with Permanganate

Effective removal of silica and sulfide from oil sands thermal in-situ produced water by electrocoagulation

Efficient removal of COD, BOD, oil & grease, and turbidity from oil-field produced water via electrocoagulation treatment

Removal of COD from real oily wastewater by electrocoagulation using a new configuration of electrodes

Efficient removal of refractory organics in landfill leachate concentrates by electrocoagulation in tandem with simultaneous electro-oxidation and in-situ peroxone

Revealing the characteristics of coagulant and ·OH generation in the electrocoagulation coupled with E-peroxone process and comparison of the synergistic effect for water purification

Enhanced electrochemical treatment of humic acids and metal ions in leachate concentrate: Experimental and molecular mechanism investigations

Improving electrocoagulation floatation for harvesting microalgae

Using waste to treat waste: clean production of erdite/zeolite composite flocculant from groundwater treatment sludge for real electroplating wastewater treatment

Electrochemical treatment for leachate membrane retentate: Performance comparison of electrochemical oxidation and electro-coagulation technology

Role of reactive manganese and oxygen species in the KMnO4/Na2SO3 process for purification of algal-rich water and membrane fouling alleviation