Study on Numerical Simulation of Gas–Water Two-Phase Micro-Seepage Considering Fluid–Solid Coupling in the Cleats of Coal Rocks

Cheng Qian,Yaxi Xie,Xiujun Zhang,Ruiqi Zhou,Bixin Mou

DOI: https://doi.org/10.3390/en17040928

IF: 3.2

2024-02-17

Energies

Abstract:The increasing demand for natural gas energy will promote unconventional natural gas, such as coal seam gas and shale gas, to play a key role in future energy development. The mechanical properties of coal seams are weaker compared with conventional natural gas reservoirs. The fluid–solid coupling phenomenon exists widely at the pore scale and macro scale of coal seams, and runs through the whole process of coalbed gas exploitation. The objective of this study is to establish a microscale gas–water flow model for coalbed methane considering fluid structure coupling. Frist, this study used scanning electron microscopy (SEM) to obtain microscopic pore images of coal rocks. Then, we constructed a numerical model to simulate the movement of coalbed methane and water within the scale of coal cleats based on the Navier–Stokes equation, phase field method, and solid mechanics theory. Finally, we analyzed the effects of injection pressure and wettability on the microscopic two-phase seepage characteristics and displacement efficiency of coal. Our research shows that when the injection pressure is increased from 60 kPa to 120 kPa, the displacement completion time is shortened from 1.3 × 10−4 s to 7 × 10−5 s, and the time is doubled, resulting in a final gas saturation of 98%. The contact angle increases from 45° to 120°, and the final gas saturation increases from 0.871 to 0.992, an increase of 12.2%.

energy & fuels

What problem does this paper attempt to address?

The paper primarily focuses on addressing issues related to gas-water two-phase flow and fluid-solid coupling phenomena during the extraction of Coal Bed Methane (CBM). Specifically, the research aims to establish a microscopic-scale gas-water two-phase flow model that considers the coupling effect between fluid and solid structures. The specific issues the paper attempts to address are as follows:

1. **Establishing a Microscopic Scale Model**: To better understand the microscopic mechanisms of gas-water two-phase flow in coal seams, the researchers constructed a numerical model based on the Navier-Stokes equations, phase field method, and solid mechanics theory. This model can simulate the movement of methane gas and water in coal seam fractures.

2. **Analyzing Influencing Factors**: The study analyzed the impact of different injection pressures and wettability on the characteristics of microscopic two-phase flow and displacement efficiency. For example, when the injection pressure increased from 60 kPa to 120 kPa, the displacement completion time was significantly shortened; and when the contact angle increased from 45° to 120°, the final gas saturation increased by approximately 12.2%.

3. **Exploring Fluid-Solid Coupling Effects**: The paper emphasizes the coexistence of two-phase flow and coal matrix deformation throughout the CBM extraction process and explores the impact of fluid-solid coupling behavior on CBM reservoirs.

4. **Improving Extraction Efficiency**: By simulating the two-phase flow process under different conditions, the researchers aim to reveal the key factors for improving the extraction efficiency of CBM wells, which is crucial for the effective development of CBM.

In summary, this paper aims to deeply understand the complex physical phenomena during the CBM extraction process by establishing and analyzing a gas-water two-phase microscopic flow model that considers fluid-solid coupling. It also provides theoretical basis and technical support for further improving extraction efficiency.