Relative permeability measurement of coal microchannels using advanced microchip technology

Shaojie Chen,Jicheng Zhang,Dawei Yin,Xianzhen Cheng,Ning Jiang

DOI: https://doi.org/10.1016/j.fuel.2021.122633

IF: 7.4

2022-03-01

Fuel

Abstract:The gas–water flow in coal cleats is an important factor affecting coalbed methane production. However, difficulties are often encountered in the prediction of gas production. Limited understanding of two-phase flow behaviour in microchannels reduces prediction accuracy, often leading to overestimation. In this study, based on micro-computed tomography, advanced microchip technology is used to predict the optimal coal cleat in the polydimethylsiloxane chip. Gas and liquid injection experiments are carried out on the microchannels through the syringe pumps, as the two-phase flow morphology in the system can obtain flow information that cannot be provided by conventional laboratory measurements. The flow capacities of single-phase gas, water, and wetting liquid in the microchannels are compared, alongside determining the flow laws under different wettability and flow rates. The results show that in the single-phase fluid injection experiment, gas is more sensitive to the microchannel size effect than the liquid phase, and hydrophilic liquids flow readily. The gas–water relative permeability value in this study is significantly smaller than that obtained from conventional experiments, based on the steady-state method. This is a result of the gas–water forming a discontinuous plug flow in the microchannel, which produces higher resistance and reduces flow capacity. The occurrence of discontinuous flow regimes challenges the laminar flow assumption adopted in the steady-state method and suggests that conventional laboratory measurements of relative permeability measurements may misrepresent the physics of fluid flows in microchannels. The results also reveal that a hydrophilic environment and a suitable flow rate can increase the two-phase relative permeability. The results of this study enhance our understanding of and approach to core flooding measurement, with the differences in the relative permeability curves indicating that data uncertainty associated with the steady-state method is worthy of further research.

energy & fuels,engineering, chemical